Improving the creep properties of 9Cr-3W-3Co-NbV steels and their weld joints by the addition of boron
Source abstract
Abstract
New ferritic steels with a controlled addition of boron have been developed recently for ultrasuper-critical fossil power plants. These steels possess excellent creep resistance compared to conventional steels like P91, P92, P122, etc., and this has been attributed to the delay in coarsening of the carbides during creep owing to partial replacement of carbon by boron in these carbides. However, the susceptibility of the weld joints of the boron-containing ferritic steels to type IV cracking, which significantly brings down the rupture life of the weld joints, has not been investigated so far. In the present work, the creep properties of recently developed 9Cr-3W-3Co-NbV steels with boron contents varying from 47 to 180 ppm and of their weld joints have been studied. Creep tests were carried out at 923 K in the stress range of 140 to 80 MPa. Specimens were examined for particle coarsening using field-emission scanning electron microscopy, and the boron content in the precipitates was estimated using field-emission auger electron spectroscopy (FE-AES). The grain size of the parent metal and the heat-affected zone (HAZ) were estimated using electron backscattered pattern (EBSP) imaging. Results showed that the creep properties of the steels with 90 and 130 ppm boron and of their weld joints are superior to those of the P92 steels and its weld joints. Further, no weld joints exhibited type IV cracking. No significant coarsening of the carbides was observed, not only in the parent metal but also in the HAZ of the steels with ≥90 ppm of boron. In addition to the delay in carbide coarsening, the large prior-austenite grain size of the parent metal and the absence of a conventional fine-grained HAZ (FGHAZ) in the weld joints also seem to have a beneficial effect on improving the creep properties of these steels and their weld joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. T.-U. Kern, M. Staubli, and B. Scarlin: Iron Steel Inst. Jpn. Int., 2002, vol. 42, pp. 1515–19.10.2355/isijinternational.42.1515 ↗
2. R. Agamennone, C. Berger, W. Blum, J. Ehlers, P.J. Ennis, J. Granacher, G. Inden, V. Knezevic, J.W. Quadakkers, G. Sauthoff, A. Scholz, L. Singheiser, J. Vilk, and Y. Wang: in Materials for Advanced Power Engineering 2002, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum, Julich, Germany, 2002, pp. 1279–88.
3. F. Abe, H. Okada, S. Wnanikawa, M. Tabuchi, T. Itagaki, K. Kimura, K. Yamaguchi, and M. Igarashi: in Materials for Advanced Power Engineering, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum, Julich, Germany, 2002, pp. 1397–406.
4. N. Takahasi, T. Fujita, and T. Yamada: Tetsu to Hagané, 1975, vol. 61, pp. 2263–73 (in Japanese).10.2355/tetsutohagane1955.61.9_2263 ↗
5. L. Lundin, S. Fallman, and H.-O. Andren: Mater. Sci. Technol., 1997, vol. 13, pp. 233–42.10.1179/mst.1997.13.3.233 ↗
6. T. Horiuchi, M. Igarashi, and F. Abe: Iron Steel Inst. Jpn. Int. 2002, vol. 42, Suppl., pp. S67-S71.10.2355/isijinternational.42.Suppl_S67 ↗
7. M. Arai, H. Doi, Y. Fukui, T. Azuma, and T. Fujita: in Materials for Advanced Power Engineering 2002, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum, Julich, Germany, 2002, pp. 1269–78.
8. K. Spiradek-Hahn, P. Nwakowski, and G. Zeiler: in Advances in Material Technology for Fossil Power Plants, R. Viswanathan, W.T. Bakker, and J.D. Parker, eds., The Institute of Materials, London, 2001, pp. 165–75.
9. T. Muraki, Y. Hasegawa, H. Tamehiro, M. Ohgami, N. Maruyama, and M. Mikami: in Advances in Material Technology for Fossil Power Plants, R. Viswanathan, W.T. Bakker, and J.D. Parker, eds., The Institute of Materials, London, 2001, pp. 437–46.
10. L. Shou, M. Chen, J. Dong, and X. Ma: Proc. 4th Japan-China Bilateral Symp. on High Temperature Strength of Materials, M. Sakane and S.-Tung Tu, eds., The Society of Material Science, Tsukuba, Japan, 2001, pp. 79–82.
11. P. Hofer, M.K. Miller, S.S. Babu, S.A. David, and H. Cerjak: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 975–8410.1007/s11661-000-0039-9 ↗
12. F.V. Ellis and R. Viswanathan: Review of Type IV Cracking in Piping Welds, Integrity of High Temperature Welds, Professional Publishing Ltd., London, 1998, pp. 125–34.
13. K. Bell: “Elevated Temperature Midlife Weldment Cracking,” Report No. 597/1997, The Welding Institute, Abington, United Kingdom, 1997.
14. S.K. Albert, M. Matsui, T. Watanabe, H. Hongo, K. Kubo, and M. Tabuchi: Int. J. Pressure Vessel Piping, 2003, vol. 80, pp. 405–13.10.1016/S0308-0161(03)00072-3 ↗
15. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, J. Kinugawa, and F. Abe: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. S126-S130.10.2355/isijinternational.41.Suppl_S126 ↗
16. S.K. Albert, M. Tabuchi, H. Hongo, T. Watanabe, K. Kubo and M. Matsui: Sci. Technol. Welding Joining, in press.
17. T. Azuma, K. Miki, and Y. Tanaka: in Advances in Material Technology for Fossil Power Plants, R. Viswanathan, W.T. Bakker, and J.D. Parker, eds., The Institute of Materials, London, 2001, pp. 177–86.
18. M. Svoboda, J. Bursik, I. Podstranska, A. Kroupa, V. Sklenicka, and K.-H. Mayer: Materials for Advanced Power Engineering 2002, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum, Julich, Germany, 2002, pp. 1521–30.
19. T. Uehara, A. Toji, S. Komatsubara, and T. Fujita: Materials for Advanced Power Engineering 2002, J. Lecomte-Beckers, M. Carton, F. Schubert, and P.J. Ennis, eds., Forschungszentrum, Julich, Germany, 2002, pp. 1311–20.
20. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, S.L. Mannan, and D.H. Sastry: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 115–24.10.1007/s11661-001-0107-9 ↗
21. K. Laha, K.S. Chandravathi, K. Bhanu Sankara Rao, and S.L. Mannan: in Advances in Material Technology for Fossil Power Plants, R. Viswanathan, W.T. Bakker, and J.D. Parker, eds., The Institute of Materials, London, 2001, pp. 309–17.
22. M. Matsui, M. Tabuchi, T. Watanabe, K. Kubo, and F. Abe: J. Soc. Mater. Sci., Jpn., 2003, vol. 52, pp. 119–23 (in Japanese).10.2472/jsms.52.119 ↗
23. N. Shinya, J. Kyono, and K. Laha: Materials Science Forum, Trans Tech Publications, Aedermannsdorf, Swtizerland, 2003, vols. 426–432, pp. 1107–12.