Homogenization of metal matrix composites by high-pressure torsion
Source abstract
Abstract
This article deals with the homogenization of metal matrix composites (MMCs) with inhomogeneous particle distribution by severe plastic deformation. In this study, Al6061-10 pct SiC and Al6061-20 pct Al2O3 powder metallurgy (PM) MMCs with clustered particle distribution in the as-fabricated condition are subjected to high-pressure torsion (HPT) at room temperature. The evolution of the microstructure during HPT is investigated. It is shown that, in the two materials, two different types of particle clusters appear that behave differently during deformation. In MMCs with dense particle clusters, the process of declustering during HPT occurs through a mechanism of particle debonding from the surface of the clusters. On the contrary, in MMCs with diffuse particle clusters, the deformation of the clusters is mainly responsible for the homogenization; therefore, the strain necessary to obtain a homogeneous particle distribution can be predicted by the Tan and Zhang model (M.J. Tan and X. Zhang: Mater. Sci. Eng. A, 1998, vol. 244, pp. 80–85).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. T.V. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, Cambridge, United Kingdom, 1993.10.1017/CBO9780511623080 ↗
2. D.J. Lloyd: Acta Metall. Mater., 1991, vol. 42, pp. 59–71.10.1016/0956-7151(91)90328-X ↗
3. Z. Wang, T.K. Chen, and D.J. Lloyd: Metall. Trans. A, 1993, vol. 24A, pp. 197–207.10.1007/BF02669616 ↗
4. T. Christman, A. Needleman, and S. Suresh: Acta Metall., 1989, vol. 37, pp. 3029–50.10.1016/0001-6160(89)90339-8 ↗
5. M.J. Tan and X. Zhang: Mater. Sci. Eng. A, 1998, vol. 244, pp. 80–85.10.1016/S0921-5093(97)00829-0 ↗
6. D.L. Zhang: Progr. Mater. Sci., 2004, vol. 49, pp. 537–60.10.1016/S0079-6425(03)00034-3 ↗
7. Manual guide to the program “analySIS”, Soft Imaging System, Germany, 2001.
8. J.P. Myles, E.C. Flenley, N.R.J. Fieller, H.V. Atkinson, and H. Jones: Phil. Mag. A, 1995, vol. 72, pp. 515–28.10.1080/01418619508239936 ↗
9. A.M. Murphy, S.J. Howard, and T.W. Clyne: Mater. Sci. Technol., 1998, vol. 14, pp. 959–68.10.1179/026708398790613353 ↗
10. P.A. Karnezis, G. Durrant, and B. Cantor: Mater. Characterization, 1998, vol. 40, pp. 97–109.10.1016/S1044-5803(97)00106-X ↗
11. A. Rogers: Statistical Analysis of Spatial Dispersions: The Quadrat Method, Pion, London, 1974.
12. I. Sabirov, O. Kolednik, R.Z. Valiev, and R. Pippan: Acta Mater., in publication.
13. P.B. Prangnell, S.J. Barnes, S.M. Roberts, and P.J. Withers: Mater. Sci. Eng. A, 1996, vol. 220, pp. 41–56.10.1016/S0921-5093(96)10461-5 ↗
14. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
15. H.P. Stüwe: Adv. Eng. Mater., 2003, vol. 5, pp. 291–95.10.1002/adem.200310085 ↗
16. T. Hebesberger, H.P. Stüwe, A. Vorhauer, F. Wetscher, and R. Pippan: Acta Mater., 2005, vol. 53, pp. 393–402.10.1016/j.actamat.2004.09.043 ↗