journal article·2025-02

A Novel Precipitation-Hardened Medium-Entropy Alloy with Excellent Tensile Properties

Sujatha Desetti, M. Nagini, D. Arvindha Babu, Yasam Palguna, Korla Rajesh, B. S. Murty

Publisher page

Abstract

In this work, we report a newly developed gamma-gamma '-strengthened Ni-Co-Cr-Al-Ti-based medium-entropy alloy (MEA) with a low density of 7.84 g cm(-3), designed based on the CALPHAD approach for turbine disk applications. The alloy exhibits coarsened gamma ' precipitates with an average diameter of 285 +/- 70 nm and irregular eutectic (gamma + gamma ') phases in the interdendritic region in the as-cast condition. In contrast, fine gamma ' precipitates with an average diameter of 154 +/- 26 nm are uniformly distributed in the dendritic region. The alloy demonstrates outstanding tensile properties, including a yield strength of 833 +/- 4 MPa, ultimate tensile strength of 1080 +/- 14 MPa, and ductility of 22 +/- 2 pct in the as-cast condition. Due to its low density and high specific yield strength (106 MPa g(-1) cm(-3)), this alloy has the potential to be a viable alternative to Waspaloy and other nickel-based superalloys. [GRAPHICS] .
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. R.C. Reed: The superalloys: fundamentals and applications, Cambridge University Press, 2006.10.1017/CBO9780511541285 ↗
2. S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C.O. Brien, and A. Suzuki, eds.: Superalloys, Springer, Cham, 2020.
3. G. Aggen, F.W. Akstens, C. Michael, A. Adjelian, A. Rubeli, L.H.S. Avery Consultant, P. Babu, A.M. Bayer, T. Vasco, F. Bello, S.P. Bhat, M. Blair, B. Boardman, K.W. Boehm, N. Steel, F.W. Boulger, G.K. Bouse, J.L. Bowles, J.D. Boyd, B.L. Bramfitt, R.W. Bratt, and W.D. Brentnall: Properties and selection: irons, steels, and high-performance alloys section: ASM Handbook, vol. 1, 2005.
4. S. Gorsse, M.H. Nguyen, O.N. Senkov, and D.B. Miracle: Database on the mechanical properties of high entropy alloys and complex concentrated alloys. Data Brief, 2018, vol. 21, pp. 2664–78.10.1016/j.dib.2018.11.111 ↗
5. T. Tsao, Y. Chang, K. Chang, J. Yeh, M. Chiou, S. Jian, C. Kuo, W. Wang, and H. Murakami: Int. J. Metall. Mater. Eng., 2015, vol. 1, p. 107.
6. J.Y. He, H. Wang, H.L. Huang, X.D. Xu, M.W. Chen, Y. Wu, X.J. Liu, T.G. Nieh, K. An, and Z.P. Lu: Acta Mater., 2016, vol. 102, pp. 187–96.10.1016/j.actamat.2015.08.076 ↗
7. W. Lu, X. Luo, B. Huang, P. Li, and Y. Yang: Scr. Mater., 2022, vol. 212, p. 114576.10.1016/j.scriptamat.2022.114576 ↗
8. D.D. Zhang, J. Kuang, H. Xue, J.Y. Zhang, G. Liu, and J. Sun: J. Mater. Sci. Technol., 2023, vol. 132, pp. 201–12.10.1016/j.jmst.2022.06.012 ↗
9. H. Peng, L. Hu, S. Huang, Y. Zhang, Y. Yi, L. Li, and I. Baker: Mater Charact, 2023, vol. 2023, p. 113156.10.1016/j.matchar.2023.113156 ↗
10. L. Zhang, X. Huo, X. Jin, and B. Li: Mater. Sci. Technol., 2020, vol. 36, pp. 477–83.10.1080/02670836.2019.1710927 ↗
11. L. Zhang, Y. Zhou, X. Jin, X. Du, and B. Li: Mater. Sci. Eng. A, 2018, vol. 732, pp. 186–91.10.1016/j.msea.2018.06.102 ↗
12. J.X. Hou, S.F. Liu, B.X. Cao, J.H. Luan, Y.L. Zhao, Z. Chen, Q. Zhang, X.J. Liu, C.T. Liu, J.J. Kai, and T. Yang: Acta Mater., 2022, vol. 238, p. 118216.10.1016/j.actamat.2022.118216 ↗
13. Y.J. Chang and A.C. Yeh: Mater. Chem. Phys., 2018, vol. 210, pp. 111–19.10.1016/j.matchemphys.2017.09.057 ↗
