journal article·2024-06Open access

Effects of Shot Sleeve Pre-solidification on the Microstructure and Tensile Properties of High Pressure Die Cast AE44

Wenhao Yu, Hongyi Zhan, Christopher M. Gourlay

Abstract

Abstract In cold-chamber high pressure die casting (HPDC), some pre-solidification occurs in the shot sleeve prior to being injected into the die cavity. Here, we study the effects of pre-solidification on the development of microstructure and defects in the HPDC of magnesium alloy AE44 (Mg–4Al–4RE–0.2Mn, wt pct, where RE are mixed La and Ce) and on subsequent tensile properties. Samples with a high fraction of pre-solidification contained both externally solidified crystals (ESCs) and cold flakes, which also induced large pockets of positive macrosegregation. Variations in the morphology and length scale of$$\alpha$$-Mg grains and eutectic Al$$11$$RE$$3$$are discussed in terms of the different cooling conditions for each microstructural feature using a grain morphology map for$$\alpha$$-Mg. A high fraction of pre-solidification resulted in a small decrease in yield stress due to the larger microstructural length scale, and a substantial decrease in ultimate tensile strength and ductility due to the presence of a non-bonded interface between cold flakes and the surrounding material. The results provide insights into microstructure formation in the HPDC of AE44 and highlight the importance of controlling the extent of pre-solidification that is injected into the die cavity.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (79)

Show source-provided references
1. M.K. Kulekci: Int. J. Adv. Manuf. Technol., 2008, vol. 39, pp. 851–65.10.1007/s00170-007-1279-2 ↗
2. A.A. Luo: J. Mag. Alloys, 2013, vol. 1(1), pp. 2–22.10.1016/j.jma.2013.02.002 ↗
3. W.P. Sequeira, G. L. Dunlop, and M.T. Murray: Proceedings of the Third International Magnesium Conference, 1996, pp. 63–73.
4. A.L. Bowles, J.R. Griffiths, and C.J. Davidson: Mag. Technol., 2001, vol. 2001, pp. 161–68.
5. T. Liang, C.E. Mobley, and N. Tsumagari: Die Casting Congress & Exposition, 2002.
6. H.I. Laukli, O. Lohne, S. Sannes, H. Gjestland, and L. Arnberg: Int. J. Cast Met. Res., 2003, vol. 16(6), pp. 515–21.10.1080/13640461.2003.11819629 ↗
7. C.M. Gourlay, H.I. Laukli, and A.K. Dahle: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1833–44.10.1007/s11661-007-9243-1 ↗
8. W. Sun, X. Shi, E. Cinkilic, and A.A. Luo: J. Mater. Sci., 2016, vol. 51, pp. 6287–94.10.1007/s10853-016-9925-4 ↗
9. T. Le, Q. Wei, J. Wang, P. Jin, M. Chen, and J. Ma: Mater. Res. Express, 2020, vol. 7(11), p. 116513.10.1088/2053-1591/abc721 ↗
10. Y. Xia, J. Zheng, J. Chen, Y. Zhang, R. Shi, H. Zhou, et al.: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 2274–86.10.1007/s11661-021-06220-w ↗
11. T.T. Zhang, W.B. Yu, C.S. Ma, W.T. Chen, L. Zhang, and S.M. Xiong: J. Mag. Alloys, 2023, vol. 11(9), pp. 3141–50.10.1016/j.jma.2022.05.001 ↗
