journal article·2022-10

B/Ti Atomic Ratio and Al Content on Microstructure and Properties of New Neutron Absorbing Austenitic Stainless-Steel Composites

Jie Pan, Chun-Dong Wang, Ying-Hui Tao, Jun Li, Qi-Liang Mei, Qian-Xue Ding, Zhao-Yu Wu, Xue-Shan Xiao

Publisher page

Abstract

A new type of austenitic stainless-steel composite with different B/Ti atomic ratios and Al contents have been fabricated by in situ synthesis techniques. The effects of the B/Ti atomic ratio and Al content on the microstructure and properties of the composites were investigated. All the designed composites with high B content (2.0 to 2.5 wt pct) had excellent hot workability. The new composite was mainly composed of austenite matrix, long strip-shaped (Fe,Cr)2B boride and a tremendous amount of dispersedly distributed TiB2 particles after hot rolling and annealing. The total elongation and ultimate tensile strength of the composite with a B/Ti atomic ratio of 1.77 were 9.12 pct and 758 MPa, respectively, and this positive result was mainly due to the formation of TiB2 particles avoiding the network distribution of (Fe,Cr)2B boride. The corrosion resistance in boric acid solution and shielding properties were also evaluated, and these austenitic stainless-steel composites are expected to be outstanding materials for neutron absorption. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fusion materials and technologies · Nuclear Materials and Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. E.A. Loria and H.S. Isaacs: J. Met., 1980, vol. 32, pp. 10–17.
2. S.E. Soliman, D.L. Youchison, A.J. Baratta, and T.A. Balliett: Nucl. Technol., 2017, vol. 96, pp. 346–52.10.13182/NT91-A34595 ↗
3. C.V. Robino and M.J. Cieslak: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1673–85.10.1007/BF02670754 ↗
4. M. Bastürk, J. Arztmann, W. Jerlich, N. Kardjilov, E. Lehmann, and M. Zawisky: J. Nucl. Mater., 2005, vol. 341, pp. 189–200.10.1016/j.jnucmat.2005.02.003 ↗
5. F. Xue, Z.F. Luo, W.W. Yu, Z.X. Wang, and L. Zhang: Adv. Mat. Res., 2011, vol. 197, pp. 1520–23.
6. J. Do, C. Jeon, C. Paul Kim, B. Lee, S. Lee, E. Lee, T. Shik Yoon, and Y. Su Shin: Mater. Sci. Eng. A, 2012, vol. 556, pp. 366–72.10.1016/j.msea.2012.06.100 ↗
7. J. Do, H. Lee, C. Jeon, D.J. Ha, C.P. Kim, B. Lee, S. Lee, and Y.S. Shin: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 2237–50.10.1007/s11661-012-1086-8 ↗
8. H. Fu, Z. Li, Z. Jiang, and J. Xing: Mater. Lett., 2007, vol. 61, pp. 4504–07.10.1016/j.matlet.2007.02.037 ↗
9. G.R. Kumar, G.D.J. Ram, and S.R.K. Rao: Mater. Technol., 2016, vol. 50, pp. 357–64.
10. C. Guo and P.M. Kelly: Mater. Sci. Eng. A, 2003, vol. 352, pp. 40–45.10.1016/S0921-5093(02)00449-5 ↗
11. X. Zhou, M. Wang, and H. Zhao: J. Alloys Compd., 2016, vol. 665, pp. 100–06.10.1016/j.jallcom.2015.11.115 ↗
12. J. Li, Y. Cai, K.R. Narayanan, A. Lucero, A. Pilipetskii, and C.N. Georghiades: J. Lightwave Technol., 2004, vol. 22, pp. 640–46.10.1109/JLT.2003.821766 ↗
13. J. Moon, J.H. Jang, S. Kim, T. Lee, H. Ha, C. Lee, and H. Hong: Mater. Charact., 2020, vol. 164, p. 110319.10.1016/j.matchar.2020.110319 ↗
14. Z.J. Wang, Y.W. Li, G.D. Wang, and H.T. Liu: Mater. Sci. Eng. A, 2020, vol. 793, p. 139847.10.1016/j.msea.2020.139847 ↗
