journal article·2025-02Open access

Heat Treatment Optimisation of Electron Beam Welded Reactor Pressure Vessel Steel

Kirstie Bruce, Mark Taylor, Jonathan W. Fellowes, Ken Gyves, Kexue Li, Katie L. Moore, Luke D. Burling, John A. Francis, Ed J. Pickering

Abstract

Abstract Electron beam welding (EBW) is a promising technology for the joining of large steel components such as pressure vessels. Notably, EBW does not use a filler metal, meaning that the weld and parent material (PM) should have the same composition. Accordingly, it may be possible to homogenise microstructure and properties across the weld given a suitable post-weld heat treatment (PWHT), essentially making the weld ‘disappear’. To investigate this possibility, three different PWHTs were applied to an SA508 Grade 4N weld. A stress-relief PWHT only had a relatively minor impact on the variations in microstructure and hardness across the fusion zone (FZ), heat-affected zone (HAZ) and PM versus the as-welded state, and compositional microsegregation in the FZ was unchanged. Hardness was successfully homogenised across the parent and weld in heat treatments involving a traditional 860 °C austenitisation, quench and temper, but compositional microsegregation persisted in the FZ. The addition of a homogenisation step at 1200 °C eliminated this microsegregation, with the weld area only remaining visible owing to the presence of compositional banding in the PM. However, homogenisation also led to the formation of undesirable prior austenite grain structures following subsequent re-austenitisation at 860 °C. Nevertheless, the application of PWHTs involving a full re-austenitisation seems promising for future applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. K. Suzuki: Reactor Pressure Vessel Materials, The Japan Steel Works Ltd., Shinagawa City, 1998.
2. ASME: ASME Boil. Press. Vessel Code Sect., 2013, vol. 6, pp. 915–25.
3. G. Obasi, E.J. Pickering, A.N. Vasileiou, Y.L. Sun, D.W. Rathod, M. Preuss, J.A. Francis, and M.C. Smith: Metall. Mater. Trans. A, 2019, vol. 50A(4), pp. 1715–31.10.1007/s11661-018-05102-y ↗
4. K.H. Lee, S.G. Park, M.C. Kim, B.S. Lee, and D.M. Wee: Mater. Sci. Eng. A, 2011, vol. 529, pp. 156–63.10.1016/j.msea.2011.09.012 ↗
5. D. Xia, C. Zhou, Y. Liu, J. Wang, C. Fu, K. Wang, and M. Li: Electrochemistry, 2013, vol. 81(4), pp. 262–68.10.5796/electrochemistry.81.262 ↗
6. K.H. Lee, M.J. Jhung, M.C. Kim, and B.S. Lee: Nucl. Eng. Technol. Eng. Technol., 2014, vol. 46(3), pp. 413–22.10.5516/NET.07.2013.088 ↗
7. W. Guo, S. Dong, J.A. Francis, and L. Li: Mater. Sci. Eng. A, 2015, vol. 625, pp. 65–80.10.1016/j.msea.2014.11.056 ↗
8. B.S. Lee, M.C. Kim, J.H. Yoon, and J.H. Hong: Int. J. Press. Vessels Pip., 2010, vol. 87(1), pp. 74–80.10.1016/j.ijpvp.2009.11.001 ↗
9. K.H. Lee, S.G. Park, M.C. Kim, and B.S. Lee: Mater. Sci. Eng. A, 2012, vol. 534, pp. 75–82.10.1016/j.msea.2011.11.043 ↗
10. S.G. Park, M.C. Kim, B.S. Lee, and D.M. Wee: J. Nucl. Mater.Nucl. Mater., 2010, vol. 407(2), pp. 126–35.10.1016/j.jnucmat.2010.09.004 ↗
11. K.R. Ayres, P.R. Hurrell, C.M. Gill, K. Bridger, L.D. Burling, C.S. Punshon, L. Wei, and N. Bagshaw: Development of reduced pressure electron beam welding process for thick section pressure vessel welds. In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. American Society of Mechanical Engineers Digital Collection. 2010. pp. 39–4810.1115/PVP2010-25957 ↗
12. B. Baufeld and T. Dutilleul: Electron beam welding of large components for the nuclear industry. In MATEC Web of Conferences. EDP Sciences. 2019. vol. 269, p. 0200910.1051/matecconf/201926902009 ↗
13. M. Vural: Chapter 6.02 Welding Processes and Technologies, Comprehensive Materials Processing, Elsevier, Amsterdam, 2014.
