journal article·2024-10Open access

Pearlite Growth Kinetics in Fe-C-Mn Eutectoid Steels: Quantitative Evaluation of Energy Dissipation at Pearlite Growth Front Via Experimental Approaches

Y.-J. Zhang, T. Umeda, S. Morooka, S. Harjo, G. Miyamoto, T. Furuhara

Abstract

Abstract Essential understanding of the pearlite growth kinetics is of great significance to predict the lamellar spacing and the resultant mechanical properties of pearlitic steels. In this study, a series of eutectoid steels with Mn addition up to 2 mass pct were isothermally transformed at various temperatures from 873 K to 973 K to clarify the pearlite growth kinetics and the underlying thermodynamics at its growth front. The microscopic observation indicates the acceleration in pearlite growth rate and refinement in lamellar spacing by decreasing the transformation temperature or the amount of Mn addition. After analyzing the solute distribution at pearlite growth front via three-dimensional atom probe, no macroscopic Mn partitioning across pearlite/austenite interface is detected, whereas Mn segregation is only observed at ferrite/austenite interface. Furthermore, in-situ neutron diffraction measurements performed at elevated temperatures reveal that the magnitude of elastic strain generated during pearlite transformation is very small. Based on the thermodynamic model, these experimental results are used to estimate the contribution of various factors to the total energy dissipation. Compared with the Mn-free alloy, the retardation effect of Mn addition on pearlite growth kinetics, which is partly due to the reduced driving force for pearlite growth, can be well explained by further considering the solute drag effect of Mn.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. C. Borchers and R. Kirchheim: Prog. Mater. Sci., 2016, vol. 82, pp. 405–44.10.1016/j.pmatsci.2016.06.001 ↗
2. A.R. Marder and B.L. Bramfitt: Metall. Trans. A, 1976, vol. 7, pp. 365–72.10.1007/BF02642832 ↗
3. W.C. Leslie: The Physical Metallurgy of Steels, Hempisphere Pub. Corp, Washington, 1981, pp. 142–88.
4. N. Ridley: Metall. Trans. A, 1984, vol. 15, pp. 1019–36.10.1007/BF02644694 ↗
5. M.P. Puls and J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 2777–96.10.1007/BF02652844 ↗
6. C. Zener: Trans. AIME, 1946, vol. 167, pp. 550–95.
7. M. Hillert: Jernkont. Ann., 1957, vol. 141, pp. 757–89.
8. J.M. Shapiro and J.S. Kirkaldy: Acta Metall., 1968, vol. 16, pp. 579–85.10.1016/0001-6160(68)90132-6 ↗
9. B.E. Sundquist: Acta Metall., 1968, vol. 16, pp. 1413–27.10.1016/0001-6160(68)90037-0 ↗
10. M. Hillert: The role of interfaces in phase transformations, in The Mechanism of Phase Transformation in Crystalline Solids. Institute of Metals, London, 1969, pp. 231–47.
11. J.W. Cahn: Acta Metall., 1959, vol. 7, pp. 18–28.10.1016/0001-6160(59)90164-6 ↗
12. M. Hillert: Metall. Trans., 1972, vol. 3, pp. 2729–41.10.1007/BF02652840 ↗
13. F. Togashi and T. Nishizawa: J. Jpn. Inst. Met., 1976, vol. 40, pp. 691–700.10.2320/jinstmet1952.40.7_691 ↗
14. J.-Y. Yan, J. Agren, and J. Jeppsson: Metall. Mater. Trans. A, 2020, vol. 51, pp. 1978–2001.10.1007/s11661-020-05679-3 ↗
15. G. Purdy, J. Agren, A. Borgenstam, Y. Brechet, M. Enomoto, T. Furuhara, E. Gamsjager, M. Goune, M. Hillert, C. Hutchinson, M. Militzer, and H. Zurob: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3703–18.10.1007/s11661-011-0766-0 ↗
16. M. Goune, F. Danoix, J. Agren, Y. Brechet, C.R. Hutchinson, M. Militzer, G. Purdy, S. van der Zwaag, and H. Zurob: Mater. Sci. Eng. R, 2015, vol. 92, pp. 1–38.10.1016/j.mser.2015.03.001 ↗
17. N.A. Razik, G.W. Lorimer, and N. Ridley: Acta Metall., 1974, vol. 22, pp. 1249–58.10.1016/0001-6160(74)90138-2 ↗
18. M. Hillert: An analysis of the effect of alloying elements on the pearlite reaction, in Proceedings of the International Conference on Solid-to-Solid Phase Transformations in Inorganic Materials. 1982, pp. 789–806.
