Low-temperature superplastic behavior of a submicrometer-grained 5083 Al alloy fabricated by severe plastic deformation
Source abstract
Abstract
A submicrometer-grained structure was introduced in a commercial 5083 Al alloy by imposing an effective strain of ∼8 through equal channel angular pressing. In order to examine the low-temperature superplastic behavior, the as-equal channel angular pressed (as-ECAP) samples were tensile tested in the strain rate range of 10−5 to 10−2 s−1 at temperatures of 498 to 548 K corresponding to 0.58 to 0.65 Tm, where Tm is the incipient melting point. The mechanical data of the alloy at 498 and 548 K exhibited a sigmoidal behavior in a double logarithmic plot of the maximum true stress vs true strain rate. The strain rate sensitivity was 0.1 to 0.2 in the low- and high-strain rate regions and 0.4 in the intermediate-strain rate region, indicating the potential for superplasticity. At 523 K, instead of the sigmoidal behavior, a strain rate sensitivity of 0.4 was maintained to low strain rates. A maximum elongation of 315 pct was obtained at 548 K and 5×10−4 s−1. The activation energy for deformation in the intermediate-strain rate region was estimated as 63 kJ/mol. Low-temperature superplasticity of the ultrafine grained 5083 Al alloy was attributed to grain boundary sliding that is rate-controlled by grain boundary diffusion, with a low activation energy associated with nonequilibrium grain boundaries. Cavity stringers parallel to the tensile axis were developed during deformation, and the failure occurred in a quasi-brittle manner with moderately diffusive necking.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Towards Innovations in Superplasticity II, JIMIS 9, Kobe, Japan, T. Sakuma, T. Aizawa, and K. Higashi, eds., Trans Tech Pub., Aedermannsdorf, Switzerland, 1999.
2. R.L. Hecht and K. Kannan: in Superplasticity and Superplastic Forming, A.K. Gosh and T.R. Bieler, eds., TMS, Warrendale, PA, 1995, pp. 259–64.
3. V.M. Segal, V.I. Reznikov, A.D. Drobyshevsky, and V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105.
4. V.M. Segal: Mater. Sci. Eng., 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
5. R.Z. Valiev, D.A. Salimonenko, N.K. Tsenev, P.B. Berbon, and T.G. Langdon: Scripta Mater., 1997, vol. 37, pp. 1945–50.10.1016/S1359-6462(97)00387-4 ↗
6. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
7. K. Neishi, T. Uchida, A. Yamauchi, K. Nakamura, Z. Horita, and T.G. Langdon: Mater: Sci. Eng., 2001, vol. A307, pp. 23–28.
8. S.Y. Chang, J.G. Lee, K.-T. Park, and D.H. Shin: Mater. Trans. (JIM), 2001, vol. 42, pp. 1074–80.10.2320/matertrans.42.1074 ↗
9. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
10. M. Nemoto, Z. Horita, M. Furukawa, and T.G. Langdon: Metall. Mater., 1998, vol. 4, pp. 1181–90.
11. S. Komura, M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 2001, vol. A297, pp. 111–18.10.1016/S0921-5093(00)01255-7 ↗
12. D.H. Shin, B.C. Kim, Y.-S. Kim, and K.-T. Park: Acta Mater., 2000, vol. 48, pp. 2247–55.10.1016/S1359-6454(00)00028-8 ↗
13. J. Pilling and N. Ridley: Superplasticity in Crystalline Solids, The Institute of Metals, London, 1989, p. 28
14. S. Komura, Z. Horita, M. Nemoto, and T.G. Langdon: J. Mater. Res., 1999, vol. 14, pp. 4044–51.10.1557/JMR.1999.0546 ↗
15. Y.M. Yang, E. Ma, and M.W. Chen: Appl. Phys. Lett., 2002, vol. 80 (13), pp. 2395–97.10.1063/1.1465528 ↗
16. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
17. M. Kawazoe, T. Shibata, T. Mukai, and K. Higashi: Scripta Mater., 1997, vol. 36, pp. 699–705.10.1016/S1359-6462(96)00446-0 ↗
18. I.C. Hisao and J.C. Huang: Scripta Mater., 1999, vol. 40, pp. 697–703.10.1016/S1359-6462(98)00460-6 ↗
19. F.A. Mohamed and T.G. Langdon: Phys. Status Solidi, 1976, vol. 33, pp. 375–81.10.1002/pssa.2210330140 ↗
20. J.E. Bird, A.K. Mukherjee, and J.E. Dorn: in Quantitative Relation between Properties and Microstructures, D.G. Brandon and A. Rosen, eds., Israel University Press, Jerusalem, 1969, p. 255
21. K.-T. Park, J.C. Earthman, and F.A. Mohamed: Phil. Mag. Lett., 1994, vol. 70, pp. 7–13.10.1080/09500839408243865 ↗
22. D.H. Shin and K.-T. Park: Mater. Sci. Eng., 1999, vol. A268, pp. 55–62.10.1016/S0921-5093(99)00116-1 ↗
23. O.D. Sherby, R.H. Klundt, and A.K. Miller: Metall. Trans. A, 1977, vol. 8A, pp. 843–52.10.1007/BF02661565 ↗
24. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1967, vol. 13, pp. 325–90.
25. S.J. Rothman, N.J. Peterson, L.J. Lowicki, and L.C. Robinson: Phys. Status Solidi, 1974, vol. B63, p. 29.10.1002/pssb.2220630151 ↗
26. T.R. McNelly, E.W. Lee, and M.E. Mills: Metall. Trans. A, 1986, vol. 17A, pp. 1035–41.10.1007/BF02661269 ↗
27. S.S. Woo, Y.R. Kim, D.H. Shin, and W.J. Kim: Scripta Mater., 1997, vol. 37, pp. 1351–58.10.1016/S1359-6462(97)00275-3 ↗
28. E.M. Taleff, G.A. Hanshall, T.G. Nieh, D.R. Lesuer, and J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081–91.10.1007/s11661-998-0300-1 ↗
29. Y.R. Kolobov, G.P. Grabovetskaya, M.B. Ivanov, A.P. Zhilyaev, and R.Z. Valiev: Scripta Mater., 2001, vol. 44, pp. 873–78.10.1016/S1359-6462(00)00699-0 ↗
30. F.A. Mohamed and T.G. Langdon: Phil. Mag., 1975, vol. 32, pp. 697–709.10.1080/14786437508221614 ↗
31. P.K. Chaudhury and F.A. Mohamed: Acta Metall., 1988, vol. 36, pp. 1099–1110.10.1016/0001-6160(88)90163-0 ↗
32. G. Rai and N.J. Grant: Metall. Trans. A, 1975, vol. 6A, pp. 385–90.10.1007/BF02667294 ↗
33. Z. Horita, T. Fujinami, M. Nemoto, and T.G. Langdon: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 691–701.10.1007/s11661-000-0011-8 ↗
34. H. Iwasaki, S. Hayami, K. Higashi, and S. Tanimura: in Superplasticity in Metals, Ceramics and Intermetallics, Proc. MRS, M. Mayo, M. Kobayashi, and J. Wadsworth, eds., Pittsburgh, PA, 1990, pp. 233–38.
35. G. Petzow: Metallographic Etching, ASM, Metals Park, OH, 1978, p. 39.
36. R. Verma, A.K. Gosh, S. Kim, and C. Kim: Mater. Sci. Eng., 1995, vol. A191, pp. 143–50.10.1016/0921-5093(94)09644-9 ↗
37. Y. Wu, L.D. Castillo, and E.J. Lavernia: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1059–68.10.1007/s11661-997-0235-y ↗
38. Y. Iwashashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