journal article·2023-12

Graphite–WS2 Copper-Based Self-lubricating Composites Prepared by Spark Plasma Sintering

Yongdu Li, Yuan Zhang, Yang Li, Xiaohong Wang, Junjie Huang, Mei Yang

Publisher page

Abstract

In this study, nickel-plated graphite/WS2 copper matrix composites with varying contents were prepared using the spark plasma sintering (SPS) technique. The porosity, mechanical properties, and tribological properties of these composites were investigated. The results indicate that increasing the mass ratio of WS2 to nickel-coated graphite results in higher porosity and lower compressive strength of the composites. The increase in hardness suggests that porosity has a significant effect on compressive strength, and the formation of Cu2S at the Cu–WS2 contact site is the primary reason for this increase. Among the composites, the Cu–20Gr–10WS2 composite exhibits the lowest friction coefficient (0.21) and wear rate (3.35 × 10−5 mm3/nm). This composite also shows a well-developed self-lubricating film and a smooth wear surface. The XPS etching reveals a lubricant film thickness of approximately 14.5 nm, and the main wear mechanism observed is adhesive wear.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Electrical Contact Performance and Analysis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. J. Cheng, F. Li, S. Zhu, J. Hao, J. Yang, W. Li, and W. Liu: J. Wear, 2017, vol. 386–387, pp. 39–48.10.1016/j.wear.2017.06.001 ↗
2. M. Grandin and U. Wiklund: J. Wear, 2018, vol. 398–399, pp. 227–35.10.1016/j.wear.2017.12.012 ↗
3. K. Rajkumar and S. Aravindan: J. Tribol. Lett., 2010, vol. 37, pp. 131–39.10.1007/s11249-009-9499-2 ↗
4. J. Zhen, J. Cheng, S. Zhu, J. Hao, Z. Qiao, J. Yang, and W. Liu: J. Tribol. Int., 2017, vol. 110, pp. 52–56.10.1016/j.triboint.2017.02.011 ↗
5. M.M.H. Bastwros, A.M.K. Esawi, and A. Wifi: J. Wear, 2013, vol. 307, pp. 164–73.10.1016/j.wear.2013.08.021 ↗
6. S. Huang, Y. Feng, H. Liu, K. Ding, and G. Qian: J. Mater. Sci. Eng.: A, 2013, vol. 560, pp. 685–92.10.1016/j.msea.2012.10.014 ↗
7. H. Tan, S. Wang, Y. Yu, J. Cheng, S. Zhu, Z. Qiao, and J. Yang: J. Tribol. Int., 2018, vol. 122, pp. 228–35.10.1016/j.triboint.2018.02.037 ↗
8. L. Zhang, J. Xiao, and K. Zhou: J. Tribol. Trans., 2012, vol. 55, pp. 473–80.10.1080/10402004.2012.671452 ↗
9. W. Chen, P. Feng, L. Dong, M. Ahangarkani, S. Ren, and Y. Fu: J. Surf. Coat Tech., 2018, vol. 353, pp. 300–08.10.1016/j.surfcoat.2018.08.088 ↗
10. K.H. Cho, U.S. Hong, K.S. Lee, and H. Jang: J. Tribol. Lett., 2007, vol. 27, pp. 301–06.10.1007/s11249-007-9234-9 ↗
11. C. Ma, G.Q. He, D.H. He, C.S. Chen, and Z.F. Hu: J. Wear, 2008, vol. 265, pp. 1087–92.10.1016/j.wear.2008.02.015 ↗
