The Influence of Alloying Segregation on Zinc-Induced Embrittlement at the α/γ-Fe Interface
Source abstract
Abstract
Zinc-assisted liquid metal embrittlement (LME) crack propagation is often intergranular and occurs following the interphase (α/γ) boundaries. In this work, the influence of alloying element X (Al, Cr, Mn, Mo, Nb and Ti) in steel segregation on zinc-induced embrittlement at the α/γ-Fe interface was investigated using first principles methods. The calculations predict that Nb and Mn (Mo, Al and Ti) atoms from the γ bulk allow energetically favorable segregation to the γ(α) side of the interfacial site, while the Cr atom tends to partition to the α-Fe matrix. Compared to Al, Ti, Mn and Cr, Zn has a stronger tendency to enrich at the α/γ interphase boundaries and matrix. Our results demonstrate that the presence of Zn atoms weakens the bonding of iron atoms at the interface, while the segregation of Al, Mn, Mo, Nb and Ti atoms increases Zn-induced interface cohesion. It was also found that the segregation of X atoms changes the charge environment around the α/γ-Fe interface and affects the bond characteristics among metal atoms, which reduces the detrimental effect of Zn. Based on the effect of segregation on the interfacial cohesion, Al, Mn, Mo and Ti atoms, which show a preferable tendency to segregate to the α/γ interface, are considered beneficial elements to improve the thermodynamic stability at the zinc-induced α/γ-Fe interface.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. N.S. Stoloff: Surf. Interfaces. II., 1968, vol. 14, pp. 157–82.10.1007/978-1-4757-0178-4_5 ↗
2. M.G. Nicholas and C.F. Old: J. Mater. Sci., 1979, vol. 14, pp. 1–18.10.1007/BF01028323 ↗
3. R. Ashiri, M. Shamanian, H.R. Salimijazi, M.A. Haque, J.H. Bae, C.W. Ji, K.G. Chin, and Y.D. Park: Scripta. Mater., 2016, vol. 114, pp. 41–47.10.1016/j.scriptamat.2015.11.027 ↗
4. D. Bhattacharya: Mater. Sci. Technol., 2018, vol. 34, pp. 1809–29.10.1080/02670836.2018.1461595 ↗
5. Z. Ling, T. Chen, L. Kong, M. Wang, H. Pan, and M. Lei: Metall. Mater. Trans. A., 2019, vol. 50, pp. 5128–42.10.1007/s11661-019-05388-6 ↗
6. C. Beal, X. Kleber, D. Fabregue, and M. Bouzekri: Scripta Mater., 2012, vol. 66, pp. 1030–33.10.1016/j.scriptamat.2011.12.040 ↗
7. C. Beal, X. Kleber, D. Fabrègue, and M. Bouzekri: Mater. Sci. Forum., 2017, vol. 706–709, pp. 2041–46.
8. S.P. Murugan, J. Kim, J. Kim, Y. Wan, C. Lee, J.B. Jeon, and Y.D. Park: Surf. Coat. Tech., 2020, vol. 398, p. 126069.10.1016/j.surfcoat.2020.126069 ↗
9. H. Kang, L. Cho, C. Lee, and B.C. Cooman: Metall. Mater. Trans. A., 2016, vol. 47, pp. 2885–2905.10.1007/s11661-016-3475-x ↗
10. G. Jung, I.S. Woo, D.W. Suh, and S.J. Kim: Metal. Mater. Int., 2016, vol. 22, pp. 187–95.10.1007/s12540-016-5579-7 ↗
11. M.H. Razmpoosh, A. Macwan, F. Goodwin, E. Biro, and Y. Zhou: Mater. Lett., 2020, vol. 267, p. 127511.10.1016/j.matlet.2020.127511 ↗
12. M.H. Razmpoosh, E. Biro, D.L. Chen, and Y. Zhou: Mater. Charact., 2018, vol. 145, pp. 627–33.10.1016/j.matchar.2018.09.018 ↗
13. M.H. Razmpoosh, C. Digiovanni, Y.N. Zhou, and E. Biro: Prog. Mater. Sci., 2021, vol. 121, p. 100798.10.1016/j.pmatsci.2021.100798 ↗
