journal article·2000-03

Effect of albite particles on the coefficient of thermal expansion behavior of the Al6061 alloy composites

S. C. Sharma

Publisher page

Abstract

An investigation has been made for the change in coefficient of thermal expansion (CTE) of albite reinforced 6061 aluminum composites. The composites were prepared by the liquid metallurgical technique for varying percentages of albite reinforcement in steps of 0, 2, 4, and 6 pct by weight. This article tries to bring an overall view of fundamentals of various approaches made to measure the CTE of composites including experimental and theoretical methods such as the Turner model, Kerner’s model, Schapery’s model, and the Eshelby model. The result shows the CTE significantly increased with increasing temperature but decreased with increasing reinforcement. The CTE was expected to vary with relative residual strains, which in turn is dependent on the percentage of reinforcement when cooled from 500 °C to room temperature. The CTE values were found to be comparable with theoretical results. The Eshelby model (showed conformance with experimental results) was well suited with the experimental results. The observed behavior of these particulate composites are described on the basis of the thermal residual stresses developed as a result of the difference in the CTE between matrix and reinforcement. This residual stress relaxation is more difficult in the higher weight (above 6 pct) percentage composites at high temperatures, but upon cooling, the residual stresses are found to be relaxed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Majoj K. Jain, Velidandla V. Bhanuprasad, Samir V. Kamat, Avadh B. Pandey, Vijay K. Varama, B.V. Radhakrishna Bhat, and Yashwant R. Mahajan: Int. J. Powder Metall., 1993, vol. 29 (3), p. 267.
2. Deonath, R. Narayan, and P.K. Rohatgi: J. Mater. Sci., 1981, vol. 16, p. 1025.
3. Z.R. Xu, K.K Chawala, R. Mitra, and M.E. Fine: Scripta Metal., 1994, vol. 31, (11), p. 1925.
4. S. Elomari, R. Boukhili, and D.J. Lloyd: Acta Mater., 1996, vol. 44, p. 1873.10.1016/1359-6454(95)00299-5 ↗
5. John E. Allison and Gerald S. Cole: J. Met., 1993, vol. 45, p. 29.
6. R.R. Bowles, D.L. Macini, and M.W. Toaz: Advanced Composites—The Latest Developments, Proc. 2nd Conf. on Advanced Composites, Peter Beardmore and Carl F. Johnson, eds., ASM INTERNATIONAL, Materials Park, OH, 1990, p. 21.
7. Minoru Taya and Richard J. Arsenault: Metal Matrix Composite, Pergamon Press, Inc., Maxwell House, Fairview Park, Elonsford, NY, 1989, p. 177.10.1016/B978-0-08-036984-6.50010-7 ↗
8. S. Skirl, M. Hoffman, K. Bowman, S. Wiederhorn, and J. Rodel: Acta Mater., 1998, vol. 46, p. 2493.10.1016/S1359-6454(98)80033-5 ↗
9. D.K. Balch, T.J. Fitzgerald, V.J. Michaud, A. Mortensen, Y.L. Shen, and S. Suresh: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3700–17.10.1007/BF02595462 ↗
10. M.S. Zedalis, P.S. Gilman, and S.K. Das: High Performance Composites for the 1990’s, TMS, Warrendale, PA, p. 61.
11. R.R. Tummala and A.L. Friedberg: J. Appl. Phys., 1970, vol. 41, p. 5104.10.1063/1.1658618 ↗
12. S. Elomari, R. Boukhili, M.D. Skibo, and J. Masounave: J. Mater. Sci., 1995, vol. 30, p. 3037.10.1007/BF01209214 ↗
13. D.J. Lloyd: Acta Metall. Mater., 1991, vol. 39, p. 59.10.1016/0956-7151(91)90328-X ↗
14. Rajendra U. Vaidya and K.K. Chawla: Comp. Sci. Technol., 1994, vol. 50, p. 13.10.1016/0266-3538(94)90122-8 ↗
15. R. Mehrabian, R.G. Riek, and M.C. Flemings: Metall. Trans., 1974, vol. 5, p. 1899–1905.10.1007/BF02644158 ↗
16. S. Elomari, M.D. Skibo, A. Sundarajan, and D. Richards: Comp. Sci. Technol., 1998, vol. 58, p. 369.10.1016/S0266-3538(97)00124-3 ↗
17. P.S. Turner: J. Res., NBS, 1946, vol. 37, p. 236.
18. E.H. Kerner: Proc. Phys. Soc., 1956, vol. 69, p. 808.10.1088/0370-1301/69/8/305 ↗
19. S.A. Schapery: J. Comp. Mater., 1968, vol. 2, p. 380.10.1177/002199836800200308 ↗
20. Z. Hashin and J. Shtrikman: Metall. Mater. Trans. A, 1996, vol. 27A, p. 3700.
21. Minoru Taya and Richard J. Arsenault: Metal Matrix Composites, 1989, p. 180.
22. Y. Tako: Recent Advances in Composites in the United States and Japan, ASTM STP 864, J.R. Vinson and M. Taya, ASTM, Philadelphia, PA, 1985, p. 685.10.1520/STP32821S ↗
23. T. Mura: Micromechanics of Defects in Solids, 2nd ed., Martinis Nijhoff, Hingham, MA, 1987, p. 576.10.1007/978-94-009-3489-4 ↗
24. M. Durman and S. Murphy: J. Mater. Sci., 1997, vol. 32, p. 1603.10.1023/A:1018595110144 ↗
25. Z.R. Xu, K.K. Chawla, R. Mitra, and M.E. Fine: Scripta Metall., 1994, vol. 31 (11), p. 1525.10.1016/0956-716X(94)90068-X ↗
26. Denoath, R. Narayan, and P.K. Rohatgi: J. Mater. Sci., 1981, vol. 16, p. 3026.
27. M.A. Dellis, J.P. Keustermans, and Delanny: Mater. Sci. Eng., 1991, vol. 135A, p. 235.
28. V. Rzhevsky and G. Novik: The Physics of Rocks, Mir Publishers, Moscow, 1967, p. 271.
29. Jianxin Fang, M.P. Harmer, and H.M. Chan: J. Mater. Sci., 1997, vol. 32, p. 3427.10.1023/A:1018672717239 ↗
30. P.S. Turner: Nat. Bur. Standards J. Res., 1946, vol. 37, p. 1745.10.6028/jres.037.015 ↗