journal article·2024-11Open access

Eutectic Solidification Morphologies in Rapidly Solidified Hypereutectic Sn–Ag Solder Alloy

Huamao Rao, Andrew Mullis, Robert Cochrane

Abstract

Abstract The effect of rapid solidification upon hypereutectic Sn–Ag solder alloy has been investigated using a 6.5 m drop tube. Powder sizes ranging from > 850 to < 38 μm were produced, with equivalent cooling rates of 250 to 14,800 K s−1 for 850 and 38 μm droplets, respectively. At all cooling rates investigated, dendritic β-Sn was observed as the primary solidification phase, not proeutectic Ag3Sn as predicted by the phase diagram. The volume fraction of interdendritic eutectic was observed to decrease with increasing cooling rate, with the Ag concentration in the residual interdendritic liquid estimated at 12.5–15 wt pct Ag, far in excess of the eutectic concentration of 3.8 wt pct. Much of the Ag3Sn observed within the eutectic had a blocky, divorced eutectic appearance. A model is proposed which can explain these observations in terms of sluggish nucleation of the Ag3Sn intermetallic, coupled with a metastable phase diagram that permits significant supersaturation of Ag at modest undercooling.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. H. Tanaka: Espec technology report 2002, vol. 14.
2. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R, 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
3. H. Jones and W. Kurz: Metall. Trans. A, 1980, vol. 11A, pp. 1265–73.10.1007/BF02653480 ↗
4. M.H. Burden and J.D. Hunt: J. Cryst. Growth, 1974, vol. 22, pp. 328–30.10.1016/0022-0248(74)90178-X ↗
5. W. Kurz and D.J. Fisher: Int. Metals Rev., 1979, vol. 24, pp. 177–204.
6. G.A. Chadwick: Prog. Mater. Sci., 1965, vol. 12, pp. 99–182.10.1016/0079-6425(63)90037-9 ↗
7. M. Rappaz and J. A. Dantzing: In solidification, EPFL Press: 2009, pp 381–89.
8. M. Tassa and J.D. Hunt: J. Cryst. Growth, 1976, vol. 34, pp. 38–48.10.1016/0022-0248(76)90260-8 ↗
9. K. Jackson: Liquid Metals and Solidification, Cleveland, ASM, 1958, pp. 174–274.
10. R.S. Fidler, M.N. Croker, and R.W. Smith: J. Cryst. Growth, 1972, vol. 13(14), pp. 739–46.10.1016/0022-0248(72)90552-0 ↗
11. M.N. Croker, R.S. Fidler, and R.W. Smith: J. Cryst. Growth, 1971, vol. 11, pp. 121–30.10.1016/0022-0248(71)90175-8 ↗
12. M.N. Croker, D. Baragar, and R.W. Smith: J. Cryst. Growth, 1975, vol. 30, pp. 198–212.10.1016/0022-0248(75)90090-1 ↗
13. M.N. Croker, M. McParlan, D. Baragar, and R.W. Smith: J. Cryst. Growth, 1975, vol. 29, pp. 85–97.10.1016/0022-0248(75)90055-X ↗
14. M.R. Taylor, R.S. Fidler, and R.W. Smith: J. Cryst. Growth, 1968, vol. 3–4, pp. 238–43.
15. R. Elliott: Eutectic Solidification Processing: Crystalline and Glassy Alloys, Elsevier, New York, 2013.
16. U. Böyük and N. Maraşli: Mater. Chem. Phys., 2010, vol. 119, pp. 442–48.10.1016/j.matchemphys.2009.09.022 ↗
17. D.K. Mukhopadhyay, C. Suryanarayana, and F.H. Froes: Metall. and Mater. Trans. A., 1995, vol. 26A, pp. 1939–46.10.1007/BF02670665 ↗
18. G. Li, E. Brodu, J. Soete, H. Wei, T. Liu, T. Yang, W. Liao, and K. Vanmeensel: Addit. Manuf., 2021, vol. 47, 102210.
