Evolution of Complex Oxide Inclusions During the Smelting Process of Oxide Metallurgical Steel and Their Effect on Acicular Ferrite Nucleation
Source abstract
Abstract
By sampling the important nodes in the smelting process of oxide metallurgical steel, the evolution of number density, size and type of complex oxide inclusions, and the effect of inclusions on prior austenite grain size and acicular ferrite (AF) nucleation were studied. The sampling nodes are before ladle furnace (LF) refining, add Ti, add Al, add Mg, add Ca, after Ruhrstahl-Heraeus (RH) refining, respectively. The results show that with the addition of TiAlMgCa, the core of inclusion gradually becomes Al2O3, Al–Ti–O, Al–Ti–Mg–O, Al–Ti–Mg–Ca–O, and a small amount of MnS is wrapped in the outer layer. After RH refining, the core of inclusion is Al–Mg–Ca–O, and a small amount of Ti–O–N and Al–Mg–O are enriched in the outer layer. These inclusions effectively induced AF nucleation. As the smelting process progresses, the average size of inclusions gradually decreases from 0.55 to 0.2 μm, and the number density and percentage of small size inclusions (0.1 to 0.2 μm) gradually increase. After RH refining, the nucleation probability of AF (NAF) of small size inclusions is 7.8 pct, and the NAF of inclusions in the range of 0.4 to 0.8 μm is greater than 70 pct. The small size inclusions are an important part of inducing AF nucleation, which can also effectively pin the prior austenite grain boundaries, and the larger the proportion of small size inclusions, the finer the prior austenite grains.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. X. Luo, G. Xu, X. Chen, and Z. Wang: Mater. Sci. Eng. A, 2022, vol. 833, p. 142571 https://doi.org/10.1016/j.msea.2021.142571.10.1016/j.msea.2021.142571 ↗
2. H. Deng, Z. Liu, X. Wang, J. Ma, F. Han, and Z. Wang: Mater. Today Commun., 2022, vol. 33, p. 104407 https://doi.org/10.1016/j.mtcomm.2022.104407.10.1016/j.mtcomm.2022.104407 ↗
3. W. Guo, Y. Cai, B. Wang, W. Mu, and D. Xin: Mater. Sci. Eng. A, 2022, vol. 830, p. 142240 https://doi.org/10.1016/j.msea.2021.142240.10.1016/j.msea.2021.142240 ↗
4. X. Li, X. Ma, S.V. Subramanian, C. Shang, and R.D.K. Misra: Mater. Sci. Eng. A, 2014, vol. 616, pp. 141–47. https://doi.org/10.1016/j.msea.2014.07.100.10.1016/j.msea.2014.07.100 ↗
5. W.-H. Choi, S.-K. Cho, K.W.-K. Choi, and J.-M. Han: J. Korean Weld. Join. Soc., 2012, vol. 30, pp. 64–71. https://doi.org/10.5781/kwjs.2012.30.1.64.10.5781/kwjs.2012.30.1.64 ↗
6. Z. Xiong, S. Liu, X. Wang, C. Shang, and R.D.K. Misra: Mater Charact, 2015, vol. 106, pp. 232–39. https://doi.org/10.1016/j.matchar.2015.06.001.10.1016/j.matchar.2015.06.001 ↗
7. S.J. Lv, H.H. Wu, K.Y. Wang, S.Z. Wang, G.L. Wu, J.H. Gao, X.S. Yang, J.M. Zhu, and X.P. Mao: Comput. Mater. Sci., 2023, vol. 218, p. 111989 https://doi.org/10.1016/j.commatsci.2022.111989.10.1016/j.commatsci.2022.111989 ↗
8. W.L. Costin, O. Lavigne, and A. Kotousov: Mater. Sci. Eng. A, 2016, vol. 663, pp. 193–203. https://doi.org/10.1016/j.msea.2016.03.103.10.1016/j.msea.2016.03.103 ↗
