Deformation Mechanisms of (100) and (110) Single-Crystal BCC Gum Metal Studied by Nanoindentation and Micropillar Compression
Source abstract
Abstract
Abstract In this paper, small-scale testing techniques—nanoindentation and micropillar compression—were used to investigate the deformation mechanisms, size effects, and strain rate sensitivity of (100) and (110) single-crystal Gum Metal at the micro/nanoscale. It was observed that the (100) orientation exhibits a significant size effect, resulting in hardness values ranging from 1 to 5 GPa. Conversely, for the (110) orientation, this effect was weaker. Furthermore, the yield strength obtained from the micropillar compression tests was approximately 740 MPa for the (100) orientation and 650 MPa for the (110) orientation. The observed deformations were consistent with the established features of the deformation behavior of body-centered cubic (bcc) alloys: significant strain rate sensitivity with no depth dependence, pile-up patterns comparable to those reported in the literature, and shear along the {112}<111> slip directions. However, the investigated material also exhibited Gum Metal-like high ductility, a relatively low modulus of elasticity, and high yield strength, which distinguishes it from classic bcc alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. M. Tanaka, M. Takemoto, S. Fujibayashi, T. Kawai, S. Yamaguchi, T. Kizuki, T. Matsushita, T. Kokubo, T. Nakamura, and S. Matsuda: J. Mater. Sci. Mater. Med., 2014, vol. 25, pp. 635–43. https://doi.org/10.1007/s10856-013-5101-4.10.1007/s10856-013-5101-4 ↗
2. S. Jamalpour Najmabad, M. Seyed Razzaghi, and F. Nateghi Alahi: J. Press. Vessel. Pip., 2021, vol. 194, p. 104530. https://doi.org/10.1016/j.ijpvp.2021.104530.10.1016/j.ijpvp.2021.104530 ↗
3. T. Saito, T. Furuta, J.-H. Hwang, S. Kuramoto, K. Nishino, N. Suzuki, R. Chen, A. Yamada, K. Ito, Y. Seno, T. Nonaka, H. Ikehata, N. Nagasako, C. Iwamoto, Y. Ikuhara, and T. Sakuma: Science, 2003, vol. 300, pp. 464–67. https://doi.org/10.1126/science.1081957.10.1126/science.1081957 ↗
4. S. Yuan, N. Lin, Q. Zeng, H. Zhang, and Y. Wu: Crit. Rev. Solid State Mater. Sci., 2023, vol. 48, pp. 257–88. https://doi.org/10.1080/10408436.2022.2050887.10.1080/10408436.2022.2050887 ↗
5. T. Li, J.W. Morris, N. Nagasako, S. Kuramoto, and D.C. Chrzan: Phys. Rev. Lett., 2007, vol. 98, p. 105503. https://doi.org/10.1103/PhysRevLett.98.105503.10.1103/PhysRevLett.98.105503 ↗
6. V.A. Vorontsov, N.G. Jones, K.M. Rahman, and D. Dye: Acta Mater., 2015, vol. 88, pp. 323–33. https://doi.org/10.1016/j.actamat.2015.01.033.10.1016/j.actamat.2015.01.033 ↗
7. Y. Kamimura, S. Katakura, K. Edagawa, S. Takeuchi, S. Kuramoto, and T. Furuta: Mater. Trans., 2016, vol. 57, pp. 1526–34. https://doi.org/10.2320/matertrans.M2016191.10.2320/matertrans.M2016191 ↗
8. N. Takesue, Y. Shimizu, T. Yano, M. Hara, and S. Kuramoto: J. Cryst. Growth, 2009, vol. 311, pp. 3319–24. https://doi.org/10.1016/j.jcrysgro.2009.03.052.10.1016/j.jcrysgro.2009.03.052 ↗
9. J.W. Morris, Y. Hanlumyuang, M. Sherburne, E. Withey, D.C. Chrzan, S. Kuramoto, Y. Hayashi, and M. Hara: Acta Mater., 2010, vol. 58, pp. 3271–80. https://doi.org/10.1016/j.actamat.2010.02.001.10.1016/j.actamat.2010.02.001 ↗
10. F. Niessen and E. Pereloma: Adv. Eng. Mater., 2022, https://doi.org/10.1002/adem.202200281.10.1002/adem.202200281 ↗
11. E.M. Hildyard, L.D. Connor, L.R. Owen, D. Rugg, N. Martin, H.J. Stone, and N.G. Jones: Acta Mater., 2020, vol. 199, pp. 129–40. https://doi.org/10.1016/j.actamat.2020.08.004.10.1016/j.actamat.2020.08.004 ↗
12. W. Zhang, P. Yang, X. Liang, Y. Cao, S. Ouyang, Y. Liu, and Z. Wu: J. Alloys Compd., 2020, vol. 835, p. 155332. https://doi.org/10.1016/j.jallcom.2020.155332.10.1016/j.jallcom.2020.155332 ↗
13. E.M. Hildyard, L.D. Connor, N.L. Church, T.E. Whitfield, N. Martin, D. Rugg, H.J. Stone, and N.G. Jones: Acta Mater., 2022, vol. 237, p. 118161. https://doi.org/10.1016/j.actamat.2022.118161.10.1016/j.actamat.2022.118161 ↗
