Demonstration and Analysis of Conditions to Obtain a High Strength Inconel 625 to Stainless Steel 304L Interface by Directed Energy Deposition
Source abstract
Abstract
Abstract Functional grading (FG) is often used to bond dissimilar metals. However, that approach is complicated from a manufacturing perspective, and the associated challenges can outweigh the benefits of FG. Here, we investigate a directly bonded interface by transitioning from stainless steel 304L (SS304L) to Inconel 625 (IN625) using powder-feed directed energy deposition with a laser beam energy source (DED-LB). Both cracking and the presence of carbide phases have been reported in this multi-materials system. Conditions that unambiguously achieve crack-free joints have not yet been established. With DED-LB, we consistently observe solidification cracking in melt pools containing > 50 wt pct SS304L, while no cracking is observed in melt pools with < 40 wt pct SS304L. Variations on the most up-to-date solidification cracking model are applied to gain insight into the cracking dependencies. Parameters that give rise to defect-free single layers also enable defect-free multilayer prints despite the additional thermal cycling. Upon printing and testing full-sized ASTM E8 tensile specimens, the interface is sufficiently strong that failure occurs solely within the SS304L region, indicating a joint strength of > 650 MPa. Thus, a simple method to attain high strength joints for these dissimilar metal alloys is demonstrated.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Y. Miyamoto, W.A. Kaysser, B.H. Rabin, A. Kawasaki, and R.G. Ford, eds.: Functionally Graded Materials, vol. 5, Springer, Boston, 1999.
2. A. Reichardt, A.A. Shapiro, R. Otis, R.P. Dillon, J.P. Borgonia, B.W. McEnerney, P. Hosemann, and A.M. Beese: Int. Mater. Rev., 2021, vol. 66, pp. 1–29.10.1080/09506608.2019.1709354 ↗
3. P. Kah, M. Shrestha, and J. Martikainen: Appl. Mech. Mater., 2013, vol. 440, pp. 269–76.10.4028/www.scientific.net/AMM.440.269 ↗
4. L.D. Bobbio, R.A. Otis, J.P. Borgonia, R.P. Dillon, A.A. Shapiro, Z.-K. Liu, and A.M. Beese: Acta Mater., 2017, vol. 127, pp. 133–42.10.1016/j.actamat.2016.12.070 ↗
5. L.D. Bobbio, B. Bocklund, A. Reichardt, R. Otis, J.P. Borgonia, R.P. Dillon, A.A. Shapiro, B.W. McEnerney, P. Hosemann, Z.-K. Liu, and A.M. Beese: J. Alloys Compd., 2020, vol. 814, p. 151729.10.1016/j.jallcom.2019.151729 ↗
6. B. Onuike and A. Bandyopadhyay: Addit. Manuf., 2018, vol. 22, pp. 844–51.
7. V.E. Beal, P. Erasenthiran, N. Hopkinson, P. Dickens, and C.H. Ahrens: J. Mater. Process. Technol., 2006, vol. 174, pp. 145–54.10.1016/j.jmatprotec.2005.04.101 ↗
8. I. Shishkovsky, F. Missemer, and I. Smurov: Phys. Procedia, 2012, vol. 39, pp. 382–91.10.1016/j.phpro.2012.10.052 ↗
9. M.S. Domack and J.M. Baughman: Rapid Prototyp. J., 2005, vol. 11, pp. 41–51.10.1108/13552540510573383 ↗
10. F.F. Noecker II and J.N. DuPont. DOI:https://doi.org/10.26153/TSW/384010.26153/TSW/3840 ↗
11. B.E. Carroll, R.A. Otis, J.P. Borgonia, J. Suh, R.P. Dillon, A.A. Shapiro, D.C. Hofmann, Z.-K. Liu, and A.M. Beese: Acta Mater., 2016, vol. 108, pp. 46–54.10.1016/j.actamat.2016.02.019 ↗
12. B. Chen, Y. Su, Z. Xie, C. Tan, and J. Feng: Opt. Laser Technol., 2020, vol. 123, p. 105916.10.1016/j.optlastec.2019.105916 ↗
13. K. Shah, I. Ul Haq, A. Khan, S.A. Shah, M. Khan, and A.J. Pinkerton: Mater. Des. 1980–2015, 2014, vol. 54, pp. 531–38.
