High Strain Rate Superplastic Flow and Fracture Characteristics of a Fine-Grained Eutectic High Entropy Alloy
Source abstract
Abstract
A fine-grained micro-duplex AlCoCrFeNi2.1 eutectic high entropy alloy exhibited high strain rate superplasticity with an elongation to failure of ~ 960 pct at 1173 K and a strain rate of 10-1 s-1. Optimum superplasticity was associated with a strain rate sensitivity of ~ 0.5, and there were transitions to non-superplastic flow with strain rate sensitivities of < 0.5 at both low and high strain rates. Superplasticity is attributed to grain boundary sliding with the observed retention of an equiaxed grain morphology, with some grain growth. Cavities with dimensions in the range of 1 to 5 μm were observed in specimens pulled to failure. Although analysis revealed that cavity nucleation is likely under the experimental conditions, cavity growth was slow because of control by a plasticity growth rate that was proportional to the cavity size. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6(5), pp. 299–303.10.1002/adem.200300567 ↗
2. J.W. Yeh, S.J. Lin, T.S. Chin, J.Y. Gan, S.K. Chen, T.T. Shun, C.H. Tsau, and S.Y. Chou: Metall. Mater. Trans. A, 2004, vol. 35(8), pp. 2533–36.10.1007/s11661-006-0234-4 ↗
3. J.W. Yeh: Ann. Chim. Sci. Mater., 2006, vol. 31(6), pp. 633–48.10.3166/acsm.31.633-648 ↗
4. B. Cantor, I.T.H. Chang, P. Knight, and A.J.B. Vincent: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 213–18.10.1016/j.msea.2003.10.257 ↗
5. B.S. Murty, J.W. Yeh, and S. Ranganathan: High-Entropy Alloys, Ist Butterworth-Heinemann, London, UK, 2014.
6. Y. Zhang, T.T. Zuo, Z. Tang, M.C. Gao, K.A. Dahmen, P.K. Liaw, and Z.P. Lu: Prog. Mater. Sci., 2004, vol. 61, pp. 1–93.10.1016/j.pmatsci.2013.10.001 ↗
7. D.B. Miracle and O.N. Senkov: Acta Mater., 2017, vol. 122, pp. 448–511.10.1016/j.actamat.2016.08.081 ↗
8. Y. Lu, Y. Dong, S. Guo, L. Jiang, H. Kang, T. Wang, B. Wen, Z. Wang, J. Jie, Z. Cao, H. Ruan, and T. Li: Sci. Rep., 2014, vol. 4, p. 6200.10.1038/srep06200 ↗
9. Z. Ding, Q. He, and Y. Yang: Sci. China Technol. Sci., 2018, vol. 61, pp. 159–67.10.1007/s11431-017-9051-6 ↗
10. I.S. Wani, T. Bhattacharjee, S. Sheikh, Y.P. Lu, S. Chatterjee, P.P. Bhattacharjee, S. Guo, and N. Tsuji: Mater. Res. Lett., 2016, vol. 4(3), pp. 174–79.10.1080/21663831.2016.1160451 ↗
11. I.S. Wani, T. Bhattacharjee, S. Sheikh, P.P. Bhattacharjee, S. Guo, and N. Tsuji: Mater. Sci. Eng. A, 2016, vol. 675(Supplement C), pp. 99–109.10.1016/j.msea.2016.08.048 ↗
12. T. Bhattacharjee, R. Zheng, Y. Chong, S. Sheikh, S. Guo, I.T. Clark, T. Okawa, I.S. Wani, P.P. Bhattacharjee, A. Shibata, and N. Tsuji: Mater. Chem. Phys., 2017, vol. 210, pp. 207–12.10.1016/j.matchemphys.2017.06.023 ↗
13. T. Bhattacharjee, I.S. Wani, S. Sheikh, I.T. Clark, T. Okawa, S. Guo, P.P. Bhattacharjee, N. Tsuji: Sci. Rep. 2018, vol. 8(1), p. 3276.10.1038/s41598-018-21385-y ↗
14. Y. Zhang, X. Wang, J. Li, Y. Huang, Y. Lu, and X. Sun: Mater. Sci. Eng. A, 2018, vol. 724, pp. 148–55.10.1016/j.msea.2018.03.078 ↗
15. M. Rahul, S. Samal, S. Venugopal, and G. Phanikumar: J. Alloys Compd., 2018, vol. 749, pp. 1115–27.10.1016/j.jallcom.2018.03.262 ↗
16. A.H. Chokshi, A.K. Mukherjee, and T.G. Langdon: Mater. Sci. Eng. R, 1993, vol. 10(6), pp. 237–74.10.1016/0927-796X(93)90009-R ↗
17. R. Gifkins and T. Langdon: Mater. Sci. Eng., 1978, vol. 36(1), pp. 27–33.10.1016/0025-5416(78)90192-1 ↗
18. A.K. Mukherjee: Superplasticity in Metals, Ist ed., Ceramics and Intermetallics, Germany: VCH Verlagsges, Weinheim, Germany, 2016.
