Surveying the Effects of Aging a High C-Containing Co-Based Superalloy From the As-Cast and Solution Heat-Treated Conditions
Source abstract
Abstract
Abstract The microstructure of the high carbon-containing cobalt-based superalloy, Co-101, has been studied in the as-cast state and following a variety of heat treatments. In the as-cast state both M7C3 and Mo-rich M23C6 carbides were observed in the interdendritic regions. After thermal exposure at temperatures between 1000 °C and 1250 °C for 1, 10, and 100 hours, the M7C3 interdendritic carbide network was observed to transform into a Mo-lean M23C6 carbide. These changes were rationalized with thermodynamic calculations. The carbide transformation liberated carbide-forming elements that resulted in the precipitation of intragranular carbides in the dendritic regions at temperatures below 1150 °C. These carbides in the cast-aged material preferentially formed at the dendrite peripheries early during exposure, leading to wide particle size distributions. Peak hardness in the cast-aged material was attained within the first 10 hours of exposure and softening was observed thereafter. After solution heat treating at 1250 °C for 10 hours, the microstructure of Co-101 comprised an M23C6 interdendritic carbide network and solid solution dendrites supersaturated with carbide-forming elements. Subsequent aging of this microstructure for 100 hours at 900 °C led to a high number density and narrow particle size distribution of intragranular carbides. The characteristics of these carbides in the solution-aged material resulted in greater hardness, which was retained for longer durations of exposure, than the cast-aged specimens.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Advanced Materials Characterization Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. D.L. Klarstrom: J. Mater. Eng. Perform., 1993, vol. 2, pp. 523–30.10.1007/BF02661736 ↗
2. M. Riddihough: Tribology, 1970, vol. 3, pp. 211–15.10.1016/0041-2678(70)90058-8 ↗
3. C.P. Sullivan, M.J. Donachie, F.R. Morral: Cobalt-base superalloys, Centre d’Information du Cobalt, 1970.
4. C.T. Sims: JOM, 1969, vol. 21, pp. 27–42.10.1007/BF03378800 ↗
5. C.P. Sullivan, J.D. Varin, and M.J. Donachie Jr.: Met. Eng. Q., 1969, vol. 9, pp. 16–29.
6. R. Ahmed, H.V. de Lovelock, N.H. Faisal, and S. Davies: Tribol. Int., 2014, vol. 80, pp. 98–114.10.1016/j.triboint.2014.06.015 ↗
7. A.L. Ramírez, J. Porcayo-Calderon, Z. Mazur, V.M. Salinas-Bravo, L. Martinez-Gomez: Adv. Mater. Sci. Eng., 2016, Article ID 1745839.10.1155/2016/1745839 ↗
8. S. Zangeneh and H. Farhangi: Mater. Des., 2010, vol. 31, pp. 3504–11.10.1016/j.matdes.2010.02.021 ↗
9. S. Zangeneh, H.R. Lashgari, and M. Asnavandi: Eng. Failure Anal., 2018, vol. 84, pp. 276–86.10.1016/j.engfailanal.2017.11.018 ↗
10. W.H. Jiang, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 1999, vol. 271, pp. 101–08.10.1016/S0921-5093(99)00183-5 ↗
11. D.L. Klarstrom: Heat Treatment of Cobalt-Base Alloys, ASM Handbook, Vol. 4E, G.E. Totten & D.S. MacKenzie (eds), 2016.10.31399/asm.hb.v04e.a0006267 ↗
12. J.P. Moffat, T.E. Whitfield, K.A. Christofidou, E.J. Pickering, N.G. Jones, and H.J. Stone: Metals, 2020, vol. 10, p. 248.10.3390/met10020248 ↗
13. W. Gui, H. Zhang, M. Yang, T. Jin, X. Sun, and Q. Zheng: J. Alloys Compd., 2017, vol. 728, pp. 145–51.10.1016/j.jallcom.2017.08.287 ↗
14. M. Wang, D. Flahaut, Z. Zhang, and I.P. Jones: J. Alloys Compd., 2019, vol. 781, pp. 751–60.10.1016/j.jallcom.2018.12.095 ↗
15. K. Wieczerzak, P. Bala, R. Dziurka, T. Tokarski, G. Cios, T. Koziel, and L. Gondek: J. Alloys Compd., 2017, vol. 698, pp. 673–84.10.1016/j.jallcom.2016.12.252 ↗
16. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
17. W. Gui, H. Zhang, M. Yang, T. Jin, X. Sun, and Q. Zheng: J. Alloys Compd., 2017, vol. 695, pp. 1271–78.10.1016/j.jallcom.2016.10.256 ↗
18. J. Friedel: Dislocations, Pergamon Press, London, 1964.
19. E. Orowan: Symposium on Internal Stresses in Metals and Alloys, Institute of Metals; Faraday Society pp. 447, 1948.
20. W.H. Jiang, H.R. Guan, and Z.Q. Hu: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2251–54.10.1007/s11661-999-0038-4 ↗