9. H. Zhao, B.P. Wynne, and E.J. Palmiere: J. Mater. Sci., 2018, vol. 53, pp. 3785–3804. https://doi.org/10.1007/s10853-017-1781-3.10.1007/s10853-017-1781-3 ↗
10. H.S. Kim, M. Jo, J.Y. Park, B.J. Kim, H.C. Kim, D. Nam, B. Kim, and Y.S. Ahn: Mater. Sci. Eng. A, 2022, vol. 857, p. 144125 https://doi.org/10.1016/j.msea.2022.144125.10.1016/j.msea.2022.144125 ↗
11. Y. Shao, C. Liu, Z. Yan, H. Li, and Y. Liu: J. Mater. Sci. Technol., 2018, vol. 34, pp. 737–44. https://doi.org/10.1016/j.jmst.2017.11.020.10.1016/j.jmst.2017.11.020 ↗
12. Y. Kang, S. Jeong, J.H. Kang, and C. Lee: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 2842–54. https://doi.org/10.1007/s11661-016-3456-0.10.1007/s11661-016-3456-0 ↗
13. J.H. Shim, Y.W. Cho, S.H. Chung, J.D. Shim, and D.N. Lee: Acta Mater., 1999, vol. 47, pp. 2751–60. https://doi.org/10.1016/S1359-6454(99)00114-7.10.1016/S1359-6454(99)00114-7 ↗
14. Z. Zhang and R.A. Farrar: Mater. Sci. Technol., 1996, vol. 12, pp. 237–60. https://doi.org/10.1179/mst.1996.12.3.237.10.1179/mst.1996.12.3.237 ↗
15. C. Xuan and W. Mu: Mater. Des., 2022, vol. 221, p. 110892 https://doi.org/10.1016/j.matdes.2022.110892.10.1016/j.matdes.2022.110892 ↗
16. J.H. Shim, Y.J. Oh, J.Y. Suh, Y.W. Cho, J.D. Shim, J.S. Byun, and D.N. Lee: Acta Mater., 2001, vol. 49, pp. 2115–22. https://doi.org/10.1016/S1359-6454(01)00134-3.10.1016/S1359-6454(01)00134-3 ↗
17. J.H. Shim, J.S. Byun, Y.W. Cho, Y.J. Oh, J.D. Shim, and D.N. Lee: Scripta Mater., 2001, vol. 44, pp. 49–54. https://doi.org/10.1016/S1359-6462(00)00560-1.10.1016/S1359-6462(00)00560-1 ↗
18. T. Furuhara, T. Shinyoshi, G. Miyamoto, J. Yamaguchi, N. Sugita, N. Kimura, N. Takemura, and T. Maki: ISIJ Int., 2003, vol. 43, pp. 2028–37. https://doi.org/10.2355/isijinternational.43.2028.10.2355/isijinternational.43.2028 ↗
19. Y. Morikage, K. Oi, F. Kawabata, and K. Amano: Tetsu-To-Hagane/J. Iron Steel Inst. Jpn, 1998, vol. 84, pp. 510–15. https://doi.org/10.2355/tetsutohagane1955.84.7_510.10.2355/tetsutohagane1955.84.7_510 ↗
20. H.H. Jin, J.H. Shim, Y.W. Cho, and H.C. Lee: ISIJ Int., 2003, vol. 43, pp. 1111–13. https://doi.org/10.2355/isijinternational.43.1111.10.2355/isijinternational.43.1111 ↗
21. Ø. Grong, A.O. Kluken, H.K. Nylund, A.L. Dons, and J. Hjelen: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 525–34. https://doi.org/10.1007/BF02663903.10.1007/BF02663903 ↗
22. S. Zhang, N. Hattori, M. Enomoto, and T. Tarui: ISIJ Int., 1996, vol. 36, pp. 1301–09. https://doi.org/10.2355/isijinternational.36.1301.10.2355/isijinternational.36.1301 ↗
23. B. Zhou, G. Li, X. Wan, Y. Li, and K. Wu: Met. Mater. Int., 2016, vol. 22, pp. 267–75. https://doi.org/10.1007/s12540-016-5301-9.10.1007/s12540-016-5301-9 ↗
24. F.C. Liu, J.W. Li, Q. Wang, Y.D. Liu, Y. Bai, T. He, and G. Yuan: Mater. Sci. Eng. A, 2021, vol. 824, p. 141795 https://doi.org/10.1016/j.msea.2021.141795.10.1016/j.msea.2021.141795 ↗
25. H.K. Sung, S.S. Sohn, S.Y. Shin, K.S. Oh, and S. Lee: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 3036–50. https://doi.org/10.1007/s11661-014-2240-2.10.1007/s11661-014-2240-2 ↗