19. K.A. Padmanabhan, G.J. Davies: Superplasticity: mechanical and structural aspects, environmental effects, fundamentals and applications, Springer Science & Business Media, Berlin, Germany, 2012.
20. K. Higashi, M. Mabuchi, and T.G. Langdon: ISIJ Int., 1996, vol. 36(12), pp. 1423–38.10.2355/isijinternational.36.1423 ↗
21. A.H. Chokshi: Mater. Chem. Phys., 2018, vol. 210, pp. 152–61.10.1016/j.matchemphys.2017.07.079 ↗
22. H. Shahmir, J. He, Z. Lu, M. Kawasaki, and T.G. Langdon: Mater. Sci. Eng. A, 2017, vol. 685, pp. 342–48.10.1016/j.msea.2017.01.016 ↗
23. S.R. Reddy, S. Bapari, P.P. Bhattacharjee, and A.H. Chokshi: Mater. Res. Lett., 2017, vol. 5(6), pp. 408–14.10.1080/21663831.2017.1305460 ↗
24. A.V. Kuznetsov, D.G. Shaisultanov, N.D. Stepanov, G.A. Salishchev, O.N. Senkov: Mater. Sci. Forum, Trans. Tech. Publ., 2013, pp. 146–51.10.4028/www.scientific.net/MSF.735.146 ↗
25. H. Shahmir, M. Nili-Ahmadabadi, A. Shafiee, and T.G. Langdon: Mater. Sci. Eng. A, 2018, vol. 718, pp. 468–76.10.1016/j.msea.2018.02.002 ↗
26. R.K. Nutor, R. Wei, Q. Cao, X. Wang, S. Ding, D. Zhang, F. Li, J.Z. Jiang: APL Mater., 2022, vol. 10(11), p. 111103.10.1063/5.0113926 ↗
27. N.T.C. Nguyen, P. Asghari-Rad, H. Park, and H.S. Kim: J. Mater. Sci., 2022, vol. 57(38), pp. 18154–8167.10.1007/s10853-022-07616-8 ↗
28. R. Motallebi, Z. Savaedi, H. Mirzadeh: Arch. Civ. Mech. Eng., 2022, vol. 22(1), p. 20.10.1007/s43452-021-00344-x ↗
29. P.K. Tripathi, Y.C. Chiu, S. Bhowmick, Y.C. Lo: Nanomaterials, 2021, vol. 11(8), p. 2111.10.3390/nano11082111 ↗
30. N.T.C. Nguyen, P. Asghari-Rad, P. Sathiyamoorthi, A. Zargaran, C.S. Lee, H.S. Kim: Nat. Commun. 2020, vol. 11(1), p. 2736.10.1038/s41467-020-16601-1 ↗