12. W.G. Walkington and D.M. Murray: Die Casting Defects: Causes and Solutions, 2015, pp. 147–50.
13. L. Wang, T. Nguyen, G. Savage, and C. Davidson: Int. J. Cast Met. Res., 2003, vol. 16(4), pp. 409–17.10.1080/13640461.2003.11819617 ↗
14. A. Bowles, K. Nogita, M. Dargusch, C. Davidson, and J. Griffiths: Mater. Trans., 2004, vol. 45(11), pp. 3114–19.10.2320/matertrans.45.3114 ↗
15. X.B. Li, S.M. Xiong, and Z.P. Guo: Mater. Sci. Eng. A, 2015, vol. 633, pp. 35–41.10.1016/j.msea.2015.02.078 ↗
16. K. Dou, Y. Zhang, E. Lordan, A. Jacot, and Z. Fan: Metall. Mater. Trans. A, 2022, vol. 53A(8), pp. 3110–24.10.1007/s11661-022-06731-0 ↗
17. H. Cao and M. Wessén: Int. J. Cast Met. Res., 2005, vol. 18(6), pp. 377–84.10.1179/136404605225023216 ↗
18. B.S. Wang and S.M. Xiong: Trans. Non-ferrous Met. Soc. China, 2011, vol. 21(4), pp. 767–72.10.1016/S1003-6326(11)60778-4 ↗
19. M.W. Wu, X.B. Li, Z.P. Guo, and S.M. Xiong: China Foundry, 2018, vol. 15(2), pp. 139–45.10.1007/s41230-018-7242-z ↗
20. A.K.M. Ahamed, H. Kato, K. Kageyama, and T. Komazaki: Mater. Sci. Eng. A, 2006, vol. 423(1–2), pp. 313–23.10.1016/j.msea.2006.02.042 ↗
21. C. Mobley, Y. Sahai, J. Brevick: The Ohio State University (US), unpublished research, 2003.
22. T. Komazaki, Y. Maruyama, and N. Nishi: Imono, 1995, vol. 67(4), pp. 258–64.
23. A.K.M. Ahamed and H. Kato: Int. J. Cast Met. Res., 2008, vol. 21(1–4), pp. 162–67.10.1179/136404608X361882 ↗
24. A. Kopper, A.K. Monroe: 2015 Die Casting Congress & Exposition, NADCA Transactions, 2015.
25. P. Paliani, L. Zalewski, J. Barreto, N. Tsumagari, J. Brevick, C. Mobley: NADCA Proceedings, 1995, pp. 149–55.
26. M. Gershenzon, P. Rohan, M. T. Murray: NADCA Transactions, 1999.
27. M. Okayasu, S. Wu, T. Hirayama, and Y.S. Lee: Int. J. Cast Met. Res., 2018, vol. 31(5), pp. 308–16.10.1080/13640461.2018.1470370 ↗
28. N. Tsumagari, T. Liang, J. Brevick, C.E. Mobley: Die Casting Congress & Exposition, NADCA Transactions, 2001, pp. 251–56.
29. D. R. Gunasegaram, M. Givord, R. O’Donnell, B. Finnin: NADCA Transactions, 2008.
30. P. Bakke, K. Pettersen, and H. Westengen: Mag. Technol., 2003, vol. 2003, pp. 171–76.
31. P. Bakke, H. Westengen: Magnesium Technology, 2005, pp. 313–18.
32. B.R. Powell, V. Rezhets, M.P. Balogh, and R.A. Waldo: Jom, 2002, vol. 54, pp. 34–38.10.1007/BF02711864 ↗
33. P. Bakke, H. Westengen, S. Sannes, D. Albright: SAE Technical Paper Series, 2004, 01(0655).
34. M. Pekguleryuz and M. Celikin: Int. Mater. Rev., 2010, vol. 55(4), pp. 197–217.10.1179/095066010X12646898728327 ↗
35. A.A. Luo: Magnesium Technology, 2000, vol. 2000, pp. 89–98.
36. S. Zhu, T.B. Abbott, J.F. Nie, H.Q. Ang, D. Qiu, K. Nogita, and M.A. Easton: J. Mag. Alloys, 2021, vol. 9(5), pp. 1537–45.10.1016/j.jma.2021.04.016 ↗
37. M.A. Easton, S. Zhu, T.B. Abbott, M. Dargusch, M. Murray, G. Savage, et al.: Adv. Eng. Mater., 2016, vol. 18(6), pp. 953–62.10.1002/adem.201500407 ↗
38. S. Zhu, M.A. Easton, T.B. Abbott, J.F. Nie, M.S. Dargusch, N. Hort, and M.A. Gibson: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 3543–54.10.1007/s11661-015-2946-9 ↗
39. Y. Jiao, J. Zhang, L. He, M. Zhang, F. Jiang, W. Wang, et al.: Adv. Eng. Mater., 2016, vol. 18(1), pp. 148–55.10.1002/adem.201500226 ↗
