journal article·2021-01

Hydrogen-Assisted Cracking Behavior of Ni Alloy 718: Microstructure, H Testing Protocol, and Fractography

Dhinakaran Sampath, Gideon Obasi, Roberto Morana, Robert Akid

Publisher page

Abstract

Hydrogen-assisted cracking (HAC) behavior of peak-aged, as-received material of aerospace-grade, and over-aged, based on the API 6ACRA-718 standard, microstructural variants of Ni alloy 718 was studied using slow strain rate test (SSRT) under in-situ hydrogen (H) environment. The effect of cooling rate post solution annealing (SA) treatment on HAC susceptibility was also examined. The influence of H testing protocols with and without H pre-charging on HAC susceptibility was evaluated. The link between microstructural features and HAC fracture features was established using advanced electron microscopy. The results suggest that the microstructural variant of alloy 718, with sufficient initial ductility and clean grain boundaries, may be suitable for service applications in H environments. The over-aged variant obtained by air cooling post SA and followed by aging at 774 °C for 6 hours exhibited better HAC resistance due to the presence of δ phase sporadically decorated along the GBs. The slower cooling rates post SA increased HAC susceptibility. The yield strength of the over-aged variants aged at 802 °C for 8 hours, regardless of SA cooling rates, was lower than the minimum requirement expected by the API standard, and the HAC susceptibility was severe exhibiting intergranular fracture due to continuous decoration of δ phase along the GBs. The peak-aged variant demonstrated severe HAC susceptibility showing transgranular fracture. HAC susceptibility of all variants was greater for SSRT of non-H pre-charged specimens under in-situ H environment at 20 °C than at 80 °C. H pre-charging enhanced the HAC susceptibility further when tested at 20 °C and the role of microstructure was largely suppressed. HAC susceptibility was manifested as both transgranular and intergranular fracture modes depending on the slip localization activity and H availability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (91)

Show source-provided references
1. S.S. Shademan, J.W. Martin, and A.P. Davis: NACE International, Salt Lake City, Utah, 2012.
2. R. Morana and V.C.M. Smith: NACE Int. Corros. 2015, 2015, pp. 1–13.
3. P. Nice, G. Rorvik, R. Strong, J.H. Olsen, W.M. Bailey, and T.G. Mobberley: in Corrosion 2014, NACE International, San Antonio, TX, 2014, p. 3892.
4. P.I. Nice, R. Morana, C. Sviluppo, and S. Materiali: in NACE Corrosion 2013, NACE International, Orlando, Florida, 2013.
5. V.C.M. Smith, R. Morana, G. Hinds, N. McClelland, A. Bishop, and P. Dent: NACE International, Dallas, Texas, 2015, pp. 1–15.
6. S.J. Kernion, K.A. Heck, J.H. Magee, and T.N. Werley: Corrosion, 2015, pp. 1–12.
7. S.J. Kernion, J.H. Magee, T. Werley, and P. Maxwell: in Offshore Technology Conference, OnePetro, Houston, TX, 2014, p. OTC-25177-MS.
8. 8 J.J. Debarbadillo and S.K. Mannan: Jom, 2012, vol. 64, pp. 265–70.10.1007/s11837-012-0238-z ↗
9. R.P. Gangloff: in Comprehensive structural integrity, I. Milne, R.O. Ritchie, B. Karihaloo, J. Petit, and P. Scott, eds., Elsevier Science, New York, NY, 2003, pp. 31–101.
10. API Stand. 6A718 Third Ed., 2013, pp. 1–34.
11. Rashimi, B., Bhavsar, P E., Collins, A., Silverma, S.: Superalloys 718, 625, 706 Var. Deriv., 2001, pp. 47–55.10.7449/2001/Superalloys_2001_47_55 ↗
12. B. Kagay, K. Findley, S. Coryell, and A.B. Nissan: Mater. Sci. Technol., 2016, vol. 32, pp. 697–707.10.1080/02670836.2016.1139225 ↗
13. R. Morana, L. Smith, and S.P. Venkateswaran: in Corrosion Conference & Expo 2019, NACE International, Nashville, TX, 2019, pp. 1–15.
14. P.D. Hicks and C.J. Altstetter: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS, 1991, pp. 635–51.10.7449/1991/Superalloys_1991_635_651 ↗
15. Z. Zhang, G. Obasi, R. Morana, and M. Preuss: Acta Mater., 2016, vol. 113, pp. 272–83.10.1016/j.actamat.2016.05.003 ↗
16. G.C. Obasi, Z. Zhang, D. Sampath, R. Morana, R. Akid, and M. Preuss: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1167–81.10.1007/s11661-018-4483-9 ↗
17. Z.D. Harris, J.D. Dolph, G.L. Pioszak, B.C.R. Troconis, J.R. Scully, and J.T. Burns: Metall. Mater. Trans. A, pp. 11–3.
