journal article·2024-01

Modeling Phase Selection and Extended Solubility in Rapid Solidified Alloys

Azeez Akinbo, Yijia Gu

Publisher page

Abstract

A new phase selection model based on the time-dependent nucleation theory was developed to investigate the effect of rapid solidification on extended solubility. The model was applied to predict the solubility as a function of undercooling for several binary Al alloys. The predictions of both eutectic and peritectic systems show good agreement with experimental data. It was demonstrated that the developed model is better than the T0 line method, which neglected the kinetic process of nucleation. Furthermore, the model can also be applied to ternary and multicomponent phases assuming the nucleation is limited by the scarcest species or the slowest diffuser. The feasibility and reliability of the new model make it a useful tool for novel alloy design for rapid solidification processes such as additive manufacturing.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. W.E. Frazier: Metal additive manufacturing: a review. J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917–28. https://doi.org/10.1007/s11665-014-0958-z.10.1007/s11665-014-0958-z ↗
2. D. Herlach: Non-equilibrium solidification of undercooled metallic metls. Mater. Sci. Eng. R. Rep., 1994, vol. 12, pp. 177–272. https://doi.org/10.1016/0927-796X(94)90011-6.10.1016/0927-796X(94)90011-6 ↗
3. H. Jones: The status of rapid solidification of alloys in research and application. J. Mater. Sci., 1984, vol. 19, pp. 1043–76. https://doi.org/10.1007/BF01120015.10.1007/BF01120015 ↗
4. F.H. Froes, Y.-W. Kim, and S. Krishnamurthy: Rapid solidification of lightweight metal alloys. Mater. Sci. Eng. A, 1989, vol. 117, pp. 19–32. https://doi.org/10.1016/0921-5093(89)90082-8.10.1016/0921-5093(89)90082-8 ↗
5. D. Herlach: Non-equilibrium solidification of undercooled metallic melts. Metals (Basel), 2014, vol. 4, pp. 196–234. https://doi.org/10.3390/met4020196.10.3390/met4020196 ↗
6. K. Eckler, D.M. Herlach, R.G. Hamerton, and A.L. Greer: Dendrite growth velocities in highly undercooled, dilute Ni-C melts. Mater. Sci. Eng. A, 1991, vol. 133, pp. 730–33. https://doi.org/10.1016/0921-5093(91)90173-K.10.1016/0921-5093(91)90173-K ↗
7. K. Eckler, R.F. Cochrane, D.M. Herlach, B. Feuerbacher, and M. Jurisch: Evidence for a transition from diffusion-controlled to thermally controlled solidification in metallic alloys. Phys. Rev. B, 1992, vol. 45, pp. 5019–22. https://doi.org/10.1103/PhysRevB.45.5019.10.1103/PhysRevB.45.5019 ↗
8. K. Eckler, A.F. Norman, F. Gärtner, A.L. Greer, and D.M. Herlach: Microstructures of dilute Ni C alloys obtained from undercooled droplets. J. Cryst. Growth, 1997, vol. 173, pp. 528–40. https://doi.org/10.1016/S0022-0248(96)01066-4.10.1016/S0022-0248(96)01066-4 ↗
9. K. Eckler and D. Herlach: Measurements of dendrite growth velocities in undercooled pure Ni-melts—some new results. Mater. Sci. Eng. A, 1994, vol. 178, pp. 159–62. https://doi.org/10.1016/0921-5093(94)90535-5.10.1016/0921-5093(94)90535-5 ↗
10. Y. Wu, T.J. Piccone, Y. Shiohara, and M.C. Flemings: Dendritic growth of undercooled nickel-tin: Part I. Metall. Trans. A, 1987, vol. 18, pp. 915–24. https://doi.org/10.1007/BF02646933.10.1007/BF02646933 ↗
11. Y. Wu, T.J. Piccone, Y. Shiohara, and M.C. Flemings: Dendritic growth of undercooled nickel-tin: Part II. Metall. Mater. Trans. A, 1987, vol. 18, pp. 925–32. https://doi.org/10.1007/BF02646934.10.1007/BF02646934 ↗
12. Y. Wu, T.J. Piccone, Y. Shiohara, and M.C. Flemings: Dendritic growth of undercooled nickel-tin: Part III. Metall. Trans. A, 1988, vol. 19, pp. 1109–19. https://doi.org/10.1007/BF02628395.10.1007/BF02628395 ↗
13. A. Munitz, A.B. Gokhale, and R. Abbaschian: Effect of supercooling on the microstructure of Al-Nb alloys. J. Mater. Sci., 2000, vol. 35, pp. 2263–71. https://doi.org/10.1023/A:1004783011253.10.1023/A:1004783011253 ↗
14. N.J.E. Adkins, N. Saunders, and P. Tsakiropoulos: Rapid solidification of peritectic aluminium alloys. Mater. Sci. Eng., 1988, vol. 98, pp. 217–19. https://doi.org/10.1016/0025-5416(88)90158-9.10.1016/0025-5416(88)90158-9 ↗
15. M.G. Chu, A. Giron, and D.A. Granger: Microstructure and heat flow in melt-spun aluminum alloys, in Proc. ASM’s Int. Conf. Rapidly Solidified Mater., Metals Park, OH, 1986, pp. 311–16.