40. S. Fan, X. Wang, G.G. Wang, J.P. Weiler: IntechOpen, 2023.
41. Y. Li, J. Wang, H. Ma, Z. Zhen, Y. Liu, H. Zhang, and P. Jin: Mater. Res. Express, 2022, vol. 9(2), p. 020005.10.1088/2053-1591/ac5354 ↗
42. T.M. Schwarz, W. Yu, H. Zhan, B. Gault, C.M. Gourlay, and I. McCarroll: Scripta Mater., 2023, vol. 232, p. 115498.10.1016/j.scriptamat.2023.115498 ↗
43. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, and A. Cardona: Nat. Methods, 2012, vol. 9(7), pp. 676–82.10.1038/nmeth.2019 ↗
44. C.H. Cáceres, J.R. Griffiths, A.R. Pakdel, and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402(1–2), pp. 258–68.10.1016/j.msea.2005.04.042 ↗
45. X. Li, S.M. Xiong, and Z. Guo: Mater. Sci. Eng. A, 2016, vol. 500, pp. 216–25.10.1016/j.msea.2016.07.009 ↗
46. A.K. Dahle, Y.C. Lee, M.D. Nave, P.L. Schaffer, and D.H. StJohn: J. Light. Met., 2001, vol. 1(1), pp. 61–72.10.1016/S1471-5317(00)00007-9 ↗
47. H.I. Laukli, C.M. Gourlay, A.K. Dahle, and O. Lohne: Mater. Sci. Eng. A, 2005, vol. 413, pp. 92–97.10.1016/j.msea.2005.08.194 ↗
48. T.Z. Kattamis: Trans. Metall. Soc. AIME, 1967, vol. 239, pp. 1504–11.
49. M.C. Flemings: Metall. Mater. Trans. B, 1974, pp 246–48.
50. K. Pettersen, O. Lohne, and N. Ryum: Metall. Trans. A, 1990, vol. 21, pp. 221–30.10.1007/BF02656439 ↗
51. D. Dubé, A. Couture, Y. Carbonneau, M. Fiset, R. Angers, and R. Tremblay: Int. J. Cast Met. Res., 1998, vol. 11(3), pp. 139–44.10.1080/13640461.1998.11819268 ↗
52. S.J. Norris, I.M. Brooks, G. De Leeuw, A. Sirevaag, C. Leck, B.J. Brooks, et al.: Ocean Sci., 2011, vol. 7(1), pp. 129–39.10.5194/os-7-129-2011 ↗
53. M. Easton, C. Davidson, and D. StJohn: Mater. Trans., 2011, vol. 52(5), pp. 842–47.10.2320/matertrans.L-MZ201118 ↗
54. C.J. Lin, L. Peng, J.W. Xian, Q. Li, and C.M. Gourlay: J. Alloys Compd., 2023, vol. 938, p. 168571.10.1016/j.jallcom.2022.168571 ↗
55. E. Tzimas and A. Zavaliangos: Mater. Sci. Eng. A, 2000, vol. 289(1–2), pp. 217–27.10.1016/S0921-5093(00)00907-2 ↗
56. H. Ishida, Y. Natsume, and K. Ohsasa: ISIJ Int., 2009, vol. 49(1), pp. 37–43.10.2355/isijinternational.49.37 ↗
57. K. Ohsasa, Y. Natsume, T. Sekiya, and T. Hatayama: IOP Conf. Ser., 2015, vol. 84(1), p. 012033.10.1088/1757-899X/84/1/012033 ↗
58. Z.P. Guo, S.M. Xiong, B.C. Liu, M. Li, and J. Allison: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2896–2905.10.1007/s11661-008-9640-0 ↗
59. K. Dou, E. Lordan, Y.J. Zhang, A. Jacot, and Z.Y. Fan: J. Manuf. Process., 2020, vol. 60, pp. 435–46.10.1016/j.jmapro.2020.10.062 ↗
60. E. Lordan, Y. Zhang, K. Dou, A. Jacot, C. Tzileroglou, S. Wang, et al.: Metals, 2022, vol. 12(10), p. 1575.10.3390/met12101575 ↗
61. W.B. Yu, S. Liang, Y.Y. Cao, X.B. Li, Z.P. Guo, and S.M. Xiong: China Foundry, 2017, vol. 14, pp. 258–64.10.1007/s41230-017-6066-6 ↗
62. R. Helenius and O. Lohne: Int. J. Metalcast., 2015, vol. 9, pp. 51–59.10.1007/BF03355615 ↗
63. M.C. Flemings: Mater. Trans., 2005, vol. 46(5), pp. 895–900.10.2320/matertrans.46.895 ↗
64. R.A. Martinez, A. Karma, and M.C. Flemings: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2807–15.10.1007/BF02586113 ↗