19. C.R. Hutchinson, R.E. Hackenberg, and G.J. Shiflet: Acta Mater., 2004, vol. 52, pp. 3565–85.10.1016/j.actamat.2004.04.010 ↗
20. H. Ishigami, N. Nakada, T. Kochi, and S. Nanba: ISIJ Int., 2019, vol. 59, pp. 1667–75.10.2355/isijinternational.ISIJINT-2019-022 ↗
21. J. Chance and N. Ridley: Metall. Trans. A, 1981, vol. 12, pp. 1205–13.10.1007/BF02642334 ↗
22. S.A. Al-Salman, G.W. Lorimer, and N. Ridley: Acta Metall., 1979, vol. 27, pp. 1391–400.10.1016/0001-6160(79)90208-6 ↗
23. M. Hillert and B. Sundman: Acta Metall., 1976, vol. 24, pp. 731–43.10.1016/0001-6160(76)90108-5 ↗
24. G.R. Purdy and Y.J.M. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 3763–74.10.1016/0956-7151(95)90160-4 ↗
25. M. Enomoto: Acta Mater., 1999, vol. 47, pp. 3533–40.10.1016/S1359-6454(99)00232-3 ↗
26. J. Odqvist, M. Hillert, and J. Agren: Acta Mater., 2002, vol. 50, pp. 3211–25.10.1016/S1359-6454(02)00143-X ↗
27. H. Chen and S. van der Zwaag: Acta Mater., 2014, vol. 72, pp. 1–2.10.1016/j.actamat.2014.03.034 ↗
28. G. Miyamoto, K. Yokoyama, and T. Furuhara: Acta Mater., 2019, vol. 177, pp. 187–97.10.1016/j.actamat.2019.07.040 ↗
29. H. Chen, Z.-G. Yang, C. Zhang, K.-Y. Zhu, and S. van der Zwaag: Acta Mater., 2016, vol. 104, pp. 62–71.10.1016/j.actamat.2015.11.012 ↗
30. H.-K. Dong, Y.-J. Zhang, G. Miyamoto, M. Inomoto, H. Chen, Z.-G. Yang, and T. Furuhara: Acta Mater., 2021, vol. 215, p. 117081.10.1016/j.actamat.2021.117081 ↗
31. H.-K. Dong, Y.-J. Zhang, G. Miyamoto, M. Inomoto, W.-W. Zhang, L.-H. Liu, H. Chen, and T. Furuhara: Scripta Mater., 2023, vol. 222, p. 115038.10.1016/j.scriptamat.2022.115038 ↗
32. A. Beche, H.S. Zurob, and C.R. Hutchinson: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2950–55.10.1007/s11661-007-9353-9 ↗
33. C. Qiu, H.S. Zurob, and C.R. Hutchinson: Acta Mater., 2015, vol. 100, pp. 333–43.10.1016/j.actamat.2015.08.065 ↗
34. W.-W. Sun, H.S. Zurob, and C.R. Hutchinson: Acta Mater., 2017, vol. 139, pp. 62–74.10.1016/j.actamat.2017.08.010 ↗
35. I.-E. Benrabah, H.P. Van Landeghem, F. Bonnet, B. Denand, G. Geandier, and A. Deschamps: Acta Mater., 2021, vol. 221, p. 117364.10.1016/j.actamat.2021.117364 ↗
36. D. Raabe, M. Herbig, S. Sandlobes, Y. Li, D. Tytko, M. Kuzmina, D. Ponge, and P.-P. Choi: Curr. Opin. Solid State Mater. Sci., 2014, vol. 18, pp. 253–61.10.1016/j.cossms.2014.06.002 ↗
37. M.M. Aranda, R. Rementeria, J. Poplawsky, E. Urones-Garrote, and C. Capdevila: Scripta Mater., 2015, vol. 104, pp. 67–70.10.1016/j.scriptamat.2015.04.005 ↗
38. N. Nakada and M. Kato: ISIJ Int., 2016, vol. 56, pp. 1866–73.10.2355/isijinternational.ISIJINT-2016-256 ↗
39. T. Takahashi, D. Ponge, and D. Raabe: Steel Res. Int., 2007, vol. 78, pp. 38–44.10.1002/srin.200705857 ↗
40. N. Nakada, N. Koga, T. Tsuchiyama, and S. Takaki: Scripta Mater., 2009, vol. 61, pp. 133–36.10.1016/j.scriptamat.2009.03.028 ↗
41. N. Koga, N. Nakada, T. Tsuchiyama, S. Takaki, M. Ojima, and Y. Adachi: Scripta Mater., 2012, vol. 67, pp. 400–03.10.1016/j.scriptamat.2012.05.034 ↗
42. Y. Amemiya, N. Nakada, S. Morooka, M. Kosaka, and M. Kato: ISIJ Int., 2022, vol. 62, pp. 282–90.10.2355/isijinternational.ISIJINT-2021-164 ↗