12. X.U. Wei, H.U. Rui, J. Li, Y. Zhang, and H. Fu: J. Trans. Nonferr. Met. Soc. China, 2012, vol. 22, pp. 78–84.10.1016/S1003-6326(11)61143-6 ↗
13. H. Kato, M. Takama, Y. Iwai, K. Washida, and Y. Sasaki: J. Wear, 2003, vol. 255, pp. 573–78.10.1016/S0043-1648(03)00072-3 ↗
14. J. Kováčik, Š Emmer, J. Bielek, and L. Keleši: J. Wear, 2008, vol. 265, pp. 417–21.10.1016/j.wear.2007.11.012 ↗
15. S.F. Moustafa, S.A. El-Badry, A.M. Sanad, and B. Kieback: J. Wear, 2002, vol. 253, pp. 699–710.10.1016/S0043-1648(02)00038-8 ↗
16. R. Voitovitch, A. Mortensen, F. Hodaj, and N. Eustathopoulos: J. Acta Mater., 1999, vol. 47, pp. 1117–28.10.1016/S1359-6454(99)00008-7 ↗
17. L. Yang, P. Shen, Q. Lin, F. Qiu, and Q. Jiang: J. Mater. Chem. Phys., 2010, vol. 124, pp. 499–503.10.1016/j.matchemphys.2010.07.001 ↗
18. L. Yang, P. Shen, Q. Lin, F. Qiu, and Q. Jiang: J. Appl. Surf. Sci., 2011, vol. 257, pp. 6276–81.10.1016/j.apsusc.2011.02.060 ↗
19. H. Cao, Z. Qian, L. Zhang, J. Xiao, and K. Zhou: J. Tribol. Trans., 2014, vol. 57, pp. 1037–43.10.1080/10402004.2014.931499 ↗
20. R. Tyagi, R. Tyagi, A.K. Das, and A. Mandal: J. Tribol. Int., 2018, vol. 120, pp. 80–92.10.1016/j.triboint.2017.12.023 ↗
21. L. Zhao, P. Yao, T. Gong, H. Zhou, M. Deng, Z. Wang, Z. Zhang, Y. Xiao, and F. Luo: J. Tribol. Lett., 2019, vol. 67, p. 98.10.1007/s11249-019-1200-9 ↗
22. J.L. Li and D.S. Xiong: J. Wear, 2008, vol. 265, pp. 533–39.10.1016/j.wear.2007.09.005 ↗
23. G. Xian, R. Walter, and F. Haupert: J. Appl. Polym. Sci., 2006, vol. 102, pp. 2391–2400.10.1002/app.24496 ↗
24. X. Li, Y. Gao, J. Xing, Y. Wang, and L. Fang: J. Wear, 2004, vol. 257, pp. 279–83.10.1016/j.wear.2003.12.012 ↗
25. Q. Wang, X. Zhang, and X. Pei: J. J MACROMOL SCI B, 2010, vol. 50, pp. 213–24.10.1080/00222341003641156 ↗
26. X. Liang, P. Wu, L. Lan, Y. Wang, Y. Ning, Y, Wang, and Y. Qin: J/OL. Materials, 2023, vol. 1610.3390/ma16051966 ↗
27. D. Jiang, Z. Jiang, J. Zhang, P. Lin, B. Peng, H. Zhang, J. Liao, W. Li, and J. Zou: J. ChemistrySelect, 2020, vol. 5, pp. 14331–39.10.1002/slct.202002965 ↗
28. X. Wang, Y. Su, Q. Ouyang, and D. Zhang: J. Alloys Compd., 2022, vol. 916, p. 165318.10.1016/j.jallcom.2022.165318 ↗
29. N. Hiraoka: J. Wear, 2001, vol. 249, pp. 1014–20.10.1016/S0043-1648(01)00845-6 ↗
30. Shuang-Ding C S-Y X R-R L C-S Z: J. Northeastern Univ., 2007, vol. 9, pp. 1285–88
31. Z.A. Munir and M. Ohyanagi: J. Mater. Sci., 2021, vol. 56, pp. 1–5.10.1007/s10853-020-05186-1 ↗
32. X. Liu, X. Shi, G. Lu, X. Deng, H. Zhou, Z. Yan, Y. Chen, and B. Xue: J. Alloys Compd., 2019, vol. 777, pp. 271–84.10.1016/j.jallcom.2018.11.021 ↗
