Thermal stability of electroless-nickel/solder interface: Part A. interfacial chemistry and microstructure
Source abstract
Abstract
The thermal stability of the interface between the Sn-Pb eutectic alloy and an electroless Ni-P coating was examined by cross-sectional transmission electron microscopy (TEM). The interface was formed by reflowing the eutectic Sn-Pb solder alloy between electroless Ni-P deposits. The microchemistry and microstructure of the interface were analyzed in the as-reflowed, mild-aged, and overaged conditions, by energy-dispersive spectroscopy (EDS), selected-area electron diffraction (SAD) convergentbeam electron diffraction (CBED), and bright- and dark-field imaging. In the as-reflowed condition, the interfacial microstructure consisted of a thin Ni3Sn4 intermetallic layer and a thin P-rich layer. The P-rich layer was composed of two phases, face-centered cubic (fcc) Ni and Ni3P, and the excess P was primarily due to the ejection of P from the electroless Ni-P when it reacted with Sn in the reflow process. Following the mild aging, a trilayer interfacial microstructure was found, including a coarsened Ni3Sn4 layer, a P-rich layer with increased P concentration, and a P-deficient layer. With overaging, a multilayer interfacial microstructure was developed, which consisted of two Ni-Sn intermetallic layers, Ni3Sn4 and Ni3Sn2, and three distinct P-rich layers, Ni12P5, Ni12P5 + Ni3P, and Ni3P + Ni.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Semiconductor materials and interfaces · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. John H. Lau and Yi-Hsin Pao: Solder Joint Reliability of BGA, CSP, Flip Chip and Fine Pitch SMT Assemblies, McGraw-Hill Book Co., New York, NY, 1997.
2. L. Quan, D. Frear, D. Grivas, and J.W. Morris Jr.: J. Electronic Mater., 1987, vol. 16, pp. 203–08.10.1007/BF02655488 ↗
3. H.N. Keller: IEEE Trans. Comp. Hybrids, Manuf. Technol., 1986, vol. CHMT-9, pp. 433–39.10.1109/TCHMT.1986.1136673 ↗
4. D.R. Frear and P.T. Vianco: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1509–23.10.1007/BF02665483 ↗
5. D. Gravas, D. Frear, L. Quan, and J.W. Morris Jr.: J. Electronic Mater., 1986, vol. 15, pp. 355–59.10.1007/BF02661885 ↗
6. A.J. Sunwoo, J.W. Morris, Jr., and G.K. Lucey, Jr.: Metall. Trans. A, 1992, vol. 23A, pp. 1323–32.10.1007/BF02665064 ↗
7. Z. Mei, A.J. Sunwoo, and J.W. Morris, Jr.: Metall. Trans. A, 1992, vol. 23A, pp. 857–64.10.1007/BF02675563 ↗
8. H.K. Kim, H.K. Liou, and K.N. Tu: Appl. Phys. Lett., 1995, vol. 66, pp. 2337–39.10.1063/1.113975 ↗
9. H.K. Kim and K.N. Tu: Phys. Rev. B, 1996, vol. 53, pp. 16027–16034.10.1103/PhysRevB.53.16027 ↗
10. B.J. Lee, N.M. Hwang, and H.M. Lee: Acta Metall., 1997, vol. 45, pp. 1867–74.
11. A.C.K. So, Y.C. Chan, and J.K.L. Lau: IEEE Trans. Comp. Packaging Manuf. Technol.-Part B, 1997, vol. 20, pp. 161–66.10.1109/96.575568 ↗
12. M. Schaffer, R.A. Fournelle, and J. Liang: J. Electronic Mater., 1998, vol. 27, pp. 1167–76.10.1007/s11664-998-0066-7 ↗
13. Y.G. Lee and J.G. Duh: J. Mater. Sci., 1999, vol. 33, pp. 5569–72.10.1023/A:1004499728840 ↗
14. Y.G. Lee and J.G. Duh: J. Mater. Sci.: Mater. Electronic, 1999, vol. 10, pp. 33–43.10.1023/A:1008975006706 ↗
15. A.S. Zuruzi, C.H. Chiu, S.K. Lahiri, and K.N. Tu: J. Appl. Phys., 1999, vol. 86, pp. 4916–21.10.1063/1.371460 ↗
16. J.H. Lau: Flip Chip Technologies, McGraw-Hill Book Co., New York, NY, 1997, pp. 427–35.
17. D. Olsen, R. Wright, and H. Berg: Proc. 13th Am. Reliability Physics Symp., Vicks Lithograph Co., Las Vegas, NV, 1975, pp. 80–86.
18. G.A. Di Bari: ASM Handbook, vol. 5, Surface Engineering, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 201–12.
19. D.W. Baudrand: ASM Handbook, vol. 5, Surface Engineering, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 290–310.
20. S.S. Tulsi: Trans. Inst. Met. Finishing, 1983, vol. 61, pp. 142–49.
21. M. Ratzker, D.S. Lashmore, and K.W. Pratt: Plating Surfacing Finishing, 1986, vol. 73, pp. 74–82.
22. G. Schenzel and H. Kreye: Plating Surfacing Finishing, 1990, vol. 77, pp. 50–54.
23. D.W. Baudrand: Electronics, 1983, vol. 29, pp. 20–22.
24. M. Inaba, K. Yamakawa, and N. Iwase: IEEE Trans. Comp. Hybrids, Manuf. Technol., 1990, vol. CHMT-13, pp. 119–23.10.1109/33.52858 ↗
25. S.K. Kang and V. Ramachandran: Scripta Metall., 1980, vol. 14, pp. 421–24.10.1016/0036-9748(80)90338-5 ↗
26. C.Y. Lee and K.L. Lin: Thin Solid Film, 1994, vol. 249, pp. 201–06.10.1016/0040-6090(94)90761-7 ↗
27. W.J. Tomlinson and H.G. Rhodes: J. Mater. Sci., 1987 vol. 22, pp. 1769–72.10.1007/BF01132405 ↗
28. K.L. Lin and C.J. Chen: J. Mater. Sci.: Mater. Electronic, 1999, vol. 7, pp. 397–401.
29. K.L. Lin and J.T. Chang: Scripta Metall., 1994, vol. 30, pp. 559–64.10.1016/0956-716X(94)90429-4 ↗
30. C.Y. Lee and K.L. Lin: Thin Solid Film, 1993, vol. 229, pp. 63–75.10.1016/0040-6090(93)90411-H ↗
31. J.W. Jang, P.G. Kim, K.N. Tu, D.R. Frear, and P. Thompson: J. Appl. Phys., 1999, vol. 85, pp. 8456–63.10.1063/1.370627 ↗
32. R.N. Duncan: Proc. EN ’93 Conf., Gardner Publications, Orlando, FL, 1993, pp. 2–17.
33. J.I. Goldstein, D.E. Mewbury, P. Echlin, D.C. Joy, C. Fiori, and E. Lifshin: Scanning Electron Microscopy and X-ray Microanalysis, Plenum Press, New York, NY, 1981, p. 352.10.1007/978-1-4613-3273-2 ↗
34. Pi Lin Liu and Jian Ku Shang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2867–75.10.1007/BF02830352 ↗
35. S.V.S. Tyagi, V.K. Tandon, and S. Ray: Z. Metallkd., 1985, vol. 76, pp. 492–95.
36. J.A. van Beek, S.A. Stolk, and J.J. van Loo: Z. Metallkd. 1982, vol. 73, pp. 439–44.
37. P.L. Liu and J.K. Shang: University of Illinois at Urbana-Champaign, Urbana, IL, unpublished research, 1999.