65. G.I. Eskin, D.G. Eskin: in Proceedings of the 12th International Conference on Aluminium Alloys, 2010, pp. 683–45.
66. G. Pettersen, H. Westengen, R. Hϕier, and O. Lohne: Mater. Sci. Eng. A, 1996, vol. 207(1), pp. 115–20.10.1016/0921-5093(95)10035-0 ↗
67. T. Rzychoń, A. Kielbus, J. Cwajna, and J. Mizera: Mater Charact, 2009, vol. 60(10), pp. 1107–13.10.1016/j.matchar.2009.05.014 ↗
68. S. Zhu, C. Wong, M.J. Styles, T.B. Abbott, J.F. Nie, and M.A. Easton: Mater Charact, 2019, vol. 156, p. 109839.10.1016/j.matchar.2019.109839 ↗
69. Z. Cao, G. Kong, C. Che, Y. Wang, and H. Peng: J. Rare Earths, 2017, vol. 35(10), pp. 1022–28.10.1016/S1002-0721(17)61008-1 ↗
70. Y. Guo, J. Hu, Q. Han, B. Sun, J. Wang, and C. Liu: J. Alloys Compd., 2022, vol. 899, p. 162914.10.1016/j.jallcom.2021.162914 ↗
71. Q. Wei, H. Wang, J. Li, X. Quan, W. Li, and B. Wang: J. Alloys Compd., 2023, vol. 960, p. 170878.10.1016/j.jallcom.2023.170878 ↗
72. S.M. Zhu, T.B. Abbott, M.A. Gibson, J.F. Nie, and M.A. Easton: Mater. Sci. Eng. A, 2016, vol. 656, pp. 34–38.10.1016/j.msea.2016.01.012 ↗
73. S.M. Zhu, T.B. Abbott, M.A. Gibson, J.F. Nie, and M.A. Easton: Mater. Sci. Eng. A, 2017, vol. 682, pp. 535–41.10.1016/j.msea.2016.11.075 ↗
74. C.H. Caceres and B.I. Selling: Mater. Sci. Eng. A, 1996, vol. 220(1–2), pp. 109–16.10.1016/S0921-5093(96)10433-0 ↗
75. A.M. Gokhale and G.R. Patel: Mater Charact, 2005, vol. 54(1), pp. 13–20.10.1016/j.matchar.2004.10.003 ↗
76. S.G. Lee, G.R. Patel, A.M. Gokhale, A. Sreeranganathan, and M.F. Horstemeyer: Mater. Sci. Eng. A, 2006, vol. 427(1–2), pp. 255–62.10.1016/j.msea.2006.04.108 ↗
77. X. Teng, H. Mae, Y. Bai, and T. Wierzbicki: Eng. Fract. Mech., 2009, vol. 76(8), pp. 983–96.10.1016/j.engfracmech.2009.01.001 ↗
78. C.M. Laursen, S.A. DeJong, S.M. Dickens, A.N. Exil, D.F. Susan, and J.D. Carroll: Mater. Sci. Eng. A, 2020, vol. 795, p. 139922.10.1016/j.msea.2020.139922 ↗
79. E. Lordan, J. Lazaro-Nebreda, Y. Zhang, K. Dou, P. Blake, and Z. Fan: Mater. Sci. Eng. A, 2020, vol. 778, p. 139107.10.1016/j.msea.2020.139107 ↗