Ambient- to elevated-temperature fracture and fatigue properties of Mo-Si-B alloys: Role of microstructure
Source abstract
Abstract
Ambient- to elevated-temperature fracture and fatigue-crack growth results are presented for five Mo-Mo3Si-Mo5SiB2-containing α-Mo matrix (17 to 49 vol pct) alloys, which are compared to results for intermetallic-matrix alloys with similar compositions. By increasing the α-Mo volume fraction, ductility, or microstructural coarseness, or by using a continuous α-Mo matrix, it was found that improved fracture and fatigue properties are achieved by promoting the active toughening mechanisms, specifically crack trapping and crack bridging by the α-Mo phase. Crack-initiation fracture toughness values increased from 5 to 12 MPa√m with increasing α-Mo content from 17 to 49 vol pct, and fracture toughness values rose with crack extension, ranging from 8.5 to 21 MPa√m at ambient temperatures. Fatigue thresholds benefited similarly from more α-Mo phase, and the fracture and fatigue resistance was improved for all alloys tested at 1300 °C, the latter effects being attributed to improved ductility of the α-Mo phase at elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. M.J. Donachie: Superalloys: A Technical Guide, 2nd ed., ASM, Metals Park, OH, 2002, p. 439.10.31399/asm.tb.stg2.9781627082679 ↗
2. M.K. Meyer, M.J. Kramer, and M. Akinc: Intermetallics, 1996, vol. 4, pp. 273–81.10.1016/0966-9795(95)00048-8 ↗
3. M. Akinc, M.K. Meyer, M.J. Kramer, A.J. Thom, J.J. Heubsch, and B. Cook: Mater. Sci. Eng., 1999, vol. A261, pp. 16–23.10.1016/S0921-5093(98)01045-4 ↗
4. M.K. Meyer and M. Akinc: J. Am. Ceram. Soc., 1996, vol. 79, pp. 2763–66.10.1111/j.1151-2916.1996.tb08528.x ↗
5. M.K. Meyer, A.J. Thom, and M. Akinc: Intermetallics, 1999, vol. 7, pp. 153–62.10.1016/S0966-9795(98)00058-2 ↗
6. D.M. Berczik: United Technologies Corporation, East Hartford, CT, U.S. Patent 5,595,616, 1997.
7. D.M. Berczik: United Technologies Corporation, East Hartford, CT, U.S. Patent 5,693,156, 1997.
8. H. Choe, D. Chen, J.H. Schneibel, and R.O. Ritchie: Intermetallics, 2001, vol. 9, pp. 319–29.10.1016/S0966-9795(01)00008-5 ↗
9. H. Choe, J.H. Schneibel, and R.O. Ritchie: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 25–239.
10. J.J. Kruzic, J.H. Schneibel, and R.O. Ritchie: Scripta Mater., 2004, vol. 50, pp. 459–64.10.1016/j.scriptamat.2003.11.002 ↗
11. J.H. Schneibel, R.O. Ritchie, J.J. Kruzic, and P.F. Tortorelli: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 525–31.10.1007/s11661-005-0166-4 ↗
12. J.H. Schneibel, M.J. Kramer, and D.S. Easton: Scripta Mater., 2002, vol. 46, pp. 217–21.10.1016/S1359-6462(01)01227-1 ↗
13. ASTM E561-98: Annual Book of ASTM Standards, vol. 03.01, Metals-Mechanical Testing; Elevated and Low-Temperature Tests; Metallography, ASTM, West Conshohocken, PA, 2002, pp. 534–46.
14. C.J. Gilbert, J.M. McNaney, R.H. Dauskardt, and R.O. Ritchie: J. Testing Eval., 1994, vol. 22, pp. 117–20.10.1520/JTE12644J ↗
15. D. Chen, C.J. Gilbert, and R.O. Ritchie: J. Testing Eval., 2000, vol. 28, pp. 236–41.10.1520/JTE12100J ↗
16. ASTM E647-00: Annual Book of ASTM Standards, vol. 03.01, Metals-Mechanical Testing: Elevated and Low-temperature Tests; Metallography, ASTM, West Conshohocken, PA, 2002, pp. 595–635.
17. D.M. Dimiduk and J.H. Perepezko: MRS Bull., 2003, vol. 28, pp. 639–45.10.1557/mrs2003.191 ↗
18. K.T. Venkateswara Rao, W.O. Soboyejo, and R.O. Ritchie: Metall. Trans. A, 1992, vol. 23A, pp. 2249–57.
19. I. Rosales and J.H. Schneibel: Intermetallics, 2000, vol. 8, pp. 885–89.10.1016/S0966-9795(00)00058-3 ↗
20. C.F. Shih: J. Mech. Phys. Solids, 1981, vol. 29, pp. 305–26.10.1016/0022-5096(81)90003-X ↗
21. A. Buch: Pure Metals Properties: a Scientific-Technical Handbook, ASM INTERNATIONAL, Materials Park, OH, 1999, p. 306.