18. B.C. Rincon Troconis, Z.D. Harris, H. Ha, J.T. Burns, and J.R. Scully: Mater. Sci. Eng. A, 2017, vol. 703, pp. 533–50.10.1016/j.msea.2017.07.019 ↗
19. R.J. Coyle, J.A. Kargol, and N.F. Fiore: Metall. Trans. A, 1981, vol. 12, pp. 653–8.10.1007/BF02649740 ↗
20. T. Michler, J. Naumann, and M.P. Balogh: Mater. Sci. Eng. A, 2014, vol. 607, pp. 71–80.10.1016/j.msea.2014.03.134 ↗
21. S. Chen, M. Zhao, and L. Rong: Corros. Sci., 2015, vol. 101, pp. 75–83.10.1016/j.corsci.2015.09.003 ↗
22. J. Chêne and A.M. Brass: Scr. Mater., 1999, vol. 40, pp. 537–42.10.1016/S1359-6462(98)00451-5 ↗
23. Z. Tarzimoghadam, M. Rohwerder, S. V. Merzlikin, A. Bashir, L. Yedra, S. Eswara, D. Ponge, and D. Raabe: Acta Mater., 2016, vol. 109, pp. 69–81.10.1016/j.actamat.2016.02.053 ↗
24. L. Liu, K. Tanaka, A. Hirose, and K.F. Kobayashi: Sci. Technol. Adv. Mater., 2002, vol. 3, pp. 335–44.10.1016/S1468-6996(02)00039-6 ↗
25. L. Foroni and C. Malara: in Corrosion 2014, NACE International, San Antonio,TX, 2014, pp. 1–15.
26. M.C. Rezende, L.S. Araujo, S.B. Gabriel, D.S. Santos, and L.H. De Almeida: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 17075–83.10.1016/j.ijhydene.2015.07.053 ↗
27. A. Turnbull, R.G. Ballinger, I.S. Hwang, and M.M. Morra: Metall. Trans., 1992, vol. 23, pp. 3231–44.10.1007/BF02663432 ↗
28. Z. Zhang, K. Moore, G. McMahon, R. Morana, and M. Preuss: Corros. Sci., 2019, vol. 146, pp. 58–69.10.1016/j.corsci.2018.10.019 ↗
29. D.M. Symons: Eng. Fract. Mech., 2001, vol. 68, pp. 751–71.10.1016/S0013-7944(00)00123-5 ↗
30. Y. Ogawa, O. Takakuwa, S. Okazaki, K. Okita, and Y. Funakoshi: Corros. Sci., 2019, vol. 161, p. 108186.10.1016/j.corsci.2019.108186 ↗
31. R.G. Thompson, J.R. Dobbs, and D.E. Mayo: Weld. Res. Suppl., 1986.
32. A. Oradei-Basile and J.F. Radavich: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., The Minerals, Metals and Materials Society, Pittsburgh, Pennsylvania, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
33. X. Xie, C. Xu, G. Wang, J. Dong, W. Cao, and R. Kennedy: in Superalloys 718, 625, 706 and derivatives 2005, E.A. Loria, ed., The MInerals, Metals, Metals and Materials Scociety, 2005, pp. 193–202.10.7449/2005/Superalloys_2005_193_202 ↗
34. NACE International: TM0177-96, Laboratory Testing of Metals for Resistance to Sulfide Stress Cracking and Stress Corrosion Cracking in H2S Environments, NACE International, 1996.
