journal article·2000-03Open access

Growth of a Au-Ni-Sn intermetallic compound on the solder-substrate interface after aging

A. M. Minor, J. W. Morris

Abstract

Ni/Au metallization layers are used with increasing frequency to protect Cu substrates in ball grid array microelectronic packaging. The external Au layer provides oxidation and corrosion resistance during storage prior to assembly, while the intermediate Ni layer acts as a diffusion barrier that inhibits the formation of a thick Cu-Sn intermetallic layer during aging. During soldering with eutectic Pb-Sn, the Au dissolves into the molten solder and forms fine, needle-shaped AuSn{sub 4} intermetallic precipitates that are retained in a dense distribution in the bulk of the solder joint after it has solidified. However, recent research by Mei et al. has revealed a new and potentially problematic phenomenon that seems to be peculiar to the Ni/au metallization. They found that after extensive aging (150 C for 2 weeks in their case), the Au-Sn intermetallic redeposited onto the solder-substrate interface. The reconstituted interface was significantly weakened and failed by brittle fracture along the surface between the redeposited Au-Sn and the Ni{sub 3}Sn{sub 4} layer that formed during reflow. While the interfacial redeposition of Au-Sn intermetallics has been observed previously, the mechanism remains unknown. The present work was undertaken to identify the mechanism of this phenomenon and explore methods for controlling it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. J. Glazer, P. Kramer, and J.W. Morris, Jr.: Proc. Surface Mount Intl. Conf., 1991, vol. 1.2, pp. 629–39.
2. Z. Mei, A. Eslambolchi, and P. Johnson: Proc. 48th Electronic Components and Technology Conf., IEEE, Piscataway, NJ, 1998, pp. 952–61.
3. K. Banerji and R. Darveaux: Proc. 1st Int. Conf. on Microstructure and Mechanical Properties of Aging Materials, TMS-AIME, Chicago, IL, 1992, pp. 431–42.
4. A. Neumann, Kjekshus, and E. Røst: J. Solid State Chem. 1996, vol. 123, pp. 203–07.10.1006/jssc.1996.0169 ↗
5. S. Anhock, H. Oppermann, C. Kallmayer, R. Aschenbrenner, L. Thomas, and H. Reichl: Proc. IEEE/CPMT Berlin Intl. Electronics Manufacturing Technology. Symp., 1998, pp. 156–65.
6. A. Prince: J. Less-Common Met., 1967, vol. 12, pp. 107–16.10.1016/0022-5088(67)90094-X ↗
7. H. D. Blair, T. Pan, and J.M. Nicholson: Proc. 48th Electronic Components and Technology Conf., IEEE, Piscataway, NJ, 1998, pp. 259–67.