43. A. Hultgren: Trans. ASM, 1947, vol. 39, pp. 915–1005.
44. D.E. Coates: Metall. Trans., 1972, vol. 3, pp. 1203–12.10.1007/BF02642453 ↗
45. D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 1077–86.10.1007/BF02645611 ↗
46. J.W. Cahn and W.C. Hagel: Theory of the pearlite reaction, in Decomposition of Austenite by Diffusional Processes. Interscience Pub., New York, 1962, pp. 131–96.
47. B.W. Krakauer and D.N. Seidman: Phys. Rev. B, 1993, vol. 48, pp. 6724–27.10.1103/PhysRevB.48.6724 ↗
48. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
49. M.K. Miller and M.G. Hetherington: Surf. Sci., 1991, vol. 246, pp. 443–49.
50. M. Hillert: Scripta Mater., 2002, vol. 46, pp. 447–53.10.1016/S1359-6462(01)01257-X ↗
51. S. Harjo, T. Kawasaki, Y. Tomota, W. Gong, K. Aizawa, G. Tichy, Z.-M. Shi, and T. Ungar: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4080–92.10.1007/s11661-017-4172-0 ↗
52. G. Miyamoto and T. Furuhara: ISIJ Int., 2020, vol. 60, pp. 2942–53.10.2355/isijinternational.ISIJINT-2020-216 ↗
53. J.J. Kramer, G.M. Pound, and R.F. Mehl: Acta Metall., 1958, vol. 6, pp. 763–71.10.1016/0001-6160(58)90051-8 ↗
54. J.D. Eshelby: Proc. R. Soc. Lond. Ser. A, 1957, vol. 421, pp. 376–96.
55. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
56. G.P. Krielaart and S. van der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–8.10.1179/mst.1998.14.1.10 ↗
57. J.J. Wits, T.A. Kop, Y. van Leeuwen, J. Seitsma, and S. van der Zwaag: Mater. Sci. Eng. A, 2000, vol. 283, pp. 234–41.10.1016/S0921-5093(00)00735-8 ↗
58. M. Hillert and L. Hoglund: Scripta Mater., 2006, vol. 54, pp. 1259–63.10.1016/j.scriptamat.2005.12.023 ↗
59. E. Gamsjager, M. Wiessner, S. Schider, H. Chen, and S. van der Zwaag: Philos. Mag.. Mag., 2015, vol. 95, pp. 2899–2917.10.1080/14786435.2015.1082662 ↗
60. J.-N. Zhu, H.-W. Luo, Z.-G. Yang, C. Zhang, S. van der Zwaag, and H. Chen: Acta Mater., 2017, vol. 133, pp. 258–68.10.1016/j.actamat.2017.05.045 ↗
61. H.-K. Dong, Y.-J. Zhang, G. Miyamoto, H. Chen, Z.-G. Yang, and T. Furuhara: Scripta Mater., 2020, vol. 188, pp. 59–63.10.1016/j.scriptamat.2020.07.007 ↗
62. J. Agren: Scripta Metall., 1986, vol. 20, pp. 1507–10.10.1016/0036-9748(86)90384-4 ↗
63. M. Hillert: Metall. Trans. A, 1975, vol. 6, pp. 5–19.10.1007/BF02673664 ↗