15. A.Y. Churyumov, A.V. Pozdniakov, B. Mondoloni, and A.S. Prosviryakov: Results Phys., 2019, vol. 13, p. 102340.10.1016/j.rinp.2019.102340 ↗
16. S. Hahn, S. Isserow, and R. Ray: J. Mater. Sci., 1987, vol. 22, pp. 3395–3401.10.1007/BF01161211 ↗
17. X. Zhou, M. Wang, Y. Fu, Z. Wang, Y. Li, S. Yang, H. Zhao, and H. Li: Mater. Charact., 2017, vol. 124, pp. 182–91.10.1016/j.matchar.2017.01.001 ↗
18. J.A. Jiménez, G. González-Doncel, and O.A. Ruano: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1861–67.10.1007/BF02651935 ↗
19. Y.W. Li, G.J. Liu, Z.J. Wang, B.G. Zhang, X.M. Zhang, and H.T. Liu: J. Iron Steel Res. Int., 2019, vol. 90, p. 1800491.10.1002/srin.201800491 ↗
20. J. Liu, K. Zhang, and G.L. Xie: Adv. Mat. Res., 2012, vol. 535–537, pp. 883–87.
21. H. Fu, Q. Xiao, J. Kuang, Z. Jiang, and J. Xing: Mater. Sci. Eng. A, 2007, vol. 466, pp. 160–65.10.1016/j.msea.2007.02.032 ↗
22. Z.l. Liu, X. Chen, Y.X. Li and K.H. Hu: J. Iron Steel Res. Int., 2009, vol. 16, pp. 37–42,5410.1016/S1006-706X(09)60041-8 ↗
23. X. Yong, C. Zhiguo, W. Xiang, and W. Zhongjia: Rare Met. Mat. Eng., 2015, vol. 44, pp. 1335–39.10.1016/S1875-5372(15)30085-0 ↗
24. S. Ma, J. Xing, H. Fu, Y. Gao, and J. Zhang: Acta Mater., 2012, vol. 60, pp. 831–43.10.1016/j.actamat.2011.11.004 ↗
25. G.B. Raju and B. Basu: Key Eng. Mater., 2008, vol. 395, pp. 89–124.10.4028/www.scientific.net/KEM.395.89 ↗
26. Y. Liu, B.H. Li, J. Li, L. He, S.J. Gao, and T.G. Nieh: Mater. Lett., 2010, vol. 64, pp. 1299–301.10.1016/j.matlet.2010.03.013 ↗
27. X. Zheng, Y. Liu, and J. Li: Int. J. Mater. Prod. Technol., 2015, vol. 51, pp. 332–44.10.1504/IJMPT.2015.072559 ↗
28. G. Xu, K. Wang, X. Dong, L. Yang, H. Jiang, Q. Wang, and W. Ding: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 4610–22.10.1007/s11661-020-05899-7 ↗
29. A. Prosviryakov, B. Mondoloni, A. Churyumov, and A. Pozdniakov: Metals, 2019, vol. 9, p. 218.10.3390/met9020218 ↗
30. J. Pan, Z. Wang, L. Yang, Q. Mei, Q. Ding, Z. Wu, and X. Xiao: Mater. Charact., 2021, vol. 181, p. 111446.10.1016/j.matchar.2021.111446 ↗
31. N. Kokan: Trans. Iron Steel Inst. Jpn., 1988, vol. 28, p. 600.10.2355/isijinternational1966.28.600 ↗
32. P. Cizek, B.A. Parker, M. Bijok, and P. Zuna: ISIJ Int., 1994, vol. 34, pp. 679–88.10.2355/isijinternational.34.679 ↗
33. GB/T 228.1-2010, Standardization Administration of China, People's Republic of China, 2010.10.1142/9789814313513_0001 ↗
34. Q. Wang, Y. Li, S. Chen, X. Liu, Z. Chen, M. Wang, H. Zhu, and H. Wang: J. Phys. Chem. C, 2021, vol. 125, pp. 5937–46.10.1021/acs.jpcc.1c00371 ↗
35. S. Ma, W. Pan, J. Xing, S. Guo, H. Fu, and P. Lyu: Mater. Charact., 2017, vol. 132, pp. 1–9.10.1016/j.matchar.2017.08.001 ↗
36. X. Ren, H. Fu, J. Xing, and S. Tang: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5636–45.10.1007/s11661-018-4861-3 ↗
37. Y.J. Li, Q.C. Jiang, Y.G. Zhao, and Z.M. He: Scr. Mater., 1997, vol. 37, pp. 173–77.10.1016/S1359-6462(97)00088-2 ↗
38. Z.J. Wang, Y.W. Li, W.N. Zhang, G.D. Wang, and H.T. Liu: Mater. Sci. Eng. A, 2021, vol. 811, p. 141067.10.1016/j.msea.2021.141067 ↗
39. L.L. Yuan, J.T. Han, and J. Liu: Adv. Mat. Res., 2014, vol. 941–944, pp. 226–31.
40. S. Ma, J. Xing, G. Liu, D. Yi, H. Fu, J. Zhang, and Y. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6800–808.10.1016/j.msea.2010.07.066 ↗
