journal article·2023-09Open access

Incorporating Dislocation Mechanisms into a Phenomenological Cyclic Plasticity Model for Structural Alloys

Kwai S. Chan

Abstract

This article presents an approach to incorporating dislocation mechanisms into a phenomenological cyclic plasticity model that describes the cyclic hardening and softening response of structural alloys in the low cumulative plastic strain (microplastic) and high cumulative plastic strain (macroplastic) regimes. The cyclic constitutive model extends an existing microstructure-based Ramberg–Osgood type model, called MicroROM, for representing the stress-strain curves of Ni-based superalloys subjected to monotonic loading to cyclic loading by considerations of pertinent dislocation mechanisms in face-centered cubic (fcc) alloys and metals. The dislocation mechanisms considered include multipole trapping of dislocation pileups on parallel slip planes and its breakdown by cross slip, leading to the formation of low-energy dislocation structures by multiple slip. These considerations of the various dislocation mechanisms lead to a Ramberg–Osgood type constitutive model that describes the strain hardening response associated with single slip in the low cumulative plastic strain regime (before macroscopic yielding at 0.2 pct plastic strain offset), the strain hardening response during multiple slip in the high cumulative plastic strain regime (beyond macroscopic yielding at greater than 0.2 pct plastic strain offset), and the evolution of cyclic hardening to cyclic softening induced by the onset of shear localization. Applications of the extended cyclic plasticity model to several fcc metals and Ni-based superalloys are presented.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. W. Ramberg and W.R. Osgood: Technical Note 503: Determination of Stress–strain Curves by Three Parameters, National Advisory Committee on Aeronautics (NACA), 1941.
2. DARWIN® User’s Guide. Southwest Research Institute, San Antonio, TX, 2013.
3. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40A(7), pp. 1588–603. https://doi.org/10.1007/s11661-009-9858-5.10.1007/s11661-009-9858-5 ↗
4. T.A. Parthasarathy, S.I. Rao, and D.M. Dimiduk: Superalloys, TMS (The Minerals, Metals & Materials Society), Warrendale, PA, 2004, vol. 2004, pp. 887–96.
5. L. Tabourot, M. Fivel, and E. Rauch: Mater. Sci. Eng. A, 1997, vol. 234–236, pp. 639–42.10.1016/S0921-5093(97)00353-5 ↗
6. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377–90.10.1016/j.actamat.2015.07.048 ↗
7. K.S. Chan: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5353–67.10.1007/s11661-018-4878-7 ↗
8. K.S. Chan: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 5653–66.10.1007/s11661-020-05965-0 ↗
9. K.S. Chan: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 1759–76.10.1007/s11661-021-06187-8 ↗
10. K.S. Chan: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 106–20. https://doi.org/10.1007/s11661-022-06848-210.1007/s11661-022-06848-2 ↗
11. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
12. B.H. Kear and H.G.F. Wilsdorf: Trans. Metall. Soc. AIME, 1962, vol. 224, pp. 382–86.
13. P. Li, Z.F. Zhang, S.X. Li, and G. Wang: Phil. Mag., 2009, vol. 89, pp. 2903–20.10.1080/14786430903130847 ↗
14. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–79.10.1016/0001-6160(83)90007-X ↗
15. H. Mughrabi and R. Wang: in Basic Mechanisms in Fatigue of Metals, Edited by P. Lukas and J. Polak, Elsevier, Academia and Amsterdam, Prague, 1988, pp. 1–13.
16. N.Y. Jin and A.T. Winter: Acta Metall., 1984, vol. 32, pp. 989–95.10.1016/0001-6160(84)90001-4 ↗
17. P. Li, S.X. Li, Z.G. Wang, and Z.F. Zhang: Acta Mater., 2010, vol. 58, pp. 3281–94.10.1016/j.actamat.2010.02.002 ↗
18. P. Li, S.X. Li, Z.G. Zhang, and Z.F. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6244–47.10.1016/j.msea.2010.06.040 ↗
19. Z. Wang, B. Gong, and G. Wang: Acta Mater., 1999, vol. 47, pp. 307–15.10.1016/S1359-6454(98)00302-4 ↗
20. Z. Wang: Phil. Mag., 2004, vol. 84, pp. 351–79.10.1080/14786430310001639824 ↗
21. B. Gong, Z. Wang, and Z.G. Wang: Acta Mater., 1999, vol. 47, pp. 317–24.10.1016/S1359-6454(98)00304-8 ↗