19. X. Wang, L. Yang, H. Tan, F. Yu, and J. Cui: Int. J. Cast Met. Res., 2022, vol. 35, pp. 131–38.10.1080/13640461.2022.2146918 ↗
20. V. Bathula, C. Liu, K. Zweiacker, J. McKeown, and J.M. Wiezorek: Acta Mater., 2020, vol. 195, pp. 341–57.10.1016/j.actamat.2020.04.006 ↗
21. H. Wang, Y. An, X. Xu, X. Guo, and Y. Hu: Mater Charact, 2020, vol. 170, 110703.10.1016/j.matchar.2020.110703 ↗
22. Y. An, X. Xu, L. Liang, Y. Zhao, and H. Hou: J. Alloys Compd., 2021, vol. 864, p. 158821.10.1016/j.jallcom.2021.158821 ↗
23. Y. An, L. Liang, X. Xu, Y. Zhao, and H. Hou: J. Market. Res., 2021, vol. 11, pp. 548–63.
24. X. Xu, C. Tang, H. Wang, Y. An, and Y. Zhao: J. Mater. Sci. Technol., 2022, vol. 128, pp. 160–79.10.1016/j.jmst.2022.04.025 ↗
25. M.R. Abul, R.F. Cochrane, and A.M. Mullis: J. Mater. Sci. Technol., 2022, vol. 104, pp. 41–51.10.1016/j.jmst.2021.05.085 ↗
26. X. Qi, N. Takata, A. Suzuki, M. Kobashi, and M. Kato: Addit. Manuf., 2020, vol. 35, 101308.
27. H.H. Lien, J. Mazumder, J. Wang, and A. Misra: Mater. Res. Lett., 2020, vol. 8, pp. 291–98.10.1080/21663831.2020.1755380 ↗
28. B. Wei, W. Wu, D. Xie, H.H. Lien, M. Kayitmazbatir, A. Misra, and J. Wang: Mater. Res. Lett., 2021, vol. 9, pp. 507–15.10.1080/21663831.2021.1987346 ↗
29. F. Ochoa, J.J. Williams, and N. Chawla: JOM, 2003, vol. 55, pp. 56–60.10.1007/s11837-003-0142-7 ↗
30. K.S. Kim, S.H. Huh, and K. Suganuma: Mater. Sci. Eng. A, 2002, vol. 333, pp. 106–14.10.1016/S0921-5093(01)01828-7 ↗
31. J.F. Bromley, F. Vnuk, and R.W. Smith: J. Mater. Sci., 1983, vol. 18, pp. 3143–53.10.1007/BF00700799 ↗
32. M. Şahin and E. Çadirli: J. Mater. Sci., 2012, vol. 23, pp. 484–92.
33. R.S. Sidhu and N. Chawla: Mater Charact, 2004, vol. 52, pp. 225–30.10.1016/j.matchar.2004.04.010 ↗
34. X. Liu, M. Huang, Y. Zhao, C.M.L. Wu, and L. Wang: J. Alloys Compd., 2010, vol. 492, pp. 433–38.10.1016/j.jallcom.2009.11.131 ↗
35. D.W. Henderson, T. Gosselin, A. Sarkhel, S.K. Kang, W.K. Choi, and D.Y. Shih: J. Mater. Res., 2002, vol. 17, pp. 2775–78.10.1557/JMR.2002.0402 ↗
36. R.W. Cahn and P. Haasen: Physical Metallurgy, Elsevier, New York, 1996, pp. 767–68.
37. C.J. Lin, L. Peng, J.W. Xian, Q. Li, and C.M. Gourlay: J. Alloys Compd., 2023, vol. 938, 168571.10.1016/j.jallcom.2022.168571 ↗
38. J.H. Kang, J. Park, K. Song, C.S. Oh, O. Shchyglo, and I. Steinbach: J. Magnes. Alloys, 2022, vol. 10, pp. 1672–79.10.1016/j.jma.2021.04.014 ↗
39. J. Baral, S. Das, and R. Sarvesha: Metallogr. Microstruct. Anal., 2022, vol. 11, pp. 245–54.10.1007/s13632-022-00853-y ↗
40. G. Du, F. Liu, and J.B. Li: Mater. Lett., 2020, vol. 265, 127406.10.1016/j.matlet.2020.127406 ↗
41. H. Liao, Y. Wu, H. Chen, and L. Qian: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 2346–50.10.1007/s11661-022-06699-x ↗
42. K.A. Jackson and J.D. Hunt: Dynamics of Curved Fronts, Elsevier, New York, 1988, pp. 363–76.10.1016/B978-0-08-092523-3.50040-X ↗
43. M. Erol and U. Büyük: Trans. Indian Inst. Met., 2016, vol. 69, pp. 961–70.10.1007/s12666-015-0592-y ↗
44. O. Oloyede, T.D. Bigg, R.F. Cochrane, and A.M. Mullis: Mater. Sci. Eng. A, 2016, vol. 654, pp. 143–50.10.1016/j.msea.2015.12.020 ↗
45. R.H. Davies, A.T. Dinsdale, J.A. Gisby, J.A.J. Robinson, and S.M. Martin: Calphad, 2002, vol. 26, pp. 229–71.10.1016/S0364-5916(02)00036-6 ↗