35. BP Internal Report - BP Oil & Gas Exploration and Operating Company, Sunbury on Thames, U.K., 2014.
36. D. Sampath, R. Akid, and R. Morana: Eng. Fract. Mech., 2018, vol. 191, pp. 324–43.10.1016/j.engfracmech.2017.12.010 ↗
37. P.D. Hicks and C.J. Altstetter: Metall. Trans. A, 1992, vol. 23, pp. 237–49.10.1007/BF02660868 ↗
38. P.M. Mignanelli, N.G. Jones, E.J. Pickering, O.M.D.M. Messé, C.M.F. Rae, M.C. Hardy, and H.J. Stone: Scr. Mater., 2017, vol. 136, pp. 136–40.10.1016/j.scriptamat.2017.04.029 ↗
39. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–64.10.1016/0001-6160(88)90139-3 ↗
40. B.M.B. Grant, E.M. Francis, J. Quinta Da Fonseca, M.R. Daymond, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 6829–41.10.1016/j.actamat.2012.09.005 ↗
41. A. Devaux, L. Naz, R. Molins, A. Pineau, A. Organista, and J.F. Uginet: 2008, vol. 486, pp. 117–22.10.1016/j.msea.2007.08.046 ↗
42. S. Mahadevan and S. Nalawade: 7th Int. Symp. Superalloys 718 Deriv., 2010, pp. 737–50.10.1002/9781118495223.ch57 ↗
43. M. Jouiad, E. Marin, R.S. Devarapalli, J. Cormier, F. Ravaux, C. Le Gall, and J. Franchet: Mater. Des., 2016, vol. 102, pp. 284–96.10.1016/j.matdes.2016.04.048 ↗
44. D. Delafosse: in Gaseous hydrogen embrittlement of materials in energy technologies, R.P. Gangloff and B.P. Somerday, eds., Woodhead Publishing Limited, 2014, pp. 247–85.
45. J. Chêne and A.M. Brass: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2004, vol. 35 A, pp. 457–64.10.1007/s11661-004-0356-5 ↗
46. W. M. Robertson: Metall. Trans. A, 1977, vol. 8A, p. 1709.10.1007/BF02646873 ↗
47. L. Liu, C. Zhai, C. Lu, W. Ding, A. Hirose, and K.F. Kobayashi: Corros. Sci., 2005, vol. 47, pp. 355–67.10.1016/j.corsci.2004.06.008 ↗
48. D. Bika and C.J. McMahon: Acta Metall., 1995, vol. 43, pp. 1909–16.10.1016/0956-7151(94)00387-W ↗
49. A.W. Thompson: Metall. Trans. A, 1979, vol. 10, pp. 727–31.10.1007/BF02658394 ↗
50. S.P. Lynch: Scr. Metall., 1986, vol. 20, pp. 1067–72.10.1016/0036-9748(86)90438-2 ↗
51. S. Lynch: Corros. Rev., 2012, vol. 30, pp. 105–23.
52. N.R. Moody, R.E. Stoltz, and M.W. Perra: Metall. Trans. A, 1987, vol. 18, pp. 1469–82.10.1007/BF02646659 ↗
53. M. Ludwig, D. Farkas, M.I. Baskes, X. Sha, J.E. Angelo, and N.R. Moody: 1997, pp. 88–90.
54. P.J. Ferreira, I.M. Robertson, and H.K. Birnbaum: Acta Mater., 1998, vol. 46, pp. 1749–57.10.1016/S1359-6454(97)00349-2 ↗
55. Z. Tarzimoghadam, D. Ponge, J. Kloewer, and D. Raabe: in CORROSION 2016, NACE International, 2016.
56. A.M. Brass and J. Chene: Mater. Sci. Eng A, 1998, vol. 242, pp. 210–21.10.1016/S0921-5093(97)00523-6 ↗
57. T. Neeraj, R. Srinivasan, and J. Li: Acta Mater., 2012, vol. 60, pp. 5160–71.10.1016/j.actamat.2012.06.014 ↗
58. L. Fournier, D. Delafosse, and T. Magnin: Mater. Sci. Eng. A, 1999, vol. 269, pp. 111–9.10.1016/S0921-5093(99)00167-7 ↗
59. W.W. Gerberich, R.A. Oriani, M. Lii, X. Chen, and T. Foecke: Philos. Mag. A, 1991, vol. 63, pp. 363–76.10.1080/01418619108204854 ↗
60. H. Vehoff and H.-K. Klameth: Acta Metall., 1985, vol. 33, pp. 955–62.10.1016/0001-6160(85)90189-0 ↗
61. M. Seita, J.P. Hanson, S. Gradecak, and M.J. Demkowicz: Nat Commun, 2015, vol. 6, p. 6164.10.1038/ncomms7164 ↗
62. J.C. Stinville, N. Vanderesse, F. Bridier, P. Bocher, and T.M. Pollock: Acta Mater., 2015, vol. 98, pp. 29–42.10.1016/j.actamat.2015.07.016 ↗
63. J.J.M. Jebaraj, D.J. Morrison, and I.I. Suni: Corros. Sci., 2014, vol. 80, pp. 517–22.10.1016/j.corsci.2013.11.002 ↗
64. R.M. Latanision and M. Kurkela: Corrosion, 1983, vol. 39, pp. 174–81.10.5006/1.3580833 ↗
65. D.M. Symons: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1265–77.10.1007/s11661-998-0253-4 ↗
66. J.M. Zagal, H.F. López, O. Flores, J.L. Albarran, and L. Martínez: Corros. Sci., 2008, vol. 50, pp. 3371–7.10.1016/j.corsci.2008.08.042 ↗
67. H.K.D.H. Bhadeshia: ISIJ Int., 2016, vol. 56, pp. 24–36.10.2355/isijinternational.ISIJINT-2015-430 ↗
68. G.M. Pressouyre: Metall. Trans. A, 1979, vol. 10, pp. 1571–3.10.1007/BF02812023 ↗
69. A. Turnbull and M.W. Carroll: Corros. Sci., 1990, vol. 30, pp. 667–79.10.1016/0010-938X(90)90031-Y ↗
70. N.R. Moody, S.L. Robinson, S.M. Myers, and F.A. Greulich: Acta Metall., 1989, vol. 37, pp. 281–90.10.1016/0001-6160(89)90286-1 ↗