14. N. Bailey: Chapter 1: Factors Influencing Weldability, Weldability of Ferritic Steels, Elsevier, Amsterdam, 1994.10.1533/9781845698935 ↗
15. A. Wisbey, D. Tsivoulas, and M. Chatterton: WP1 material and component production. Research and development on advanced material and manufacturing, theme 1—structural materials, stage 2. Technical report, Wood, Walton House, Birchwood, Warrington, Cheshire, UK WA3 6GA, 2019.
16. B. Baufeld, J. Priest, and T. Dutilleul: Elektronika ir Elektrotechnika, 2018, vol. 53, p. 136.
17. J. Duffy: Modelling the electron beam welding of nuclear reactor pressure vessel steel. Master’s thesis, University of Cambridge, August 2014.
18. M.C. Smith, Y. Sun, V. Akrivos, A.N. Vasileiou, E.J. Pickering, N. Irvine, A. Carruthers, and J. Collins: Electron beam welding in SA508 Grade 4N and Grade 3 class 1 thick-section steels. Technical report, The University of Manchester, 2019.
19. M.L. Blackmore, N. Bagshaw, M.N.R. Al-Husseini, K. Muszka, B.P. Wynne, and J. Talamantes-Silva: Qualification of Hollow Ingot Technology in Safety Critical Forgings and Fabrications. 20th International Forgemasters Meeting 2017, 2017.
20. A.J. Cooper, A. Wisbey, W. Kyffin, T. Dutilleul, M. Nunn, C. Punshon, M.C. Smith, E.J. Pickering, V. Akrivos, and A.W. Carruthers. Post Weld Heat Treatment and Fracture Toughness Evaluation of Electron Beam Welded SA508 Alloys. Pressure Vessels and Piping Conference, 87486:V005T06A027, 2023.10.1115/PVP2023-104710 ↗
21. M. Taylor, A.D. Smith, J.M. Donoghue, T.L. Burnett, and E.J. Pickering: Scripta Mater. Mater., 2024, vol. 242, p. 115924.10.1016/j.scriptamat.2023.115924 ↗
22. J. Collins, M. Taylor, A.L. Scarlett, E.J. Palmiere, and E.J. Pickering: Mater CharactCharact, 2024, vol. 208, p. 113656.10.1016/j.matchar.2024.113656 ↗
23. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9(3), pp. 286–96.10.1361/105994900770345935 ↗
24. S.G. Park, K.H. Lee, M.C. Kim, and B.S. Lee: Mater. Sci. Eng. A, 2013, vol. 561, pp. 277–84.10.1016/j.msea.2012.10.078 ↗
25. M.C. Kim, S.G. Park, K.H. Lee, and B.S. Lee: Int. J. Pressure Vessels Piping, 2015, vol. 131, pp. 60–66.10.1016/j.ijpvp.2015.04.010 ↗
26. M.C. Kim, K.H. Lee, B.S. Lee, and W.W. Kim. Mechanical properties of SA508 Gr. 4N model alloys as a high strength RPV steel. In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. American Society of Mechanical Engineers Digital Collection. 2010. pp. 143–48.10.1115/PVP2010-26002 ↗
27. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall. Metall., 1984, vol. 32(11), pp. 1949–62.10.1016/0001-6160(84)90176-7 ↗
28. A.N. Vasileiou, M.C. Smith, and J.A. Francis: Mater. Des., 2021, vol. 209, p. 109924.10.1016/j.matdes.2021.109924 ↗
29. T. Hara, N. Maruyama, Y. Shinohara, H. Asahi, G. Shigesato, M. Sugiyama, and T. Koseki: ISIJ Int., 2009, vol. 49, pp. 1792–1800.10.2355/isijinternational.49.1792 ↗
30. R. Homma: Trans. Iron Steel Inst. Jpn., 1974, vol. 14, pp. 434–43.10.2355/isijinternational1966.14.434 ↗
31. M. Taylor, Y.H. Mozumder, A.D. Smith, A.E. Davis, F. Scenini, P.B. Prangnell, and E.J. Pickering: IOP Conf. Ser., 2024, vol. 1310, p. 012001.10.1088/1757-899X/1310/1/012001 ↗
32. G. Da Rosa, P. Maugis, A. Portavoce, J. Drillet, N. Valle, E. Lentzen, and K. Hoummada: Acta Mater. Mater., 2020, vol. 182, pp. 226–34.10.1016/j.actamat.2019.10.029 ↗
33. M. Hillert: Acta Metall. Metall., 1988, vol. 36(12), pp. 3177–81.10.1016/0001-6160(88)90053-3 ↗
34. H.K.D.H. Bhadeshia: J. Mater. Sci., 1983, vol. 18, pp. 1473–81.10.1007/BF01111967 ↗
35. E.J. Pickering and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45A(7), pp. 2983–97.10.1007/s11661-014-2253-x ↗