41. J. Lentz, A. Röttger, F. Großwendt, and W. Theisen: Mater. Des., 2018, vol. 156, pp. 113–24.10.1016/j.matdes.2018.06.040 ↗
42. A. Röttger, J. Lentz, and W. Theisen: Mater. Des., 2015, vol. 88, pp. 420–29.10.1016/j.matdes.2015.08.157 ↗
43. M. ZiemnickaSylwester, L. Gai, and S. Miura: Mater. Des., 2015, vol. 69, pp. 1–1.10.1016/j.matdes.2014.12.036 ↗
44. V. Raghavan: J. Phase Equilib., 2003, vol. 24, pp. 455–56.10.1361/105497103770330145 ↗
45. D. Ye and J. Hu: Handbook of Practical Inorganic Thermodynamic Data, Metallurgical Industry Press, Beijing, 2002.
46. Y. Li, H. Liu, Z. Wang, Z. Zhang, and W. Li: Rare Met., 2019, vol. 39, pp. 1483–91.10.1007/s12598-019-01247-w ↗
47. C.H. Chen, Y. Bai, W. Chen, and X.C. Ye: Appl. Mech. Mater., 2013, vol. 395–396, pp. 251–58.
48. J. Diabb, A. JuárezHernandez, R. Colas, A.G. Castillo, E. GarcíaSanchez, and M.A.L. HernandezRodriguez: Wear, 2009, vol. 267, pp. 550–55.10.1016/j.wear.2008.12.046 ↗
49. B. Wang, H. Yi, and G. Wang: Acta Metall. Sin., 2019, vol. 55, pp. 133–40.
50. B.G. Wang, G.D. Wang, R.D.K. Misra, and H.L. Yi: Mater. Sci. Eng. A, 2021, vol. 812, 141100.10.1016/j.msea.2021.141100 ↗
51. A. Ma and M. Jiang: Ceramics, 2006, pp. 19–21
52. Y.W. Li, Z.J. Wang, D.G. Fu, G. Li, H.T. Liu, and X.M. Zhang: Mater. Sci. Eng. A, 2021, vol. 799, p. 140212.10.1016/j.msea.2020.140212 ↗
53. C.H. Won, J.H. Jang, S.D. Kim, J. Moon, and H.Y. Ha: J. Nucl. Mater., 2019, vol. 515, pp. 206–14.10.1016/j.jnucmat.2018.12.039 ↗
54. L. He, Y. Liu, J. Li, and B. Li: Mater. Des., 2012, vol. 36, pp. 88–93.10.1016/j.matdes.2011.10.043 ↗
55. S. Hahn, S. lssrow, and R. Ray: J. Mater. Sci., 1985, vol. 4, pp. 972–75.
56. H.B.M. Rajan, I. Dinaharan, S. Ramabalan, and E.T. Akinlabi: J. Alloys Compd., 2016, vol. 657, pp. 250–60.10.1016/j.jallcom.2015.10.108 ↗
57. Z. HadjemHamouche, K. Derrien, E. Héripré, and J.P. Chevalier: Mater. Sci. Eng. A, 2018, vol. 724, pp. 594–605.10.1016/j.msea.2018.03.108 ↗
58. M.X. Huang, B.B. He, X. Wang, and H.L. Yi: Scr. Mater., 2015, vol. 99, pp. 13–16.10.1016/j.scriptamat.2014.11.015 ↗
59. Y.Z. Li, Z.C. Luo, H.L. Yi, and M.X. Huang: Metall. Mater. Trans. E, 2016, vol. 3, pp. 203–08.
60. Z. Hadjem-Hamouche, J.-P. Chevalier, Y. Cui, and F. Bonnet: J. Iron Steel Res. Int., 2012, vol. 83, pp. 538–45.10.1002/srin.201100255 ↗
61. S. Hafez, S. ElKameesy, M. Eissa, R. Elshazly, M. Elfawkhry, and A. Saed: Arab. J. Nucl. Sci. Appl., 2019, vol. 52, pp. 36–44.
62. S. Hafez, R. Elshazly, M.M. Eissa, and S. El-Kameesy: Arab. J. Nucl. Sci. Appl., 2021, vol. 54, pp. 97–104.
63. R. Sharma, A.K. Singh, A. Arora, S. Pati, and P.S. De: T. Nonferrous Met. Soc., 2019, vol. 29, pp. 1383–92.10.1016/S1003-6326(19)65045-4 ↗
64. H.S. Chen, W.X. Wang, Y.L. Li, P. Zhang, H.H. Nie, and Q.C. Wu: J. Alloys Compd., 2015, vol. 632, pp. 23–29.10.1016/j.jallcom.2015.01.048 ↗
65. P. Zhang, Y. Li, W. Wang, Z. Gao, and B. Wang: J. Nucl. Mater., 2013, vol. 437, pp. 350–58.10.1016/j.jnucmat.2013.02.050 ↗
66. H. Mutuk, T. Mutuk, H. Gümüş, and B. Mesci Oktay: Acta Phys. Pol. A, 2016, vol. 130, pp. 172–74.10.12693/APhysPolA.130.172 ↗
67. Z.G. Xu, L.T. Jiang, Q. Zhang, J. Qiao, D. Gong, and G.H. Wu: Mater. Des., 2016, vol. 111, pp. 375–81.10.1016/j.matdes.2016.07.140 ↗