Qualitative model for creep of AZ91D magnesium alloy
Source abstract
Abstract
Creep properties of specimens taken from the core of AZ91D magnesium alloy ingots (9 pct Al, 1 pct Zn) were examined in the temperature range of 120 °C to 180 °C and stress range of 40 to 115 MPa. Solution-treated and aged creep specimens were also tested. The creep rates observed were about three orders of magnitude lower than those of pure magnesium, and elongations to fracture were seen to be at least twice those of pure magnesium. A minimum creep rate was reached after approximately 2/3 of the creep life of the specimens (except for the aged specimens, in which the minimum creep rate appears at the beginning of the test). A qualitative model for the creep process in proposed on the basis of the creep tests and optical, scanning electron, and transmission electron microscopy. This model proposes that dislocation motion on additional slip systems is the primary creep mechanism and that cracking acts as a stress relief mechanism. Structural instability dictates the amount of hardening and, hence, creep resistance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. M. Regev, E. Aghion, M. Bamberger, and A. Rosen: Mater. Sci. Eng., 1998, vol. A252, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
2. M. Regev, E. Aghion, M. Bamberger, S. Berger, and A. Rosen: Mater. Sci. Eng., 1998, vol. A257, pp. 349–52.
3. A. Luo and M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259–71.10.1007/BF01171534 ↗
4. T.K. Aune and H. Westengen: DGM Conf. on Magnesium Alloys and Their Applications, B.L. Mordike, eds. Deutsche Gesellschaft fur Materialkunde e. V., Oberursel, 1992, pp. 221–28.
5. W.E. Mercer II: Technical Paper Series SAE Int. Congr. and Exp., SAE, Detroit, MI, 1990, paper no. 900788.
6. D.J. Sakkinen: Technical Paper Series SAE Int. Congr. and Exp., SAE, Detroit, MI, 1994, pp. 71–82.
7. H. Gjestland, G. Nussbaum, G. Regazzoni, O. Lohne, and ø Bauger: Mater. Sci. Eng., 1991, vol. A134, pp. 1197–1200.10.1016/0921-5093(91)90954-L ↗
8. G. Nussbaum, P. Bridot, T.J. Warner, J. Charbonnier, and G. Regazzoni: DGM Conf. on Magnesium Alloys and Their Applications, B.L. Mordike, ed., Deutsche Gesellschaft fur Materialkunde e. V., Oberursel, 1992, pp. 351–58.
9. G.V. Raynor: The Physical Metallurgy of Magnesium and Its Alloys, Pergamon Press, Elmsford, NY, 1959.
10. W.K. Miller: Metall. Trans. A, 1991, vol. 22A, pp. 873–77.10.1007/BF02658997 ↗
11. G. Foerester: 8th SDCE Int. Die Casting Exp. Congr., The Society of Die Casting Engineers, Detroit, MI, 1975, paper no. G-T75-112.
12. M.O. Pekguleryuz and M.M. Avedesian: J. Jpn. Inst. Light Met., 1992, vol. 42, pp. 679–86.10.2464/jilm.42.679 ↗
13. M.O. Pekguleryuz, A. Lou, P. Vermette, and M.M. Avedesian: Proc. 50th Annual Meeting of IMA, IMA, Washington, D.C., 1993, pp. 20–26.
14. T.K. Aune and T.J. Ruden: Technical Paper Series SAE Int. Congr. Exp., SAE, Detroit, MI, 1992, paper no. 920070.
15. C. Suman: Technical Paper Series SAE Int. Congr. and Exp., SAE, 1991, paper no. 91046.
16. L. Albright and T.K. Aune: Technical Paper Series SAE Int. Congr. Exp., SAE, Detroit, MI, 1991, paper no. 910412.
17. K. Lovold: Z. Metallkd., 1976, vol. 67 (8), pp. 514–17.
18. A. Mwembela and H.J. McQueen: Light Metals Processing and Applications Symp. C., Canadian Institute of Mining and Metallurgy, Bickert, eds., Montreal, Canada, 1993, pp.523–32.
