Microstructure and texture evolution under strain-path changes in low-carbon interstitial-free steel
Source abstract
Abstract
The transmission electron microscopy (TEM) microstructure of a low-carbon Ti-killed interstitial-free (IF) steel has been examined after simple-shear/simple-shear and uniaxial-tension/simple-shear strain-path changes, in connection with the crystallographic orientation of the grains. The results are discussed in the context of the inter-relation between the microstructure and texture evolutions and their joint influence on the mechanical behavior. A partial disappearance of prestrain microstructures is shown to cause the stagnation of work hardening at earlier stages of reversed loading during Bauschinger simple-shear sequences. Under progressing reversed deformation, a fragmentation of the grains of unstable orientations still slows down the work-hardening rate. A strong localization of plastic flow within microbands following an orthogonal strain-path change is shown to occur within the grains containing well-developed prestrain dislocation boundaries and belonging to certain orientation groups.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. E.F. Rauch and J.-H. Schmitt: Mater. Sci. Eng. A, 1989, vol. 113, pp. 441–48.10.1016/0921-5093(89)90331-6 ↗
2. Z. Hu, E.F. Rauch, and C. Teodosiu: Int. J. Plasticity, 1992, vol. 8, pp. 839–56.10.1016/0749-6419(92)90006-X ↗
3. E.F. Rauch and S. Thuiller: Mater. Sci. Eng., 1993, vol. A164, pp. 255–59.10.1016/0921-5093(93)90673-3 ↗
4. S. Thuiller and E.F. Rauch: Acta Metall. Mater., 1994, vol. 42, pp. 1973–83.10.1016/0956-7151(94)90022-1 ↗
5. S. Thuiller and E.F. Rauch: Scripta Metall. Mater., 1995, vol. 32, pp. 541–46.10.1016/0956-716X(95)90834-7 ↗
6. X. Huang and N. Hansen: Scripta Mater., 1997, vol. 37, pp. 1–7.10.1016/S1359-6462(97)00072-9 ↗
7. X. Huang: Scripta Mater., 1998, vol. 38, pp. 1697–703.10.1016/S1359-6462(98)00051-7 ↗
8. B. Bacroix, P. Genevois, and C. Teodosiu: Eur. J. Mech., A/Solids, 1994, vol. 13, pp. 661–75.
9. B. Bacroix and Z. Hu: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 601–13.10.1007/BF02663909 ↗
10. P. Genevois, C. Teodosiu, and F. Moussy: Proc. 16th Biennial Congr. IDDRG, Börlange, Suède, 1990, pp. 53–61.
11. S. Hiwatashi, A. Van Bael, P. Van Houtte, and C. Teodosiu: Int. J. Plasticity, 1998, vol. 14, pp. 647–69.10.1016/S0749-6419(98)00031-X ↗
12. P. Gilormini, L.S. Toth, and J.J. Jonas: Proc. R. Soc. London A, 1990, vol. 40, pp. 489–507.
13. V.V. Rybin, A.S. Rubzov, and E.V. Nesterova: Zavodskaja Laboratoria, 1982, vol. 5, pp. 21–26 (in Russian).
14. V.V. Rybin: Large Plastic Strains and Fracture of Metals, Metallurgia, Moscow, 1986, pp. 1–224 (in Russian).