16. M.G. Chu and D.A. Granger: Solidification and microstructure analysis of rapidly solidified melt-spun Al-Fe alloys. Metall. Trans. A, 1990, vol. 21, pp. 205–12. https://doi.org/10.1007/BF02656437.10.1007/BF02656437 ↗
17. G. Waterloo and H. Jones: Microstructure and thermal stability of melt-spun Al-Nd and Al-Ce alloy ribbons. J. Mater. Sci., 1996, vol. 31, pp. 2301–10. https://doi.org/10.1007/BF01152938.10.1007/BF01152938 ↗
18. J. Xu, Q. Zhou, J. Kong, Y. Peng, S. Guo, J. Zhu, and J. Fan: Solidification behavior and microstructure of Ti-(37–52) at% Al alloys synthesized in situ via dual-wire electron beam freeform fabrication. Addit. Manuf., 2021, https://doi.org/10.1016/j.addma.2021.1021139.10.1016/j.addma.2021.1021139 ↗
19. Q. Tan, Y. Yin, A. Prasad, G. Li, Q. Zhu, D.H. StJohn, and M.X. Zhang: Demonstrating the roles of solute and nucleant in grain refinement of additively manufactured aluminium alloys. Addit. Manuf., 2022, https://doi.org/10.1016/j.addma.2021.102516.10.1016/j.addma.2021.102516 ↗
20. M. Opprecht, J.-P. Garandet, G. Roux, and C. Flament: An understanding of duplex microstructures encountered during high strength aluminium alloy laser beam melting processing. Acta Mater., 2021, vol. 215, p. 117024. https://doi.org/10.1016/j.actamat.2021.117024.10.1016/j.actamat.2021.117024 ↗
21. F. Xiao, S. Wang, Y. Wang, D. Shu, G. Zhu, B. Sun, and D. StJohn: Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting. J. Alloys Compd., 2022, vol. 900, p. 163427. https://doi.org/10.1016/j.jallcom.2021.163427.10.1016/j.jallcom.2021.163427 ↗
22. Y. Wang, X. Lin, N. Kang, Z. Wang, Q. Wang, Y. Liu, and W. Huang: Laser powder bed fusion of Zr-modified Al–Cu–Mg alloy: crack-inhibiting, grain refinement, and mechanical properties. Mater. Sci. Eng. A, 2022, vol. 838, p. 142618. https://doi.org/10.1016/j.msea.2022.142618.10.1016/j.msea.2022.142618 ↗
23. Z. Wang, X. Lin, Y. Tang, N. Kang, X. Gao, S. Shi, and W. Huang: Laser-based directed energy deposition of novel Sc/Zr-modified Al-Mg alloys: columnar-to-equiaxed transition and aging hardening behavior. J. Mater. Sci. Technol., 2021, vol. 69, pp. 168–79. https://doi.org/10.1016/j.jmst.2020.08.003.10.1016/j.jmst.2020.08.003 ↗
24. Q. Li, G. Li, X. Lin, D. Zhu, J. Jiang, S. Shi, F. Liu, W. Huang, and K. Vanmeensel: Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms. Addit. Manuf., 2022, vol. 57, p. 102967. https://doi.org/10.1016/j.addma.2022.102967.10.1016/j.addma.2022.102967 ↗
25. Z. Wang, X. Lin, N. Kang, J. Chen, H. Tan, Z. Feng, Z. Qin, H. Yang, and W. Huang: Laser powder bed fusion of high-strength Sc/Zr-modified Al–Mg alloy: phase selection, microstructural/mechanical heterogeneity, and tensile deformation behavior. J. Mater. Sci. Technol., 2021, vol. 95, pp. 40–56. https://doi.org/10.1016/j.jmst.2021.03.069.10.1016/j.jmst.2021.03.069 ↗