19. K. Milička, J. Čadek, and P. Rys: Acta Metall., 1970, vol. 18, p. 1071.10.1016/0001-6160(70)90005-2 ↗
20. W.J. McG. Tegart: Acta Metall., 1961, vol. 9, pp. 614–17.10.1016/0001-6160(61)90166-3 ↗
21. S.S. Vagarali and T.G. Langdon: Acta Metall., 1981, vol. 29, pp. 1969–81.10.1016/0001-6160(81)90034-1 ↗
22. B. Wielke: Met. Sci., 1974, vol. 8, pp. 91–94.10.1016/0036-9748(74)90450-5 ↗
23. R. Chaudhuri, H.C. Chang, and N.J. Grant: Trans. Am. Inst. Min. Metall. Eng., 1955, vol. 203, pp. 682–88.
24. A. Orlova, K. Milička, and J. Čadek: Z. Metallkd. 1972, vol. 63 (2), pp. 89–93.
25. S. Roberts: Trans. Am. Inst. Min. Metall. Eng., 1953, pp. 1121–26.
26. R. Chaudhuri, N.J. Grant, and J.T. Norton: Trans. Am. Inst. Min. Metall. Eng., 1953, pp. 712–16.
27. K. Milička: Z. Metallkd., 1970, vol. 61 (2), pp. 143–51.
28. H. Conard, L. Hays, G. Schoeck, and H. Wiedersich: Acta Metall., 1961, vol. 9, pp. 367–78.10.1016/0001-6160(61)90230-9 ↗
29. S.S. Vagarali and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 1157–70.10.1016/0001-6160(82)90009-8 ↗
30. W. Blum, F. Breutinger, B. Watzinger, J. Kroc, P. Weidinger, and R. Rosch Proc. 1st Israeli Int. Conf. on Magnesium Science and Technology, E. Aghion and D. Eliezer, eds. 1997, pp. 151–56.
31. W. Blum, B. Watzinger, and P. Weidinger: Proc. of the Magnesium Alloys and their Applications Conf., B.L. Mordike and K.U. Kainer, eds., Werkstoff-Informationsgesellschaft mbH, Wolfsburg, Germany, 1998, pp. 49–60.
32. B. Watzinger, P. Weidinger, F. Breutinger, and W. Blum: Proc. Magnesium Alloys and Their Applications Conf. B.L. Mordike and K.U. Kainer, eds. Werkstoff-Informationsgesellschaft mbH, Wolfsburg, Germany, 1998, pp. 259–64.
33. J.P. Hirth and J. Lothe: Theory of Dislocations, McGraw-Hill Book Company, New York, NY, 1982.
34. M. Regev, M. Bamberger, and A. Rosen: Proc. of the Magnesium Alloys and their Applications Conf., B.L. Mordike and K.U. Kainer, eds. Werkstoff-Informationsgesellschaft mbH, Wolfsburg, Germany, 1998, pp. 283–88.
35. A Finkel, M. Regev, E. Aghion, M. Bamberger, and A. Rosen: Proc. 1st Israeli Int. Conf. on Magnesium Science and Technology, E. Aghion and D. Eliezer, eds. 1997, pp. 121–26.
36. J.B. Clark: Acta Metall., 1968, vol. 16, pp. 141–52.10.1016/0001-6160(68)90109-0 ↗
37. M.F. Ashby and D.R.H. Jones: Engineering Materials, Pergamon Press, Elmsford, NY, 1980.
38. V. Sklenička: Mater. Sci. Eng., 1997, vols. A234–A236, pp. 30–36.10.1016/S0921-5093(97)00172-X ↗
39. A.H. Cottrell: Dislocations and Plastic Flow in Crystals, 1st ed., Oxford University Press, Oxford, United Kingdom, 1953.
40. J. Friedel: Dislocations, Pergamon Press, Elmsford, N.Y., 1964.
41. J.W. Edington: Practical Electron Microscopy, Philips’ Gloeilampenfabrieken, Eindhoven, Netherlands, 1975.
42. D.G. Brandon and W.D. Kaplan: Joining Processes—An Introduction, 1st ed., John Wiley and Sons, New York, NY, 1997.
43. A.F. Crawley and K.S. Milliken: Acta Metall., 1974, vol. 22, pp. 557–62.10.1016/0001-6160(74)90152-7 ↗
44. A.F. Crawley and B. Lagowski: Metall. Trans., 1974, vol. 5, pp. 949–51.10.1007/BF02643153 ↗
45. D. Hull: Introduction to Dislocations, 2nd printing, Pergamon Press, Elmsford, NY, 1968.
46. D.H. Avery and W.A. Backofen: Trans. TMS-AIME, 1963, vol. 227, pp. 835–38.