A novel technique for manufacturing metal-bonded Nd-Fe-B magnets by squeeze casting
Source abstract
Abstract
A new method was developed for forming Nd-Fe-B rapidly quenched ribbon to metal-bonded magnets. The process was carried out by a squeeze casting technique. The A356 aluminum alloy and zinc alloy (ZAS) were used as metal binders. The energy product (BH) of A356-bonded magnet was 62.2 k J/m3 and that of ZAS-bonded magnet was 61.2 k J/m3. The maximum bending strength of ZAS-bonded magnets (259 MPa) was greater than that of A356-bonded magnets (148 MPa). The corrosion behavior of both magnets was studied in the salt spray test and the magnetization flux loss was measured. The magnetization flux loss of ZAS-bonded magnets is less than that of A356-bonded magnets due to Zn as a sacrificial anode to protect MQ powders.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties of Alloys · Magnetic Properties and Applications · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. M.Q. Huang, L.Y. Zhang, B.M. Ma, Y. Zheng, J.M. Elbiciki, W.E. Wallace, and S.G. Sankar: J. Appl. Phys., 1991, vol. 70 (10), pp. 6027–29.10.1063/1.350082 ↗
2. W. Rodewald, M. Velicescu, B. Wall, and G.M. Reppel: Proc. 12th Workshop on RE-Magnets and Their Applications, Canberra, Australia, University West Australia, July, 1992, p. 191.
3. W. Rodewald, B. Wall, M. Kntter, M. Velicescu, and P. Schrey: 37th Annual Conference on Magnetism and Magnetic Materials, Houston, TX, 1992, p. CP-13.
4. Satoshi Hirosawa and Yoshiyuki Tsubokawa: J. Magn. Magn. Mater., 1990, vol. 84, pp. 309–16.10.1016/0304-8853(90)90109-4 ↗
5. A. Verma, P. Verma, and R.K. Sidhu: Bull. Mater. Sci., 1996, vol. 19(3), pp. 539–548.10.1007/BF02744826 ↗
6. R.M.W. Stmat, S. Liu, and K.J. Stmat: Proc. 5th Int. Workshop on Rare Earth Cobalt Permanent Magnets and Their Application, Roanoke, VA, University of Dayton, June, 1981, pp. 609–28.
7. M. Velicescu, B. Wall, W. Rodewald, and G.M. Reppel: IEEE Trans., 1993, vol. 29 (6), pp. 2827–29.
8. T.S. Chin, K.H. Cheng, and J.M. Yao: J. Alloys Compounds, 1995, vol. 222, pp. 148–52.10.1016/0925-8388(94)04938-6 ↗
9. W. Rodewald, B. Wall, M. Kaller, M. Volicescu, and P. Schrey: J. Appl. Phys., 1993, vol. 73 (10), pp. 5899–5901.10.1063/1.353515 ↗
10. P.A.P. Wendhansen, A. Handstein, P. Nothnagel, D. Eckert, and K.H. Muller: Phys. Status Solidi. 1991, (a), vol. 127, pp. K121-K124.10.1002/pssa.2211270245 ↗
11. R.M.W. Strnat, S. Liu, and K.J. Strnat: J. Appl. Phys., 1982, vol. 53, p. 2380.10.1063/1.330864 ↗
12. R.M.W. Strnat, J.P. Clarke, H.A. Leupoid, and A. Tauber: J. Appl. Phys., 1987, vol. 61 (8), pp. P3463-P3465.10.1063/1.338754 ↗
13. N. Rowlinson, M.M.A. Shraf, and I.R. Harris: J. Magn. Magn. Mater., 1989, vol. 80, pp. 93–96.10.1016/0304-8853(89)90331-4 ↗
14. C.R. Cook, D.I. Yun, and W.H. Hunt, Jr.: Proc. Int. Symp. on Advances in Cast Reinforced Metal Composites, ASM, Metals Park, OH, 1988, pp. 195–204.
15. S.K. Verma and J.L. Dorcie: Proc. Int. Symp. on Advances in Cast Reinforced Metal Composites, ASM, Metals Park, OH, 1988, pp. 115–26.
16. J.F. Herbst: Rev. Mod. Phys., 1991, vol. 63 (4), pp. 819–72.10.1103/RevModPhys.63.819 ↗
17. J.F. Herbst, J.J. Croat, and W.B. Yelon: J. Appl. Phys., 1985, vol. 57 (17), pp. 4086–90.10.1063/1.334680 ↗
18. V. Panchanathan: J. Mater. Eng. Performance, 1995, vol. 4 (4), pp. 423–29.10.1007/BF02649302 ↗
19. N.C. Ku, C.-D. Qin, C.C. Yu, and D.H.L. Ngs: IEEE Trans. Magn., 1996, vol. 32 (5), pp. 4407–09.10.1109/20.538884 ↗
20. C.W. Cheng, H.C. Man, and F.T. Cheng: IEEE Trans. Magn., 1997, vol. 33 (5), 3910–12.10.1109/20.619612 ↗
21. T. Minowa, M. Yoshikawa, and M. Honshima: IEEE Trans. Magn., 1998, vol. 25 (5), pp. 3776–78.10.1109/20.42430 ↗
22. S.A. Attanasio and R.M. Latanision: Mater. Sci. Eng. A, 1995, vol. A198, pp. 25–34.10.1016/0921-5093(95)80055-Y ↗
23. H.H. Man, H.C. Man, and L.K. Leung: J. Magn. Mater., 1996, vol. 152, pp. 40–46.10.1016/0304-8853(95)00453-X ↗