Phase stability and yield stress of Ni-base superalloys containing high Co and Ti
Source abstract
Abstract
Ni-base superalloys containing high Co (>20 wt pct) and Ti (>5.5 wt pct) were designed in order to study the effects of Co16.9 wt pct Ti addition on phase stability and mechanical property. These new alloys, though they contained high Ti, mainly consisted of γ and γ′ phases. Ni3Ti (η) phase was observed along the grain boundaries in some of the alloys. The formation of η phase was mainly related to the Ti/Al ratio, Ti content, and alloy composition. Tensile and compression tests showed that these new alloys exhibited higher yield stress than that of the baseline alloy, TMW-1(U720LI). The possible strengthening mechanisms were discussed in terms of solid-solution and precipitation strengthening effects by the Co16.9 wt pct Ti additions. Preliminary results show promising trends for the development of new superalloys for turbine disc applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. T.P. Gabb, J. Telesman, P.T. Kantzos and K. O’Connor: NASA/TM-2002-211796, Aug. 2002.
2. T.P. Gabb, J. Gayda, J. Telesman, P.T. Kantzos and W.A. Konkel: NASA/TM-2003-212086, Jan. 2003.
3. D. Locq, P. Caron, S. Raujol, F. Pettinari-Sturmel, A. Cougou, and N. Clement: inSuperalloy 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, pp. 179–87.10.7449/2004/Superalloys_2004_179_187 ↗
4. M.C. Hardy, B. Zirbel, G. Shen, and R. Shankar: inSuperalloy 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, pp. 83–90.10.7449/2004/Superalloys_2004_83_90 ↗
5. J. Gayda, T.P. Gabb, and P.T. Kantzos: inSuperalloy 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, pp. 323–29.10.7449/2004/Superalloys_2004_323_329 ↗
6. C.Y. Cui, Y.F. Gu, H. Harada, and A. Sato:Metall. Mater. Trans. A, 2005, vol. 36, pp. 2921–27.10.1007/s11661-005-0065-8 ↗
7. H. Harada, Y.F. Gu, C.Y. Cui, A. Sato, M. Osawa, and T. Kobayashi: Japanese patent 2004-350116.
8. G.K. Bouse: inSuperalloy 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, pp. 163–72.
9. H. Harada, M. Yamazaki, and Y. Koizumi:Tetsu to Hagane, 1979, vol. 65, pp. 1049–58.10.2355/tetsutohagane1955.65.7_1049 ↗
10. T. Murakumo, T. Kobayashi, Y. Koizumi, and H. Harada:Acta Mater., 2004, vol. 52, pp. 3737–44.10.1016/j.actamat.2004.04.028 ↗
11. Y. Ro, Y. Koizumi, and H. Harada:Mater. Sci. Eng., A, 1997, vol. 223, pp. 59–63.10.1016/S0921-5093(96)10504-9 ↗
12. B. Sundman, B. Jansson, and J.O. Andersson:CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
13. T.P. Gabb, A. Garg, D.L. Ellis, and K.M. O’Connor: NASA/TM-2004-213066, 2004.
14. K. Harris, G.L. Erickson, and R.E. Schwer: inSuperalloy 1984, M. Gell, C.S. Kortovich, R.H. Bricknell, W.B. Knet, and J.F. Radavich, eds., TMS, Warrendale, PA, pp. 221–30.10.7449/1984/Superalloys_1984_221_230 ↗
15. J. Groh: inSuperalloy 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowmen, K.A. Green, M. Mclean, S.L. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, pp. 621–26.
16. Annual Book of ASTM Standards 03.01, ASTM, West Conshohocken, PA, 2005, pp. 570–75.
17. C.T. Sims, N.S. Stoloff, and W.C. Hagel:Superalloy II, John Wiley & Sons, New York, NY, 1987, pp. 66–77.
18. J.C. Zhao, V. Ravikumar, and A.M. Beltran:Metall. Mater. Trans. A, 2001, vol. 32, pp. 1271–82.10.1007/s11661-001-0217-4 ↗
19. B.G. Choi, I.S. Kim, D.H. Kim, S.M. Seo, and C.Y. Jo: inSuperalloy 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, pp. 163–71.10.7449/2004/Superalloys_2004_163_171 ↗
20. C.Y. Cui, D.H. Ping, Y.F. Gu, and H. Harada:Mater. Trans., 2006, vol. 37, pp. 2099–102.10.2320/matertrans.47.2099 ↗
21. D.H. Ping, C.Y. Cui, Y.F. Gu, and H. Harada:Ultramicroscopy, in press.
22. R.L. Fleischer:Acta Metall., 1963, vol. 11, pp. 203–09.10.1016/0001-6160(63)90213-X ↗
23. E. Nembach and G. Neite:Progr. Mater. Sci., 1985, vol. 29, pp. 177–319.10.1016/0079-6425(85)90001-5 ↗
24. W. Mangen and E. Nembach:Acta Metall., 1989, vol. 37, pp. 1451–63.10.1016/0001-6160(89)90177-6 ↗
25. J. Jones and D.J.C. MacKay: inSuperalloy 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, pp. 417–24.
26. R.N. Jarrett and J.K. Tien:Metall. Trans. A, 1982, vol. 13, pp. 1021–32.10.1007/BF02643399 ↗