14. L. Zhang, Y. Zhou, X. Jin, X. Du, and B. Li: Scr. Mater., 2018, vol. 146, pp. 226–30.10.1016/j.scriptamat.2017.12.001 ↗
15. H.M. Daoud, A.M. Manzoni, N. Wanderka, and U. Glatzel: JOM, 2015, vol. 67, pp. 2271–77.10.1007/s11837-015-1484-7 ↗
16. C.M. Kuo and C.W. Tsai: Mater. Chem. Phys., 2018, vol. 210, pp. 103–10.10.1016/j.matchemphys.2017.10.064 ↗
17. J.Y.C. Fang, W.H. Liu, J.H. Luan, and Z.B. Jiao: J. Phase Equilib. Diff., 2021, vol. 42, pp. 781–93.10.1007/s11669-021-00919-4 ↗
18. Y.L. Zhao, T. Yang, Y. Tong, J. Wang, J.H. Luan, Z.B. Jiao, D. Chen, Y. Yang, A. Hu, C.T. Liu, and J.J. Kai: Acta Mater., 2017, vol. 138, pp. 72–82.10.1016/j.actamat.2017.07.029 ↗
19. H. Peng, I. Baker, L. Hu, and L. Li: Scr. Mater., 2022, vol. 207, p. 114278.10.1016/j.scriptamat.2021.114278 ↗
20. N. An, Y. Sun, Y. Wu, J. Tian, Z. Li, Q. Li, J. Chen, and X. Hui: Mater. Sci. Eng. A, 2020, vol. 798, p. 140213.10.1016/j.msea.2020.140213 ↗
21. Y. Zhao, T. Yang, B. Han, J. Luan, D. Chen, W. Kai, C.T. Liu, and J. Jung Kai: Mater. Res. Lett., 2019, vol. 7, pp. 152–58.10.1080/21663831.2019.1568315 ↗
22. C. Li, G. Guo, Z. Yuan, W. Xuan, X. Li, Y. Zhong, and Z. Ren: J. Alloys Compd., 2017, vol. 720, pp. 272–76.10.1016/j.jallcom.2017.05.253 ↗
23. A. Szczotok and B. Chmiela: J. Mater. Eng. Perform., 2014, vol. 23, pp. 2739–47.10.1007/s11665-013-0843-1 ↗
24. Z. Zhang, Q. Ding, Y. Gong, X. Wei, Z. Zhang, and H. Bei: J. Mater. Res. Technol., 2023, vol. 26, pp. 7789–802.10.1016/j.jmrt.2023.09.154 ↗
25. Standard test method for density of powder metallurgy (pm) materials containing less than two percent porosity 1, ASTM International, Designation: B311–17, 2017.
26. S.M. Shaikh, V.S. Hariharan, S.K. Yadav, and B.S. Murty: Intermetallics, 2020, vol. 127, p. 106926.10.1016/j.intermet.2020.106926 ↗
27. Z. Zhu, M. Wang, T. He, T. Li, Y. Di, H. Yan, Y. Zhang, and Y. Lu: Adv. Eng. Mater., 2023, vol. 25, p. 2300689.10.1002/adem.202300689 ↗
28. B. Tripathy, S.R.K. Malladi, and P.P. Bhattacharjee: Mater. Sci. Eng. A, 2022, vol. 831, p. 142190.10.1016/j.msea.2021.142190 ↗
29. A. Ayrenk and I. Kalay: Phil. Mag., 2022, vol. 106, pp. 1961–73.10.1080/14786435.2022.2092228 ↗
30. G. Qin, R. Chen, P.K. Liaw, Y. Gao, L. Wang, Y. Su, H. Ding, J. Guo, and X. Li: Nanoscale, 2020, vol. 12, pp. 3965–76.10.1039/C9NR08338C ↗
31. J. Wang, J. Zou, H. Yang, X. Dong, P. Cao, X. Liao, Z. Liu, and S. Ji: J. Mater. Sci. Technol., 2023, vol. 135, pp. 241–49.10.1016/j.jmst.2022.06.048 ↗
32. A.V. Kuznetsov, D.G. Shaysultanov, N.D. Stepanov, G.A. Salishchev, and O.N. Senkov: Mater. Sci. Eng. A, 2012, vol. 533, pp. 107–18.10.1016/j.msea.2011.11.045 ↗
33. L. Wang, C. Yao, J. Shen, Y. Zhang, T. Wang, Y. Ge, L. Gao, and G. Zhang: Intermetallics, 2020, vol. 118, p. 106681.10.1016/j.intermet.2019.106681 ↗
34. S.K. Guo, Z.L. Ma, G.H. Xia, X.Y. Li, Z.Q. Xu, W.Z. Li, X.Y. Jin, and X.W. Cheng: Acta Mater., 2024, vol. 263, p. 119492.10.1016/j.actamat.2023.119492 ↗
35. X.H. Du, Y.H. Gai, W.P. Li, T.H. Chou, J.C. Huang, C.X. Shi, G.S. Duan, and B.L. Wu: Intermetallics, 2022, vol. 146, p. 107582.10.1016/j.intermet.2022.107582 ↗
36. W. Lu, X. Luo, Y. Yang, K. Yan, B. Huang, and P. Li: Mater. Sci. Eng. A, 2020, vol. 780, p. 139218.10.1016/j.msea.2020.139218 ↗
37. X. Huang, L. Huang, H. Peng, Y. Liu, B. Liu, and S. Li: Scr. Mater., 2021, vol. 200, p. 113898.10.1016/j.scriptamat.2021.113898 ↗