Grain growth of nanocrystalline Ni powders prepared by cryomilling
Source abstract
Abstract
Grain growth of nanocrystalline Ni powders with an average grain size of ∼22 nm prepared by cryogenic mechanical milling (or cryomilling) was investigated by using X-ray diffraction (XRD) and transmission electron microscopy (TEM). A dispersion of NiO and Ni3N particles with a size less than 5 nm was formed in the cryomilled powders. The Ni3N particles decomposed at 773 K. It was found that at 0.56 homologous temperature (T/TM), Ni grains were retained at ∼150 nm even after long annealing times (e.g., 4 hours). For 0.45 to 0.62 T/TM, the time exponent n deduced from D1/n−D01/n=kt was 0.16 to 0.32, tending toward 0.5 as T/TM increased. The activation energy for grain growth in the Ni sample was determined to be 113 kJ/mol, which is close to the activation energy for grain boundary self-diffusion in polycrystalline Ni. The observed high grain size stability was attributed primarily to a grain boundary pinning mechanism arising from the NiO particles as well as impurity segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. H. Gleiter: Acta Mater., 2000, vol. 48, pp. 1–29.10.1016/S1359-6454(99)00285-2 ↗
2. J. Verhoeven: Fundamentals of Physical Metallurgy, John Wiley & Sons, New York, NY, 1975, p. 204.
3. J. Eckert, J.C. Holzer, and W.L. Johnson: J. Appl. Phys., 1993, vol. 73, pp. 131–41.10.1063/1.353890 ↗
4. R.J. Perez, H.G. Jiang, C.P. Dogan, and E.J. Lavernia: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2469–75.10.1007/s11661-998-0218-7 ↗
5. K. Boylan, D. Ostrander, U. Erb, G. Palumbo, and K.T. Aust: Scripta Metall. Mater., 1991, vol. 25, pp. 2711–16.10.1016/0956-716X(91)90144-P ↗
6. D.G. Morris and M.A. Morris: Acta Metall. Mater., 1991, vol. 39, pp. 1763–70.10.1016/0956-7151(91)90144-P ↗
7. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
8. P. Knauth, A. Charai, and P. Gas: Scripta Metall. Mater., 1993, vol. 28, pp. 325–30.10.1016/0956-716X(93)90436-V ↗
9. H.J. Höfler and R.S. Averback: Scripta Metall. Mater., 1990, vol. 24, pp. 2401–06.10.1016/0956-716X(90)90101-L ↗
10. C. Bansal, Z. Gao, and B. Fultz: Nanostr. Mater., 1995, vol. 5, pp. 327–36.10.1016/0965-9773(95)00236-8 ↗
11. B. Huang, R.J. Perez, and E.J. Lavernia: Mater. Sci. Eng. A, 1998, vol. A255, pp. 124–32.10.1016/S0921-5093(98)00765-5 ↗
12. K.H. Chung, J. Lee, R. Rodriguez, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, in press.
13. F. Zhou, J. Lee, and E.J. Lavernia: Scripta Mater., 2001, vol. 44, pp. 2013–17.10.1016/S1359-6462(01)00826-0 ↗
14. M.J. Luton, C.S. Jayanth, M.M. Disco, S. Matras, and J. Vallone: in Multicomponent Ultrafine Microstructures, L.E. McCandlish, B.H. Kear, D.E. Polk, and R.W. Siegel, eds. Materials Research Society, Pittsburgh, PA, 1989, pp. 79–86.
15. M. Kambara, K. Uenishi, and K.F. Kobayashi: J. Mater. Sci., 2000, vol. 35, pp. 2897–2905.10.1023/A:1004771808047 ↗
16. C. Suryanarayana and M. Norton: X-ray Diffraction: A Practical Approach, Plenum Press, New York, NY, 1998, p. 207.10.1007/978-1-4899-0148-4_9 ↗
17. J. Eckert, J.C. Holzer, C.E. Krill III, and W.L. Johnson: J. Mater. Res., 1992, vol. 7, pp. 1751–61.10.1557/JMR.1992.1751 ↗
18. H. Fecht, E. Hellstern, Z. Fu, and W.L. Johnson: Metall. Trans. A, 1990, vol. 21A, pp. 2333–37.10.1007/BF02646980 ↗
19. C.C. Koch: Nanostr. Mater., 1997, vol. 9, pp. 13–22.10.1016/S0965-9773(97)00014-7 ↗
20. F. Zhou, K.H. Chung, and E.J. Lavernia: in Powder Metallurgy and Particulate Materials for Industrial Applications, A. Alman and J. Newkirk, eds., TMS, Warrendale, PA, 2000, pp. 167–77.
21. P.S. Gilman and J.S. Benjamin: Ann. Rev. Mater. Sci., 1983, vol. 13, pp. 279–300.10.1146/annurev.ms.13.080183.001431 ↗
22. M.L. Lau, H.G. Jiang, W. Nuchter, and E.J. Lavernia: Phys. Status Solidi (A), 1998, vol. 166, pp. 257–68.10.1002/(SICI)1521-396X(199803)166:1<257::AID-PSSA257>3.0.CO;2-J ↗
23. B. Huang, J. Vallone, and M.J. Luton: Nanostr. Mater., 1995, vol. 5, pp. 631–42.10.1016/0965-9773(95)00280-R ↗
24. C. Smithells: Metals Reference Book, 5th ed., Butterworth and Co., London, 1976, p. 205.
25. K.Y. Wang, T.D. Shen, H.G. Jiang, M.X. Quan, and W.D. Wei: Mater. Sci. Eng. A, 1994, vol. 179, pp. 215–19.10.1016/0921-5093(94)90196-1 ↗
26. W. McClune: Powder Diffraction File Alphabetical Index, Inorganic Phases, JCPDS International Center for Diffraction Data, Swarthmore, PA, 1988.
27. T.B. Massalski: Binary Alloy Phase Diagrams, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1990.
28. U. Klement, U. Erb, A.M. El-Sherik, and K.T. Aust: Mater. Sci. Eng. A, 1995, vol. 203, pp. 177–86.10.1016/0921-5093(95)09864-X ↗
29. R. Juza and W. Sachsze: Z. Anorg. Chem., 1943, vol. 251, p. 201.10.1002/zaac.19432510205 ↗
30. L. Maya, T. Thundat, J.R. Thompson, and R.J. Stevenson: Appl. Phys. Lett., 1995, vol. 67, pp. 3034–36.10.1063/1.115445 ↗
31. C.S. Smith: Trans. AIME, 1948, vol. 175, pp. 15–51.
32. Ö.N. Dogan, G.M. Michael, and H.W. Kwon: Metall. Trans. A, 1992, vol. 23, pp. 2121–29.10.1007/BF02646005 ↗
33. P.A. Beck, J.C. Kremer, L.J. Demer, and M.L. Holzworth: Trans. AIME, 1948, vol. 175, pp. 372–94.
34. J.E. Burke: Trans. AIME, 1949, vol. 180, pp. 73–91.
35. R.A. Vandermeer and H. Hu: Acta Metall. Mater., 1994, vol. 42, pp. 3071–75.10.1016/0956-7151(94)90404-9 ↗
36. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Elmsford, NY, 1982, p. 21.
37. W. Dickenscheid, R. Birringer, H. Gleiter, O. Kanert, B. Michel, and B. Günther: Solid State Commun., 1991, vol. 79, pp. 683–86.10.1016/0038-1098(91)90613-Z ↗