26. Z. Wang, X. Lin, L. Wang, Y. Cao, Y. Zhou, and W. Huang: Microstructure evolution and mechanical properties of the wire + arc additive manufacturing Al-Cu alloy. Addit. Manuf., 2021, vol. 47, p. 102298. https://doi.org/10.1016/j.addma.2021.102298.10.1016/j.addma.2021.102298 ↗
27. M. Asta, C. Beckermann, A. Karma, W. Kurz, R. Napolitano, M. Plapp, G. Purdy, M. Rappaz, and R. Trivedi: Solidification microstructures and solid-state parallels: recent developments, future directions. Acta Mater., 2009, vol. 57, pp. 941–71. https://doi.org/10.1016/j.actamat.2008.10.020.10.1016/j.actamat.2008.10.020 ↗
28. W. Kurz, M. Rappaz, and R. Trivedi: Progress in modelling solidification microstructures in metals and alloys. Part II: dendrites from 2001 to 2018. Int. Mater. Rev., 2021, vol. 66, pp. 30–76. https://doi.org/10.1080/09506608.2020.1757894.10.1080/09506608.2020.1757894 ↗
29. P.K. Galenko and D. Jou: Rapid solidification as non-ergodic phenomenon. Phys. Rep., 2019, vol. 818, pp. 1–70. https://doi.org/10.1016/j.physrep.2019.06.002.10.1016/j.physrep.2019.06.002 ↗
30. J.C. Baker and J.W. Cahn: Thermodynamics of solidification, in The Selected Works of John W. Cahn. Wiley, Hoboken, 2013, pp. 253–88. https://doi.org/10.1002/9781118788295.ch26.10.1002/9781118788295.ch26 ↗
31. J.L. Murray: Thermodynamic factors in the extension of solid solubility in Al-based alloys. MRS Proc., 1982, vol. 19, p. 249. https://doi.org/10.1557/PROC-19-249.10.1557/PROC-19-249 ↗
32. G. Shao and P. Tsakiropoulos: Prediction of phase selection in rapid solidification using time dependent nucleation theory. Acta Metall. Mater., 1994, vol. 42, pp. 2937–42. https://doi.org/10.1016/0956-7151(94)90391-3.10.1016/0956-7151(94)90391-3 ↗
33. J.-O.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Thermo-Calc & DICTRA, computational tools for materials science. Calphad Comput. Coupling Phase Diagr. Thermochem., 2002, vol. 26, pp. 273–312. https://doi.org/10.1016/S0364-5916(02)00037-8.10.1016/S0364-5916(02)00037-8 ↗
34. W. Cao, S.-L.L. Chen, F. Zhang, K. Wu, Y. Yang, Y.A.A. Chang, R. Schmid-Fetzer, and W.A.A. Oates: PANDAT software with PanEngine, PanOptimizer and PanPrecipitation for multi-component phase diagram calculation and materials property simulation. Calphad Comput. Coupling Phase Diagr. Thermochem., 2009, vol. 33, pp. 328–42. https://doi.org/10.1016/j.calphad.2008.08.004.10.1016/j.calphad.2008.08.004 ↗
35. J.A. Cahill and A.V. Grosse: Viscosity and self-diffusion of liquid thallium from its melting point to about 1300°K. J. Phys. Chem., 1965, vol. 69, pp. 518–21. https://doi.org/10.1021/j100886a026.10.1021/j100886a026 ↗
36. https://materials.springer.com/. (n.d.).