46. N. Hou: Imperial College London: 2019, pp 77–81.
47. A. Moore and R. Elliot: The Solidification of Metals, The Iron and Steel Institute, London, 1968, pp. 167–72.
48. E.S. Lee and S. Ahn: Acta Metall. Mater., 1994, vol. 42, pp. 3231–43.10.1016/0956-7151(94)90421-9 ↗
49. J. Lipton, W. Kurz, and R. Trivedi: Acta Metall., 1987, vol. 35, pp. 957–64.10.1016/0001-6160(87)90174-X ↗
50. G.E. Nash and M.E. Glicksman: Acta Metall., 1974, vol. 22, pp. 1283–90.10.1016/0001-6160(74)90141-2 ↗
51. D.A. Kessler, J. Koplik, and H. Levine: Phys. Rev. A, 1985, vol. 31, p. 1712.10.1103/PhysRevA.31.1712 ↗
52. P. Magnin and W. Kurz: Acta Metall., 1987, vol. 35, pp. 1119–28.10.1016/0001-6160(87)90059-9 ↗
53. N. Hou, J.W. Xian, A. Sugiyama, H. Yasuda, and C.M. Gourlay: Metall. Mater. Trans. A, 2023, vol. 54A, pp. 909–27.10.1007/s11661-022-06937-2 ↗
54. G. Kasperovich, T. Volkmann, L. Ratke, and D. Herlach: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2826–36.
55. J. Shen, Y.C. Chan, and S.Y. Liu: Intermetallics, 2008, vol. 16, pp. 1142–48.10.1016/j.intermet.2008.06.016 ↗
56. S.K. Seo, S.K. Kang, D.Y. Shih, and H.M. Lee: J. Electron. Mater., 2009, vol. 38, pp. 718–25.10.1007/s11664-008-0584-3 ↗
57. Y. Cui, J.W. Xian, A. Zois, K. Marquardt, H. Yasuda, and C.M. Gourlay: Acta Mater., 2023, vol. 249, pp. 157–68.10.1016/j.actamat.2023.118831 ↗
58. H. Yu, Y. Sun, W.R. Meier, P.C. Canfield, C.R. Weinberger, S.W. Lee, and M. Aindow: J. Mater. Sci., 2018, vol. 53, pp. 12828–36.10.1007/s10853-018-2581-0 ↗
59. J. Pacio and T. Wetzel: Sol. Energy, 2013, vol. 93, pp. 280–94.10.1016/j.solener.2013.03.025 ↗
60. F. Meydaneri and B. Saatçi: Arab. J. Sci. Eng., 2014, vol. 39, pp. 8027–36.10.1007/s13369-014-1125-4 ↗
61. E. Çadırlı, M. Şahin, R. Kayalı, M. ArI, and S. Durmuş: J. Mater. Sci., 2011, vol. 22, pp. 1411–21.
62. F. Meydaneri, B. Saatçi, and M. Özdemir: Kovove Materialy, 2013, vol. 51, pp. 305–12.
63. P.J. Shamberger, Y. Mizuno, and A.A. Talapatra: J. Appl. Phys., 2017, vol. 122, 215301.10.1063/1.4990984 ↗
64. C. Morando, O. Fornaro, O. Garbellini, and H. Palacio: J. Mater. Sci., 2014, vol. 25, pp. 2824–34.
65. E. Çadırlı, U. Böyük, S. Engin, H. Kaya, N. Maraşlı, K. Keşlioğlu, and A. Ülgen: J. Mater. Sci., 2010, vol. 21, pp. 72–79.
66. E. Çadirli, U. Böyük, S. Engin, H. Kaya, N. Maraşli, and A. Ülgen: J. Alloys Compd., 2009, vol. 486, pp. 199–206.10.1016/j.jallcom.2009.07.027 ↗
67. H. Kaya, E. Çadirli, and M. Gündüz: J. Mater. Eng. Perform., 2003, vol. 12, pp. 417–23.