14. K.D. Bauer, M. Todorova, K. Hingerl, and J. Neugebbauer: Acta. Mater., 2015, vol. 90, pp. 69–76.10.1016/j.actamat.2015.02.018 ↗
15. D. Bhattacharya, L. Cho, E. Aa, H. Ghassemi-Armaki, A. Pichler, K.O. Findley, and J.G. Speer: Scripta. Mater., 2020, vol. 175, pp. 49–54.10.1016/j.scriptamat.2019.09.006 ↗
16. L. Cho, H. Kang, C. Lee, and B.C. Cooman: Scripta. Mater., 2014, vol. 90–91, pp. 25–28.10.1016/j.scriptamat.2014.07.008 ↗
17. D. Bhattacharya, L. Cho. E. Aa, A. Pichler and J. G. Speer: Mater. Sci. Eng. A., 2020, vol. 804, pp. 140391.10.1016/j.msea.2020.140391 ↗
18. G. Jung, I.S. Woo, D.W. Suh, and S.J. Kim: Met. Mater. Int., 2016, vol. 22, pp. 187–95.10.1007/s12540-016-5579-7 ↗
19. A.J. Mortlock: Acta. Metall., 1960, vol. 8, pp. 132–34.10.1016/0001-6160(60)90099-7 ↗
20. S.H. Hong, J.H. Kang, D. Kim, and S.J. Kim: Surf. Coat. Tech., 2020, vol. 393, p. 125809.10.1016/j.surfcoat.2020.125809 ↗
21. P. Lejek and M. Sob: J. Mater. Sci., 2014, vol. 49, pp. 2477–82.10.1007/s10853-013-7943-z ↗
22. D. Raabe, M. Herbig, S. SandoBes, Y. Li, D. Kuzmina, D. Ponge, and P.P. Choi: Curr. Opin. Solid. State. Mater., 2014, vol. 18, pp. 253–61.10.1016/j.cossms.2014.06.002 ↗
23. M.A. Gibson and C.A. Schuh: Scripta. Mater., 2016, vol. 113, pp. 55–58.10.1016/j.scriptamat.2015.09.041 ↗
24. W.T. Geng, A.J. Freeman, and G.B. Olson: Phys. Rev. B., 2001, vol. 63, p. 165415.10.1103/PhysRevB.63.165415 ↗
25. J. Wang, M. Enomoto, and C. Shang: Scripta. Mater., 2020, vol. 185, pp. 42–46.10.1016/j.scriptamat.2020.03.053 ↗
26. Y. Mishin, M. Asta, and J. Li: Acta. Mater., 2010, vol. 58, p. 1117e1151.
27. K.D. Bauer, M. Todorova, K. Hingerl, and J. Neugebauer: Acta. Mater., 2015, vol. 90, pp. 69–76.10.1016/j.actamat.2015.02.018 ↗
28. W. Peng, H. Peng, G. Wu, and J.Y. Zhang: Comp. Mater. Sci., 2020, vol. 171, p. 109204.10.1016/j.commatsci.2019.109204 ↗
29. D. Scheiber, K. Prabitz, L. Romaner, and W. Ecker: Acta. Mater., 2020, vol. 195, pp. 750–60.10.1016/j.actamat.2020.06.001 ↗
30. G. Kresse, G. Kresse, and J. Furthmüller: Phys. Rev. B., 1996, vol. 54, p. 11169.10.1103/PhysRevB.54.11169 ↗
31. G. Kresse and J. Furthmuller: Comp. Mater. Sci., 1996, vol. 6, pp. 15–50.10.1016/0927-0256(96)00008-0 ↗
32. J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, p. 3865.10.1103/PhysRevLett.77.3865 ↗
33. G. Kresse and D. Joubert: Phys. Rev. B., 1999, vol. 59, pp. 1758–75.10.1103/PhysRevB.59.1758 ↗
34. G. Henkelman, B.P. Uberuaga, and H. Jónsson: J. Chem. Phys., 2000, vol. 113, pp. 9901–04.10.1063/1.1329672 ↗
35. G. Henkelman and H. Jonsson: J. Chem. Phys., 2000, vol. 113, pp. 9978–85.10.1063/1.1323224 ↗
36. P.E. Blochl: Phys. Rev. B., 1994, vol. 50, p. 17953.10.1103/PhysRevB.50.17953 ↗
37. C.K. Ande and M.H.F. Sluiter: Acta. Mater., 2010, vol. 58, pp. 6276–81.10.1016/j.actamat.2010.07.049 ↗
38. H. Cheng, C. Zhang, X.L. Liu, H. Huang, S.Y. Zhuang, P. Han, and X. Wu: J. Mol. Model., 2015, vol. 21, p. 181.10.1007/s00894-015-2780-4 ↗
39. M.J. Kelley and N.S. Stoloff: Metall. Trans. A., 1975, vol. 6, pp. 159–66.10.1007/BF02673684 ↗