Hydrogen Effects on Hall–Petch Coefficient and Fracture Strength in Pure Ni and Ni-20Cr Alloy: A Macroscopic Insight of the Hydrogen Embrittlement Mechanism
Source abstract
Abstract
Abstract The effects of Cr and H on the yield and fracture strengths in pure Ni and Ni-20Cr alloy were investigated based on the Hall–Petch relationship. The Hall–Petch coefficient, which depends on the dislocation pile-up length and slip transfer resistance at the grain boundaries, drastically increased by 20 pct Cr addition and unchanged by gaseous hydrogen charging at 80 MPa. These results indicate that Cr increased the intergranular stress concentration associated with dislocation pile-up, whereas H did not.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Metal and Thin Film Mechanics · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. T. Omura, J. Nakamura, H. Hirata, K. Jotoku, M. Ueyama, T. Osuki, and M. Terunuma: ISIJ Int., 2016, vol. 56, pp. 405–12.10.2355/isijinternational.ISIJINT-2015-268 ↗
2. C. Izawa, S. Wagner, M. Deutges, M. Martín, S. Weber, R. Pargeter, T. Michler, H.-H. Uchida, R. Gemma, and A. Pundt: Int. J. Hydrog. Energy, 2019, vol. 44, pp. 25064–75.10.1016/j.ijhydene.2019.07.179 ↗
3. K. Kawano-Miyata: Mater. Sci. Eng. A, 2022, vol. 858, p. 144074.10.1016/j.msea.2022.144074 ↗
4. X. Zhou and W.A. Curtin: Acta Mater., 2020, vol. 200, pp. 932–42.10.1016/j.actamat.2020.09.070 ↗
5. K.A. Nibur, D.F. Bahr, and B.P. Somerday: Acta Mater., 2006, vol. 54, pp. 2677–84.10.1016/j.actamat.2006.02.007 ↗
6. N. Kobayashi, M. Koyama, M. Yamamura, T. Hojo, and E. Akiyama: Mater. Trans., 2023, vol. 64, pp. 212–19.10.2320/matertrans.MT-M2022140 ↗
7. M.L. Martin, M. Dadfarnia, A. Nagao, S. Wang, and P. Sofronis: Acta Mater., 2019, vol. 165, pp. 734–50.10.1016/j.actamat.2018.12.014 ↗
8. D.M. Symons: Metall. Mater. Trans. A, 1997, vol. 28, pp. 655–63.10.1007/s11661-997-0051-4 ↗
9. M. Koyama, K. Habib, T. Masumura, T. Tsuchiyama, and H. Noguchi: Int. J. Hydrog. Energy, 2020, vol. 45, pp. 10209–18.10.1016/j.ijhydene.2020.02.014 ↗
10. Y.J. Zhang, D. Han, and X.W. Li: Scripta Mater., 2020, vol. 178, pp. 269–73.10.1016/j.scriptamat.2019.11.049 ↗
11. E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, p. 747.10.1088/0370-1301/64/9/303 ↗
12. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
13. J.D. Eshelby, F.C. Frank, and F.R.N. Nabarro: Lond. Edinburg Dublin Philos. Magaz. J. Sci., 1951, vol. 42, pp. 351–64.10.1080/14786445108561060 ↗
14. J. Weertman and J.R. Weertman: Elementary dislocation theory, Macmillan, 1964.
15. M. Kato: Mater. Trans., 2014, vol. 55, pp. 19–24.10.2320/matertrans.MA201310 ↗
16. T. Narutani and J. Takamura: Acta Metall. Mater., 1991, vol. 39, pp. 2037–49.10.1016/0956-7151(91)90173-X ↗
17. P. Rodriguez: Metall. Mater. Trans. A, 2004, vol. 35, pp. 2697–705.10.1007/s11661-004-0215-4 ↗
18. R.W. Armstrong and P. Rodriguez: Philos. Mag., 2006, vol. 86, pp. 5787–96.10.1080/14786430600764872 ↗
19. S.V. Astafurov, G.G. Maier, E.V. Melnikov, V.A. Moskvina, M.Y. Panchenko, and E.G. Astafurova: Mater. Sci. Eng. A, 2019, vol. 756, pp. 365–72.10.1016/j.msea.2019.04.076 ↗
20. S.-L. Wang and L.E. Murr: Metallography, 1980, vol. 13, pp. 203–24.10.1016/0026-0800(80)90001-4 ↗
21. C.X. Ren, Q. Wang, J.P. Hou, Z.J. Zhang, H.J. Yang, and Z.F. Zhang: Mater. Sci. Eng. A, 2020, vol. 786, p. 139441.10.1016/j.msea.2020.139441 ↗
22. H.J. Frost and M.F. Ashby: Deformation-mechanism maps: the plasticity and creep of metals and ceramics, Pergamon Press, Oxford, 1982.
23. G. Calvarin-Amiri, A.F. Gourgues, A.M. Huntz, and R. Molins: Mater. Sci. Eng. A, 2001, vol. 298, pp. 200–208.10.1016/S0921-5093(00)01319-8 ↗
24. Y. Mine, N. Horita, Z. Horita, and K. Takashima: Int. J. Hydrog. Energy, 2017, vol. 42, pp. 15415–25.10.1016/j.ijhydene.2017.04.249 ↗
25. Y. Oka, A. Morimatsu, T. Masumura, T. Ohmura, and T. Tsuchiyama: Tetsu-to-Hagane, 2024, vol. 110, pp. 302–10.10.2355/tetsutohagane.TETSU-2023-072 ↗
26. T. Boniszewski and G.C. Smith: Acta Metall., 1963, vol. 11, pp. 165–78.10.1016/0001-6160(63)90209-8 ↗
27. K. Wada, J. Yamabe, and H. Matsunaga: Mater. Sci. Eng. A, 2021, vol. 805, p. 140580.10.1016/j.msea.2020.140580 ↗
28. A.H. Cottrell: Dislocations and plastic flow in crystals, Clarendon Press, Oxford, 1956.
29. A.R. Troiano: Metallogr. Microstruct. Anal., 2016, vol. 5, pp. 557–69.10.1007/s13632-016-0319-4 ↗
30. T. Watanabe: Trans. JIM, 1977, vol. 18, pp. 673–78.10.2320/matertrans1960.18.673 ↗
31. I. Han and L. Demir: Phys. Rev. A, 2009, vol. 80, p. 052503.10.1103/PhysRevA.80.052503 ↗
32. M. Koyama, H.Y. Wang, V.K. Verma, K. Tsuzaki, and E. Akiyama: Metall. Mater. Trans. A, 2020, vol. 51, pp. 5612–16.10.1007/s11661-020-05966-z ↗
33. B. Sun, X. Dong, J. Wen, X.-C. Zhang, and S.-T. Tu: Fatigue Fract. Eng. Mater. Struct., 2023, vol. 46, pp. 3060–76.10.1111/ffe.14074 ↗
34. T. Kong, H. Wang, T. Lee, M. Koyama, and E. Akiyama: ISIJ Int., 2024, vol. 64, pp. 688–95.10.2355/isijinternational.ISIJINT-2023-218 ↗
35. C. Zhang, Y. Han, H. Teng, H. Liu, C. Xie, and Y. Su: Int. J. Hydrog. Energy, 2024, vol. 82, pp. 968–78.10.1016/j.ijhydene.2024.08.002 ↗