22. P. Li, S. Li, Z. Wang, and Z. Zhang: Metall. Mater. Trans. A, 2019, vol. 41A, pp. 2532–37.
23. T. Fujii, H. Shintate, H. Yaguchi, H. Mitani, A. Inada, K. Shinkai, S. Kumai, and M. Kato: ISIJ Int., 1997, vol. 37, pp. 1230–36.10.2355/isijinternational.37.1230 ↗
24. J. Bretschneider, C. Holste, and B. Tippelt: Acta Mater., 1997, vol. 45, pp. 3775–83.10.1016/S1359-6454(97)00030-X ↗
25. A. Weidner, J. Man, W. Tirschler, P. Klapetek, C. Blochwitz, J. Polak, and W. Skrotzki: Mater. Sci. Eng. A, 2008, vol. 492, pp. 118–27.10.1016/j.msea.2008.03.027 ↗
26. K.S. Chan, J.W. Tian, B. Yang, and P.K. Liaw: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2545–56. https://doi.org/10.1007/s11661-009-9980-4.10.1007/s11661-009-9980-4 ↗
27. E. Huang, R.I. Barabash, Y. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike, and D.L. Klarstrom: Int. J. Plast., 2008, vol. 24, pp. 1440–56.10.1016/j.ijplas.2007.10.001 ↗
28. J. Polak, J. Man, T. Vystavel, and M. Petrenec: Mater. Sci. Eng. A, 2009, vol. 517, pp. 204–11.10.1016/j.msea.2009.03.070 ↗
29. S.J. Kim, R.T. Dewa, W.G. Kim, and M.H. Kim: Adv. Mater. Sci. Eng., 2015, https://doi.org/10.1155/2015/207497.10.1155/2015/207497 ↗
30. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537–62.
31. D.K. Wilsdorf: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 369–417.10.1007/s11661-004-0351-x ↗
32. P.D. Neumann: Acta Metall., 1971, vol. 19, pp. 1233–241.10.1016/0001-6160(71)90057-5 ↗
33. P.M. Hazzledine: Scripta Metall., 1971, vol. 5, pp. 847–50.10.1016/0036-9748(71)90056-1 ↗
34. P.M. Hazzledine: Can. J. Phys., 1967, vol. 45, pp. 765–75.10.1139/p67-058 ↗
35. C.N. Reid: Deformation Geometry for Materials Scientist, Pergamon Press, Oxford, 1973, p. 712.
36. G. Saada: Solid State Phenom., 1998, vol. 59–60, pp. 77–98.10.4028/www.scientific.net/SSP.59-60.77 ↗
37. G. Saada and P. Veyssiere: in Dislocation in Solids, edited by F.R.N. Nabarro and M. S. Duesbery, Elsevier Science, 2002, Ch. 61, 415–57.
38. B. Escaig: in Dislocation Dynamics, edited by A. R. Rosenfield, G. T. Hahn, A. L. Bement, Jr., and R. I. Jaffee, McGraw-Hill, N.Y. 1967, pp. 655–77.
39. M.J. Whelan: Proc. R. Soc. A, 1959, vol. 249, pp. 114–37.
40. J. Washburn: Appl. Phys. Lett., 1965, vol. 7, pp. 183–85.10.1063/1.1754369 ↗
41. F.C. Frank and W.T. Read: Phys. Rev., 1950, vol. 79, pp. 722–30.10.1103/PhysRev.79.722 ↗
42. J.P. Hirth: J. Appl. Phys., 1961, vol. 32, pp. 700–06.10.1063/1.1736074 ↗
43. W.M. Lomer: Phil. Mag., 1951, vol. 42, pp. 1327–31.10.1080/14786444108561389 ↗
44. A.H. Cottrell: Dislocation and Plastic Flow in Crystals, Oxford University, UK, 1953.
45. N. Thompson: Proc. Phys. Soc. Lond., 1953, vol. 66B, pp. 481–92.10.1088/0370-1301/66/6/304 ↗
46. V.V. Bulatov, L.L. Hsiung, M. Tang, A. Arsenlis, M.C. Bartelt, W. Cai, J.N. Florando, M. Hiratani, M. Rhee, G. Homms, T.G. Pierce, and T. Diaz de la Rubia: Nature, 2006, vol. 440, pp. 1174–78.10.1038/nature04658 ↗
47. R. Madec, B. Devincre, L. Kubin, T. Hoc, and D. Rodney: Science, 2003, vol. 301, pp. 1879–82.10.1126/science.1085477 ↗
48. N. Verdhan and R. Kapoor: Indian J. Mater. Sci. 201410.1155/2014/715356 ↗
49. J.S. Koehler: Phys. Rev., 1982, vol. 86, pp. 52–59.10.1103/PhysRev.86.52 ↗
50. W.G. Johnston and J.J. Gilman: J. Appl. Phys., 1960, vol. 31, pp. 632–43.10.1063/1.1735655 ↗
51. H. Fujita and H. Yamada: J. Phys. Soc. Jpn., 1970, vol. 29, pp. 132–39.10.1143/JPSJ.29.132 ↗
52. F.F. Lavrentev: Mater. Sci. Eng., 1980, vol. 46, pp. 191–208.10.1016/0025-5416(80)90175-5 ↗
53. T. P. Gabb, J. Telesman, P. T. Kantzos, and K. O’Connor: Characterization of the temperature capabilities of advanced disk alloy ME3. NASA/TM-2002-211796. NASA Glenn Research Center, Cleveland, OH, 2002.
54. T. P. Gabb, A. Garg, D. L. Ellis, and K. M. O’Connor: Detailed Microstructural Characterization of the Disk Alloy ME3. NASA/TM-2004-213066. NASA Glenn Research Center, Cleveland, 2004
55. Z. Arechabaleta, P. van Liempt, and J. Sietsma: Acta Mater., 2016, vol. 115, pp. 314–23.10.1016/j.actamat.2016.05.040 ↗
56. Z. Arechabaleta, P. van Liempt, and J. Sietsma: Mater. Sci. Eng. A, 2018, vol. 710, pp. 329–33.10.1016/j.msea.2017.10.099 ↗