22. K. Ito, K. Ihara, K. Tanaka, M. Fujikura, and M. Yamaguchi: Intermetallics, 2001, vol. 9, pp. 591–602.10.1016/S0966-9795(01)00049-8 ↗
23. J.G. Swadener, I. Rosales, and J.H. Schneibel: in High-Temperature Ordered Intermetallic Alloys IX, J.H. Schneibel, S. Hanada, K.J. Hemker, R.D. Noebe, and G. Sauthoff, eds., Materials Research Society, Warrendale, PA, 2001, pp. N4.2.1-N4.2.6.
24. R.O. Ritchie: Int. J. Fract., 1999, vol. 100, pp. 55–83.10.1023/A:1018655917051 ↗
25. J.H. Schneibel, C.T. Liu, D.S. Easton, and C.A. Carmichael: Mater. Sci. Eng., 1999, vol. A261, pp. 78–83.10.1016/S0921-5093(98)01051-X ↗
26. J.H. Schneibel, P.F. Tortorelli, M.J. Kramer, A.J. Thom, J.J. Kruzic, and R.O. Ritchie: in Defect Properties and Related Phenomena in Intermetallic Alloys, E.P. George, M.J. Mills, H. Inui, and G. Eggeler, eds., Materials Research Society, Warrendale, PA, 2003, pp. 53–58.
27. V. Supatarawanich, D.R. Johnson, and C.T. Liu: Mater. Sci. Eng., 2003, vol. A344, pp. 328–39.10.1016/S0921-5093(02)00446-X ↗
28. J.H. Schneibel: Intermetallics, 2003, vol. 11, pp. 625–32.10.1016/S0966-9795(03)00044-X ↗
29. A. Kumar and B.L. Eyre: Proc. R. Soc. London A, 1980, vol. 370, pp. 431–58.10.1098/rspa.1980.0043 ↗
30. J. Wadsworth, T.G. Nieh, and J.J. Stephens: Scripta Mater., 1986, vol. 20, pp. 637–42.10.1016/0036-9748(86)90481-3 ↗
31. N.E. Promisel: The Science and Technology of Tungsten, Tantalum, Molybdenum, Niobium and Their Alloys, Pergamon Press, The MacMillan Company, New York, NY, 1964, p. 588.
32. L.S. Sigl, P.A. Mataga, B.J. Dalgleish, R.M. McMeeking, and A.G. Evans: Acta Metall., 1988, vol. 36, pp. 945–53.10.1016/0001-6160(88)90149-6 ↗
33. M.F. Ashby, F.J. Blunt, and M. Bannister: Acta Metall., 1989, vol. 37, pp. 1847–57.10.1016/0001-6160(89)90069-2 ↗
34. B.D. Flinn, M. Rühle, and A.G. Evans: Acta Metall., 1989, vol. 37, pp. 3001–06.10.1016/0001-6160(89)90336-2 ↗
35. D.R. Bloyer, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2483–96.10.1007/s11661-998-0220-0 ↗
36. J.P. Campbell, K.T. Venkateswara Rao, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 563–77.10.1007/s11661-999-0048-2 ↗
37. R.W. Steinbrech, A. Reichl, and W. Schaarwächter: J. Am. Ceram. Soc., 1990, vol. 73, pp. 2009–15.10.1111/j.1151-2916.1990.tb05260.x ↗
38. B.P. Bewlay, M.R. Jackson, J.-C. Zhao, P.R. Subramanian, M.G. Mendiratta, and J.J. Lewandowski: MRS Bull., 2003, vol. 29, pp. 646–53.10.1557/mrs2003.192 ↗
39. B.P. Bewlay, M.R. Jackson, and H.A. Lipsitt: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3801–08.10.1007/BF02595629 ↗
40. J.D. Rigney and J.J. Lewandowski: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3292–306.10.1007/BF02663879 ↗
41. W.A. Zinsser, Jr. and J.J. Lewandowski: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1749–57.10.1007/s11661-998-0098-x ↗
42. K.S. Chan and D.L. Davidson: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1833–49.10.1007/s11661-003-0149-2 ↗
43. C.J. Gilbert, J.J. Cao, W.J. Moberly Chan, L.C. De Jonghe, and R.O. Ritchie: Acta Metall. Mater., 1996, vol. 44, pp. 3199–214.10.1016/1359-6454(95)00409-2 ↗