14. T.-S. Jun, D.E.J. Armstrong, and T.B. Britton: J. Alloys Compd., 2016, vol. 672, pp. 282–91. https://doi.org/10.1016/j.jallcom.2016.02.146.10.1016/j.jallcom.2016.02.146 ↗
15. Z. Zhang, T.-S. Jun, T.B. Britton, and F.P.E. Dunne: Acta Mater., 2016, vol. 118, pp. 317–30. https://doi.org/10.1016/j.actamat.2016.07.044.10.1016/j.actamat.2016.07.044 ↗
16. T.-S. Jun, Z. Zhang, G. Sernicola, F.P.E. Dunne, and T.B. Britton: Acta Mater., 2016, vol. 107, pp. 298–309. https://doi.org/10.1016/j.actamat.2016.01.057.10.1016/j.actamat.2016.01.057 ↗
17. M. Tane, S. Akita, T. Nakano, K. Hagihara, Y. Umakoshi, M. Niinomi, and H. Nakajima: Acta Mater., 2008, vol. 56(12), pp. 2856–63. https://doi.org/10.1016/j.actamat.2008.02.017.10.1016/j.actamat.2008.02.017 ↗
18. Y. Pan, Q. Sun, L. Xiao, X. Ding, and J. Sun: Mater. Sci. Eng. A, 2019, vol. 743, pp. 798–803. https://doi.org/10.1016/j.msea.2018.11.140.10.1016/j.msea.2018.11.140 ↗
19. T. Furuta, S. Kuramoto, J.W. Morris, N. Nagasako, E. Withey, and D.C. Chrzan: Scripta Mater., 2013, vol. 68, pp. 767–72. https://doi.org/10.1016/j.scriptamat.2013.01.027.10.1016/j.scriptamat.2013.01.027 ↗
20. K. Golasiński, E. Pieczyska, M. Maj, M. Staszczak, P. Świec, T. Furuta, and S. Kuramoto: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 53. https://doi.org/10.1007/s43452-020-00055-9.10.1007/s43452-020-00055-9 ↗
21. E. Pieczyska, M. Maj, K. Golasiński, M. Staszczak, T. Furuta, and S. Kuramoto: Materials, 2018, vol. 11, p. 567. https://doi.org/10.3390/ma11040567.10.3390/ma11040567 ↗
22. R.P. Sankaran, V.B. Ozdol, C. Ophus, J. Kacher, C. Gammer, S. Govindjee, A.M. Minor, and J.W. Morris: Acta Mater., 2018, vol. 151, pp. 334–46. https://doi.org/10.1016/j.actamat.2018.03.048.10.1016/j.actamat.2018.03.048 ↗
23. E.A. Withey, A.M. Minor, D.C. Chrzan, J.W. Morris, and S. Kuramoto: Acta Mater., 2010, vol. 58, pp. 2652–65. https://doi.org/10.1016/j.actamat.2009.12.052.10.1016/j.actamat.2009.12.052 ↗
24. E.A. Withey, M. Jin, A. Minor, S. Kuramoto, D.C. Chrzan, and J.W. Morris: Mater. Sci. Eng. A, 2008, vol. 493, pp. 26–32. https://doi.org/10.1016/j.msea.2007.07.097.10.1016/j.msea.2007.07.097 ↗
25. E.A. Withey, J. Ye, A.M. Minor, S. Kuramoto, D.C. Chrzan, and J.W. Morris: Exp. Mech., 2010, vol. 50, pp. 37–45. https://doi.org/10.1007/s11340-008-9210-9.10.1007/s11340-008-9210-9 ↗
26. W.C. Oliver and G.M. Pharr: J. Mater. Res., 2004, vol. 19, pp. 3–20. https://doi.org/10.1557/jmr.2004.19.1.3.10.1557/jmr.2004.19.1.3 ↗
27. M.A.G. Maneiro and J. Rodríguez: Scripta Mater., 2005, vol. 52, pp. 593–98. https://doi.org/10.1016/j.scriptamat.2004.11.029.10.1016/j.scriptamat.2004.11.029 ↗
28. D. Nečas and P. Klapetek: Open Phys., 2012, vol. 10, pp. 181–88. https://doi.org/10.2478/s11534-011-0096-2.10.2478/s11534-011-0096-2 ↗
29. K.M. Golasiński, R. Detsch, M. Szklarska, B. Łosiewicz, M. Zubko, S. Mackiewicz, E.A. Pieczyska, and A.R. Boccaccini: J. Mech. Behav. Biomed. Mater., 2021, vol. 115, p. 104289. https://doi.org/10.1016/j.jmbbm.2020.104289.10.1016/j.jmbbm.2020.104289 ↗
30. Y. Fu, W. Xiao, J. Wang, L. Ren, X. Zhao, and C. Ma: J. Mater. Sci. Technol., 2021, vol. 76, pp. 122–28. https://doi.org/10.1016/j.jmst.2020.11.018.10.1016/j.jmst.2020.11.018 ↗
31. D. Tabor: The Hardness of Metals, The Clarendon Press, 1951, p. 1–18.
32. D. González, J. Alkorta, J.M. Martínez-Esnaola, and J. Gil Sevillano: Comput. Mater. Sci., 2014, vol. 82, pp. 314–19. https://doi.org/10.1016/j.commatsci.2013.10.004.10.1016/j.commatsci.2013.10.004 ↗
33. J. Varillas, J. Očenášek, J. Torner, and J. Alcalá: Acta Mater., 2021, vol. 217, p. 117122. https://doi.org/10.1016/j.actamat.2021.117122.10.1016/j.actamat.2021.117122 ↗
34. C.R. Weinberger, B.L. Boyce, and C.C. Battaile: Int. Mater. Rev., 2013, vol. 58, pp. 296–314. https://doi.org/10.1179/1743280412Y.0000000015.10.1179/1743280412Y.0000000015 ↗