Creep deformation mechanisms in high-pressure die-cast magnesium-aluminum-base alloys
Source abstract
Abstract
Creep of die-cast Mg alloys is described as an integral part of their plastic deformation behavior in terms of stress-strain-rate-strain relations. Creep tests yield information on yield stress, work hardening, maximum deformation resistance (minimum creep rate), and work softening. Testing in compression avoids influences by fracture. Data on the alloy AJ52 (5Al, 2Sr) in the temperature range between 135 °C and 190 °C are presented and compared to those for AZ91 and AS21. Die-cast Mg-Al alloys consist of fine grains with a grain boundary region containing intermetallic precipitates. Transmission electron microscopic observations indicate that basal glide is the dominant mechanism of deformation being supplemented by nonbasal glide and twinning to maintain compatiblity between the grains. The deformation resistance can be modeled with a composite approach assuming that the grain boundary region is relatively hard due to precipitation of intermetallic phases. The differences in long-term creep resistance at low stress are explained in terms of different strength and stability of precipitates in the different alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. W. Blum, B. Watzinger, and P. Weidinger: in Magnesium Alloys and Their Applications, B.L. Mordike and K.U. Kainer, eds., MATINFO Werkstoff-Informationsgesellschaft, Frankfurt, 1998, pp. 49–60.
2. W. Blum, Y. Li, X.H. Zeng, B. von Großmann, C. Haberling, and H.-G. Haldenwanger: in Int. Conf. on Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley-VCH, Weinheim, 2004, pp. 62–67.
3. D.A. Woodford: Mater. Sci. Eng., 1969, vol. 4, pp. 146–54.10.1016/0025-5416(69)90054-8 ↗
4. Technical Report, Noranda, Canada, 2003, http://www.noranda.com
5. P. Zhang: Dr.-Ing. Dissertation, Universitat Erlangen-Nurnberg, Erlangen, 2001.
6. P. Zhang, B. Watzinger, and W. Blum: Phys. Status Solidi (a), 1999, vol. 175, pp. 481–89.10.1002/(SICI)1521-396X(199910)175:2<481::AID-PSSA481>3.0.CO;2-J ↗
7. P. Zhang, B. Watzinger, Q.P. Kong, and W. Blum: Key Eng. Mater., 2000, vol. 171–174, pp. 609–16.
8. W. Blum, B. Watzinger, and P. Zhang: Adv. Eng. Mater., 2000, vol. 2, pp. 349–55.10.1002/1527-2648(200006)2:6<349::AID-ADEM349>3.0.CO;2-G ↗
9. W. Blum, P. Weidinger, B. Watzinger, R. Sedláček, R. Rösch, and H.-G. Haldenwanger: Z. Metallkd., 1997, vol. 88, pp. 636–41.
10. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps—The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982, p. 44.
11. A. Luo: in 3rd Int. Magnesium Conf., G.W. Lorimer, ed., Institute of Materials, London, 1997, pp. 449–64.
12. S.R. Agnew, C.N. Tomé, D.W. Brown, T.M. Holden, and S.C. Vogel: Scripta Mater., 2003, vol. 48, pp. 1003–08.10.1016/S1359-6462(02)00591-2 ↗
13. G.V. Raynor: The Physical Metallurgy of Mg and Its Alloys, Pergamon Press, Oxford, United Kingdom, 1959.
14. H. Sato, Y. Masada, and H. Oikawa: Proc. 7th JIM Int. Symp. on Aspects of High Temperature Deformation and Fracture in Crystalline Materials, Y. Hosoi, H. Yoshinaga, H. Oikawa, and K. Maruyama, eds., The Japan Institute of Metals, Sendai, 1993, pp. 107–14.
15. H. Sato, M. Suzuki, K. Maruyama, and H. Oikawa: Key Eng. Mater., 2000, vols. 171–174, pp. 601–09.10.4028/www.scientific.net/KEM.171-174.601 ↗
16. W. Blum: in Plastic Deformation and Fracture of Materials, vol. 6, Materials Science and Technology, H. Mughrobi, ed., R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH Verlagsgesellschaft, Weinheim, 1993, pp. 359–405.
17. G.L. Dunlop, W.P. Sequeira and M.S. Dargusch: Proc. 1st Isreali Int. Conf. on Magnesium Science and Technology, Magnesium Research Institute (MRI) Ltd., Beer-Sheva, Israel, 1997, pp. 108–15.
18. M. Regev, E. Aghion, A. Rosen, and M Bamberger: Mater. Sci. Eng. A, 1998, vol. 252, pp. 6–16.10.1016/S0921-5093(98)00668-6 ↗
19. W. Blum, F. Breutinger, B. Watzinger, J. Kroc, P. Weidinger, and R. Rösch: in Proc. 1st Israeli Int. Conf. on Magnesium Science & Technology, E. Aghion and D. Eliezer, eds., Magnesium Research Institute (MRI) Ltd., Israel, 1998, pp. 151–56.
20. B.J. Watzinger: Dr.-Ing. Dissertation, University of Erlangen-Nurnberg, Erlangen, 2000.
21. H. Mughrabi: Acta Metall., 1983, vol. 31 (9), pp. 1367–79.10.1016/0001-6160(83)90007-X ↗
22. S. Vogler and W. Blum: in Creep and Fracture of Engineering Materials and Structures, B. Wilshire and R.W. Evans, eds., Institute of Metals, London, 1990, pp. 65–79.
23. R. Sedláček and W. Blum: Comp. Mater. Sci., 2002, vol. 25 (1–2), pp. 200–06.10.1016/S0927-0256(02)00264-1 ↗
24. M. Vogel, O. Kraft, and E. Arzt: Scripta Mater., 2003, vol. 48, pp. 985–90.10.1016/S1359-6462(02)00588-2 ↗
25. I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, and T.M. Pollock: Scripta Mater., 2003, vol. 48, pp. 1029–34.10.1016/S1359-6462(02)00595-X ↗
26. J.F. Nie and B.C. Muddle: Acta Mater., 2000, vol. 48, pp. 1691–1703.10.1016/S1359-6454(00)00013-6 ↗
27. Hydro Magnesium Porsgrunn, Analysezertifikat, 1995.
28. J.L. Murray: in Binary Alloy Phase Diagrams, T.B. Massalski, ed., ASM INTERNATIONAL, Metals Park, OH, 1986, vol. 1, p. 129.