26. M.M. Song, B. Song, S.H. Zhang, Z.L. Xue, Z.B. Yang, and R.S. Xu: ISIJ Int., 2017, vol. 57, pp. 1261–67. https://doi.org/10.2355/isijinternational.ISIJINT-2017-037.10.2355/isijinternational.ISIJINT-2017-037 ↗
27. C.R. Manuel, M.R. Marcos, A.H.T. Martín, S.M. Rodolfo, C.U. Fabián, and M.E. Arturo: J. Mater. Res. Technol., 2022, vol. 21, pp. 3870–84. https://doi.org/10.1016/j.jmrt.2022.10.105.10.1016/j.jmrt.2022.10.105 ↗
28. G. Xu: J. Steel, 2006, vol. 2, pp. 12–15. https://doi.org/10.3969/j.issn.1002-1043.2006.01.005.10.3969/j.issn.1002-1043.2006.01.005 ↗
29. F.J. Li, H.G. Li, D. Huang, S.B. Zheng, and J.L. You: Met. Mater. Int., 2018, vol. 24, pp. 1394–1402. https://doi.org/10.1007/s12540-018-0141-4.10.1007/s12540-018-0141-4 ↗
30. J.S. Seo, K.H. Kim, H.J. Kim, and C. Lee: Weld. World, 2013, vol. 57, pp. 65–72. https://doi.org/10.1007/s40194-012-0009-z.10.1007/s40194-012-0009-z ↗
31. W. Liu, M. Li, S. Yang, Z. Xu, C. Huang, T. Liu, and J. Li: J. Mater. Res. Technol., 2022, vol. 18, pp. 990–97. https://doi.org/10.1016/j.jmrt.2022.03.014.10.1016/j.jmrt.2022.03.014 ↗
32. P.J. Chen, C.Y. Zhu, G.Q. Li, Y.W. Dong, and Z.C. Zhang: ISIJ Int., 2017, vol. 57, pp. 1019–28. https://doi.org/10.2355/isijinternational.ISIJINT-2017-007.10.2355/isijinternational.ISIJINT-2017-007 ↗
33. T.K. Lee, H.J. Kim, B.Y. Kang, and S.K. Hwang: ISIJ Int., 2000, vol. 40, pp. 1260–68. https://doi.org/10.2355/isijinternational.40.1260.10.2355/isijinternational.40.1260 ↗
34. F. Liu, Q. Wang, J. Li, Y. Liu, T. He, and G. Yuan: Mater Charact, 2021, vol. 181, p. 111503 https://doi.org/10.1016/j.matchar.2021.111503.10.1016/j.matchar.2021.111503 ↗
35. O. Grong, L. Kolbeinsen, C. van der Eijk, and G. Tranell: ISIJ Int., 2006, vol. 46, pp. 824–31. https://doi.org/10.2355/isijinternational.46.824.10.2355/isijinternational.46.824 ↗
36. J.L. Lee: Acta Metall. Mater., 1994, vol. 42, pp. 3291–98. https://doi.org/10.1016/0956-7151(94)90461-8.10.1016/0956-7151(94)90461-8 ↗
37. F.J. Barbaro, P. Krauklis, and K.E. Easterling: Mater. Sci. Technol., 1989, vol. 5, pp. 1057–68. https://doi.org/10.1179/mst.1989.5.11.1057.10.1179/mst.1989.5.11.1057 ↗
38. D.S. Sarma, A.V. Karasev, and P.G. Jonsson: ISIJ Int., 2009, vol. 49, pp. 1063–74. https://doi.org/10.2355/isijinternational.49.1063.10.2355/isijinternational.49.1063 ↗
39. T. Pan, Z. Yang, B. Bai, and H. Fang: Acta Metall. Sin., 2003, vol. 39, pp. 1037–42. https://www.ams.org.cn/CN/Y2003/V39/I10/1037.
40. M. Lee, N. Kang, S. Liu, and K. Cho: Sci. Technol. Weld. Join., 2016, vol. 21, pp. 711–19. https://doi.org/10.1080/13621718.2016.1178833.10.1080/13621718.2016.1178833 ↗
41. L. Lan, C. Qiu, and L. Du: Theor. Appl. Fract. Mech., 2023, vol. 124, p. 103762 https://doi.org/10.1016/j.tafmec.2023.103762.10.1016/j.tafmec.2023.103762 ↗
42. H. Zhao and E.J. Palmiere: Mater Charact, 2018, vol. 145, pp. 479–89. https://doi.org/10.1016/j.matchar.2018.09.013.10.1016/j.matchar.2018.09.013 ↗
43. C.K. Lin, Y.H. Su, W.S. Hwang, G.R. Lin, and J.C. Kuo: Mater. Sci. Technol., 2018, vol. 34, pp. 596–606. https://doi.org/10.1080/02670836.2017.1421037.10.1080/02670836.2017.1421037 ↗