31. S.S. Nene, K. Liu, S. Sinha, M. Frank, S. Williams, and R.S. Mishra: Materials, 2020, vol. 9, p. 100521.
32. F.A. Mohamed: Adv. Eng. Mater., 2020, vol. 22(1), p. 1900532.10.1002/adem.201900532 ↗
33. H. Shahmir, M. Kawasaki, T.G. Langdon: 10th International Conference on Processing and Manufacturing of Advanced Materials, 2018, Trans. Tech. Publ., 2018, pp. 1059-1064.10.4028/www.scientific.net/MSF.941.1059 ↗
34. H. Zhang, J. Cai, J. Geng, X. Sun, Y. Zhao, X. Guo, and D. Li: Int. J. Refract. Met. Hard Mater., 2023, vol. 112, p. 106163.10.1016/j.ijrmhm.2023.106163 ↗
35. A.V. Kuznetsov, D.G. Shaysultanov, N.D. Stepanov, G.A. Salishchev, O.N. Senkov: 11th International Conference on Superplasticity in Advanced Materials, ICSAM 2012, Trans. Tech. Publ., 2013, pp. 146–51.10.4028/www.scientific.net/MSF.735.146 ↗
36. D.G. Shaysultanov, N.D. Stepanov, A.V. Kuznetsov, G.A. Salishchev, and O.N. Senkov: JOM, 2013, vol. 65(12), pp. 1815–28.10.1007/s11837-013-0754-5 ↗
37. A.V. Kuznetsov, D.G. Shaysultanov, N.D. Stepanov, G.A. Salishchev, and O.N. Senkov: Mater. Sci. Eng. A, 2012, vol. 533, pp. 107–18.10.1016/j.msea.2011.11.045 ↗
38. A.H. Chokshi: Adv. Eng. Mater., 2020, vol. 22(1), p. 1900748.10.1002/adem.201900748 ↗
39. Y. Jia, S. Wu, Y. Mu, L. Xu, C. Ren, K. Sun, J. Yi, Y. Jia, W. Yan, G. Wang: Adv. Sci. 2023, vol. 10(12), p. 2207535.10.1002/advs.202207535 ↗
40. H. Shahmir, M.S. Mehranpour, M. Kawasaki, and T.G. Langdon: Mater. Trans., 2023, vol. 64(7), pp. 1526–36.10.2320/matertrans.MT-MF2022008 ↗
41. N.T.C. Nguyen, P. Asghari-Rad, A. Zargaran, E.S. Kim, P. Sathiyamoorthi, and H.S. Kim: Scr. Mater., 2022, vol. 221, p. 114949.10.1016/j.scriptamat.2022.114949 ↗
42. I.S. Wani, T. Bhattacharjee, S. Sheikh, Y. Lu, S. Chatterjee, S. Guo, P.P. Bhattacharjee, and N. Tsuji: IOP Conf. Ser. Mater. Sci. Eng., 2017, vol. 194, p. 012018.10.1088/1757-899X/194/1/012018 ↗
43. X. Duan, T. Han, X. Guan, Y. Wang, H. Su, K. Ming, J. Wang, and S. Zheng: J. Mater. Sci. Technol., 2023, vol. 136, pp. 97–108.10.1016/j.jmst.2022.07.023 ↗
44. T.S. Kumar, A. Sourav, S. Yebaji, L. Chauhan, A. Babu, A. Chelvane, and T. Shanmugasundaram: Corros. Sci., 2023, vol. 221, p. 111298.10.1016/j.corsci.2023.111298 ↗
45. M.J.N.V. Prasad and A.H. Chokshi: Scr. Mater., 2010, vol. 63(1), pp. 136–39.10.1016/j.scriptamat.2010.03.034 ↗
46. A.H. Chokshi: Scr. Mater., 2001, vol. 44(11), pp. 2611–15.10.1016/S1359-6462(01)00949-6 ↗
47. R. Panicker, A.H. Chokshi, R.K. Mishra, R. Verma, and P.E. Krajewski: Acta Mater., 2009, vol. 57(13), pp. 3683–93.10.1016/j.actamat.2009.04.011 ↗
48. J.S. Kim, J.H. Kim, Y.T. Lee, C.G. Park, and C.S. Lee: Mater. Sci. Eng. A, 1999, vol. 263(2), pp. 272–80.10.1016/S0921-5093(98)01157-5 ↗
49. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42(7), pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
50. M. Kawasaki and T.G. Langdon: J. Mater. Sci., 2016, vol. 51, pp. 19–32.10.1007/s10853-015-9176-9 ↗
51. T. Xiong, S. Zheng, J. Pang, and X. Ma: Scr. Mater., 2020, vol. 186, pp. 336–40.10.1016/j.scriptamat.2020.04.035 ↗
52. A.H. Chokshi and T.G. Langdon: Acta Metall., 1989, vol. 37(2), pp. 715–23.10.1016/0001-6160(89)90255-1 ↗
53. X.G. Jiang, S.T. Yang, J.C. Earthman, and F.A. Mohamed: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 863–72.10.1007/BF02649753 ↗
54. A.H. Chokshi and A.K. Mukherjee: Acta Metall., 1989, vol. 37(11), pp. 3007–17.10.1016/0001-6160(89)90337-4 ↗
55. R. Raj: Acta Metall., 1978, vol. 26(6), pp. 995–1006.10.1016/0001-6160(78)90050-0 ↗
56. R. Raj and M. Ashby: Acta Metall., 1975, vol. 23(6), pp. 653–66.10.1016/0001-6160(75)90047-4 ↗
57. A.H. Chokshi: Mater. Sci. Eng. A, 2005, vol. 410, pp. 95–99.10.1016/j.msea.2005.08.069 ↗
58. A.H. Chokshi and T.G. Langdon: Acta Metall., 1987, vol. 35(5), pp. 1089–101.10.1016/0001-6160(87)90056-3 ↗
59. E.E. Underwood: JOM, 1962, vol. 14(12), pp. 914–19.10.1007/BF03378205 ↗