71. J.E. Angelo, S. Mater, and S. Eng: Model. Simul. Mater. Sci. Eng., 1995, vol. 3 289, p. 20.
72. J.H. Ai, H.M. Ha, R.P. Gangloff, and J.R. Scully: Acta Mater., 2013, vol. 61, pp. 3186–99.10.1016/j.actamat.2013.02.007 ↗
73. J.E. Angelo, N.R. Moody, and M.I. Baskes: Model. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 289–307.10.1088/0965-0393/3/3/001 ↗
74. Y. Sakamoto and A. Miura: The Diffusion and Trapping of Hydrogen in Cold Worked Nickel, 1979.
75. G.M. Pressouyre and I.M. Bernstein: Acta Metall., 1979, vol. 27, pp. 89–100.10.1016/0001-6160(79)90059-2 ↗
76. S. Lee and J. Lee: Metall. Trans. A, 1986, vol. 17A, pp. 181–7.10.1007/BF02643893 ↗
77. G.A. Young and J.R. Scully: Scr. Mater., 1997, vol. 36, pp. 713–9.10.1016/S1359-6462(96)00440-X ↗
78. A. Turnbull: Int. J. Hydrogen Energy, 2015, vol. 40, pp. 16961–70.10.1016/j.ijhydene.2015.06.147 ↗
79. D. Li, R.P. Gangloff, and J.R. Scully: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2004, vol. 35 A, pp. 849–64.10.1007/s11661-004-0011-1 ↗
80. H. K. Birnbaum and P. Sofronis: Mater. Sci ence Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
81. F. Galliano, E. Andrieu, C. Blanc, J. Cloue, D. Connetable, and G. Odemer: Mater Sci Eng A, 2014, vol. 611, pp. 370–82.10.1016/j.msea.2014.06.015 ↗
82. M.C. Chaturvedi and Y.-F. Han: Met. Sci., 1983, vol. 17, pp. 145–9.10.1179/030634583790421032 ↗
83. H.K. Birnbaum and P. Sofronis: Mater. Sci. Eng. A, 1994, vol. 176, pp. 191–202.10.1016/0921-5093(94)90975-X ↗
84. Y. Desvallees, M. Bouzidi, F. Bois, and N. Beaude: in Superalloys 718, 625, 706 and various derivatives, E.A. Loria, ed., TMS, 1994, pp. 281–91.10.7449/1994/Superalloys_1994_281_291 ↗
85. J.R. Scully, H.R. Dogan, D.R. Li, and R.P. Gangloff: Corros. 2004, 2004, vol. 63, pp. 7–8.
86. E. Martínez-pañeda, Z.D. Harris, S. Fuentes-alonso, J.R. Scully, and J.T. Burns: Corros. Sci., 2020, vol. 163, p. 108291.10.1016/j.corsci.2019.108291 ↗
87. D. Martelo, D. Sampath, A. Monici, R. Morana, and R. Akid: Eng. Fract. Mech., 2019, vol. 221, p. 106678.10.1016/j.engfracmech.2019.106678 ↗
88. M. Wang, E. Akiyama, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 398, pp. 37–46.10.1016/j.msea.2005.03.008 ↗
89. M.M. Hall: in Gaseous Hydrogen Embrittlement of Materials in Energy Technologies: Mechanisms, Modelling and Future Developments, Woodhead Publishing Limited, 2012, pp. 378–429.10.1533/9780857095374.2.378 ↗
90. D. Martelo, R. Akid, and R. Morana: in BP-ICAM Project - Annual Report, BP-ICAM, University of Manchester, Manchester, UK, 2018, pp. 1–31.
91. G.M. Pressouyre: Acta Metall., 1980, vol. 28, pp. 895–911.10.1016/0001-6160(80)90106-6 ↗