14. X. Zhang, Y. Chen, and F. Liou: Sci. Technol. Weld. Join., 2019, vol. 24, pp. 504–16.10.1080/13621718.2019.1589086 ↗
15. D.R. Feenstra, A. Molotnikov, and N. Birbilis: J. Mater. Sci., 2020, vol. 55, pp. 13314–3328.10.1007/s10853-020-04913-y ↗
16. N.F. Jones, J.L. Beuth, and M.P. de Boer: J. Mater. Res., 2021, vol. 36, pp. 3701–712.10.1557/s43578-021-00304-4 ↗
17. S. Kou: Acta Mater., 2015, vol. 88, pp. 366–74.10.1016/j.actamat.2015.01.034 ↗
18. T. Soysal and S. Kou: Acta Mater., 2018, vol. 143, pp. 181–97.10.1016/j.actamat.2017.09.065 ↗
19. C. Xia and S. Kou: Sci. Technol. Weld. Join., 2020, vol. 25, pp. 690–97.10.1080/13621718.2020.1802897 ↗
20. T. Soysal: Weld. World, 2021, vol. 65, pp. 1943–954.10.1007/s40194-021-01132-0 ↗
21. T. Soysal and B. Erk: J. Mater. Eng. Perform., 2022, https://doi.org/10.1007/s11665-022-07667-7.10.1007/s11665-022-07667-7 ↗
22. G. Tang, B.J. Gould, A. Ngowe, and A.D. Rollett: Metall. Mater. Trans. A, 2022, vol. 53, pp. 1486–498.10.1007/s11661-022-06612-6 ↗
23. K. Zhang, W. Liu, and X. Shang: Opt. Laser Technol., 2007, vol. 39, pp. 549–57.10.1016/j.optlastec.2005.10.009 ↗
24. A.B. Spierings, M. Schneider, and R. Eggenberger: Rapid Prototyp. J., 2011, vol. 17, pp. 380–86.10.1108/13552541111156504 ↗
25. S.L. Jeng, H.T. Lee, T.E. Weirich, and W.P. Rebach: Mater. Trans., 2007, vol. 48, pp. 481–89.10.2320/matertrans.48.481 ↗
26. H. Naffakh, M. Shamanian, and F. Ashrafizadeh: J. Mater. Process. Technol., 2009, vol. 209, pp. 3628–639.10.1016/j.jmatprotec.2008.08.019 ↗
27. S.J. Wolff, S. Lin, E.J. Faierson, W.K. Liu, G.J. Wagner, and J. Cao: Acta Mater., 2017, vol. 132, pp. 106–17.10.1016/j.actamat.2017.04.027 ↗
28. D.F. Susan, J.D. Puskar, J.A. Brooks, and C.V. Robino: Mater Charact, 2006, vol. 57, pp. 36–43.10.1016/j.matchar.2005.12.005 ↗
29. Y. Hu, X. Lin, Y. Li, S. Zhang, Q. Zhang, W. Chen, W. Li, and W. Huang: Mater. Sci. Eng. A, 2021, vol. 817, p. 141309.10.1016/j.msea.2021.141309 ↗
30. M. Rombouts, G. Maes, and R. Persoons: in Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Taylor & Francis Group, Leiria, 2011, pp. 333–3710.1201/b11341-53 ↗
31. M. Rombouts, G. Maes, M. Mertens, and W. Hendrix: J. Laser Appl., 2012, vol. 24, p. 052007.10.2351/1.4757717 ↗
32. Z. Wang, T.A. Palmer, and A.M. Beese: Acta Mater., 2016, vol. 110, pp. 226–35.10.1016/j.actamat.2016.03.019 ↗
33. Y. Hu, X. Lin, Y. Li, Y. Ou, X. Gao, Q. Zhang, W. Li, and W. Huang: J. Alloys Compd., 2021, vol. 870, p. 159426.10.1016/j.jallcom.2021.159426 ↗
34. G.P. Dinda, A.K. Dasgupta, and J. Mazumder: Mater. Sci. Eng. A, 2009, vol. 509, pp. 98–104.10.1016/j.msea.2009.01.009 ↗
35. L. Qin, C. Chen, M. Zhang, K. Yan, G. Cheng, H. Jing, and X. Wang: Rapid Prototyp. J., 2017, vol. 23, pp. 1119–29.10.1108/RPJ-05-2016-0081 ↗
36. S. Misra, I. Mohanty, M.S. Raza, R. Chakraborty, P. Chatterjee, M. Gopal, S. Ponkshe, P. Saha, and C.S. Kumar: Surf. Coat. Technol., 2022, vol. 447, p. 128818.10.1016/j.surfcoat.2022.128818 ↗
37. S. Floreen, G. Fuchs, and W. Yang: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., The Minerals, Metals and Materials Society: Pittsburgh, 1994, pp. 13–37
38. Pandat—Phase Diagram Calculation software package for Multicomponent Systems, Computherm LLC, Middleton, 2001.
39. Thermo-Calc: Thermo-Calc Software AB, Stockholm, Sweden, 2021, p. 2021.
40. M. De Oliveira, A. Couto, G. Almeida, D. Reis, N. De Lima, and R. Baldan: Metals, 2019, vol. 9, p. 301.10.3390/met9030301 ↗
41. G. Barragan, D.A. Rojas Perilla, J. Grass Nuñez, F. Mariani, and R. Coelho: J. Mater. Eng. Perform., 2021, vol. 30, pp. 5297–5306.10.1007/s11665-021-05762-9 ↗
42. M.J. Cieslak: Weld. J., 1991, vol. 70, pp. 49s–56s.
43. J.N. DuPont, J.C. Lippold, and S.D. Kiser: in Welding metallurgy and weldability of nickel-base alloys, Wiley, Hoboken, 2009, pp. 327–78.10.1002/9780470500262.ch7 ↗
44. R.A. Patterson and J.O. Milewski: Weld. J., 1985, vol. 64, pp. 227s–s231.
45. M. Shakil, M. Ahmad, N.H. Tariq, B.A. Hasan, J.I. Akhter, E. Ahmed, M. Mehmood, M.A. Choudhry, and M. Iqbal: Vacuum, 2014, vol. 110, pp. 121–26.10.1016/j.vacuum.2014.08.016 ↗