37. V.T. Witusiewicz, A.A. Bondar, U. Hecht, J. Zollinger, V.M. Petyukh, O.S. Fomichov, V.M. Voblikov, and S. Rex: Experimental study and thermodynamic re-assessment of the binary Al-Ta system. Intermetallics, 2010, vol. 18, pp. 92–106. https://doi.org/10.1016/j.intermet.2009.06.015.10.1016/j.intermet.2009.06.015 ↗
38. R. Ichikawa, T. Ohashi, and T. Ikeda: Effects of cooling rate and supercooling degree on solidified structure of Al-Mn, Al-Cr and Al-Zr in rapid solidification. Trans. Jpn. Inst. Met., 1971, vol. 12, pp. 280–84.10.2320/matertrans1960.12.280 ↗
39. L.Y. Zhang, Y.H. Jiang, Z. Ma, S.F. Shan, Y.Z. Jia, C.Z. Fan, and W.K. Wang: Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy. J. Mater. Process. Technol., 2008, vol. 207, pp. 107–11. https://doi.org/10.1016/j.jmatprotec.2007.12.059.10.1016/j.jmatprotec.2007.12.059 ↗
40. J.A. Taylor: Iron-containing intermetallic phases in Al-Si based casting alloys. Procedia Mater. Sci., 2012, vol. 1, pp. 19–33. https://doi.org/10.1016/j.mspro.2012.06.004.10.1016/j.mspro.2012.06.004 ↗
41. W.S. Ebhota and T.-C. Jen: Intermetallics formation and their effect on mechanical properties of Al-Si-X alloys, in Intermetallic Compounds—Formation and Applications. InTech, London, 2018. https://doi.org/10.5772/intechopen.73188.10.5772/intechopen.73188 ↗
42. E. Cinkilic, C.D. Ridgeway, X. Yan, and A.A. Luo: A formation map of iron-containing intermetallic phases in recycled cast aluminum alloys. Metall. Mater. Trans. A, 2019, vol. 50, pp. 5945–56. https://doi.org/10.1007/s11661-019-05469-6.10.1007/s11661-019-05469-6 ↗
43. E. Cinkilic, M. Moodispaw, J. Zhang, J. Miao, and A.A. Luo: A new recycled Al–Si–Mg alloy for sustainable structural die casting applications. Metall. Mater. Trans. A, 2022, vol. 53, pp. 2861–73. https://doi.org/10.1007/s11661-022-06711-4.10.1007/s11661-022-06711-4 ↗
44. M. Yıldırım and D. Özyürek: The effects of Mg amount on the microstructure and mechanical properties of Al–Si–Mg alloys. Mater. Des., 2013, vol. 51, pp. 767–74. https://doi.org/10.1016/j.matdes.2013.04.089.10.1016/j.matdes.2013.04.089 ↗
45. K.E. Knipling, D.C. Dunand, and D.N. Seidman: Criteria for developing castable, creep-resistant aluminum-based alloys—a review. Zeitschrift Für Met., 2006, vol. 97, pp. 246–65. https://doi.org/10.3139/146.101249.10.3139/146.101249 ↗
46. J.F. Nie and B.C. Muddle: Microstructural design of high-strength aluminum alloys. J. Phase Equilib., 1998, vol. 19, pp. 543–51. https://doi.org/10.1361/105497198770341734.10.1361/105497198770341734 ↗
47. M.E. van Dalen, D.C. Dunand, and D.N. Seidman: Effects of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al–Sc alloys. Acta Mater., 2005, vol. 53, pp. 4225–35. https://doi.org/10.1016/j.actamat.2005.05.022.10.1016/j.actamat.2005.05.022 ↗
48. D.N. Seidman, E.A. Marquis, and D.C. Dunand: Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys. Acta Mater., 2002, vol. 50, pp. 4021–35. https://doi.org/10.1016/S1359-6454(02)00201-X.10.1016/S1359-6454(02)00201-X ↗
49. E. Marquis, D. Seidman, M. Asta, and C. Woodward: Composition evolution of nanoscale AlSc precipitates in an Al–Mg–Sc alloy: experiments and computations. Acta Mater., 2006, vol. 54, pp. 119–30. https://doi.org/10.1016/j.actamat.2005.08.035.10.1016/j.actamat.2005.08.035 ↗