33. Y. Liang, Y. Che: J. Northeast University Press, 1993
34. J.-K. Xiao, W. Zhang, L.-M. Liu, L. Zhang, and C. Zhang: J. Wear, 2017, vol. 384–385, pp. 61–71.10.1016/j.wear.2017.05.006 ↗
35. Y. Xie, X. Meng, Y. Chang, D. Mao, Z. Qin, L. Wan, and Y. Huang: J. Adv. Sci., 2022, vol. 9, p. 2104464.10.1002/advs.202104464 ↗
36. Y. Xie, X. Meng, Y. Chang, D. Mao, Y. Yang, Y. Xu, L. Wan, and Y. Huang: J. Compos. Sci. Technol., 2022, vol. 219, p. 109225.10.1016/j.compscitech.2021.109225 ↗
37. R. Zang, Y. Xie, J. Liu, X. Meng, Y. Huang, and L. Wan: J. Metall. Mater. Trans. A, 2022, vol. 53, pp. 3210–5321.10.1007/s11661-022-06740-z ↗
38. J. Ruan and P H. J. China Machinery Industry Press, 1982, vol. 326
39. Y. Yin, C. Du, Z. Zheng, T. Xie, K. Liu, and Y. Wu: J. Chin. J. Nonferr. Met., 2006, vol. 16, pp. 1895–1901.
40. V.V. Gorskii, A.N. Gripachevskii, A.V. Vereshchak, B.M. Krivitskii, and V.A. Tsitovich: J. Powder Metall. Met. C+, 1993, vol. 32, pp. 308–13.10.1007/BF00560015 ↗
41. W.J. Zhang. Yangzhou University, 2019
42. Su. Yunfeng, Y. Zhang, J. Song, and Hu. Litian: J. Wear, 2017, vol. 372–373, pp. 130–38.
43. N. Argibay, T.F. Babuska, J.F. Curry, M.T. Dugger, P. Lu, D.P. Adams, B.L. Nation, B.L. Doyle, M. Pham, A. Pimentel, C. Mowry, A.R. Hinkle, and M. Chandross: J. Carbon, 2018, vol. 138, pp. 61–68.10.1016/j.carbon.2018.06.006 ↗
44. K.P. Furlan, D.E. Mello, and A.N. Klein: J. Tribol. Int., 2018, vol. 120, pp. 280–98.10.1016/j.triboint.2017.12.033 ↗
45. Y. Xian, Z. Zou, C. Tu, Y. Ding, T. Liao, F. Zhang, Q. Luo, G. Wu, and G. Gao: J. Alloys Compd., 2020, vol. 835, p. 155444.10.1016/j.jallcom.2020.155444 ↗
46. R.G. Chandrakanth, K. Rajkumar, and S.J. Aravindan: Int. J. Adv. Manuf. Technol., 2010, vol. 48, pp. 645–53.10.1007/s00170-009-2474-0 ↗
47. N. Tian, L.L. Dong, H.L. Wang, Y.Q. Fu, W.T. Huo, Y. Liu, J.S. Yu, and Y.S. Zhang: J. Alloys Compd., 2021, vol. 867, p. 159093.10.1016/j.jallcom.2021.159093 ↗
48. Y. Xiao, Z. Zhang, P. Yao, K. Fan, H. Zhou, T. Gong, L. Zhao, and M. Deng: J. Tribol. Int., 2018, vol. 119, pp. 585–92.10.1016/j.triboint.2017.11.038 ↗
49. C.-F. Han, H.-Y. Chu, R.-Y. Luo, N.-T. Liao, C.-C. Wei, G.-L. Chen, P.-H. Tsai, Y.-L. Chiu, Y.-C. Hwang, and J.-F. Lin: J. Wear, 2018, vol. 406–407, pp. 126–39.10.1016/j.wear.2018.03.006 ↗
50. S. Fan, L. Zhang, L. Cheng, G. Tian, and S. Yang: J. Compos. Sci. Technol., 2010, vol. 70, pp. 959–65.10.1016/j.compscitech.2010.02.012 ↗
51. J. Zhang, Xu. Yongdong, L. Zhang, and L. Cheng: Int. J. Appl. Ceram. Technol., 2007, vol. 4, pp. 463–69.10.1111/j.1744-7402.2007.02155.x ↗
52. B. Lin, H. Wang, J. Wei, W. Zheng, Y. Ma, J. Wang, and T. Sui: J. Ceram. Int., 2021, vol. 47, pp. 8627–33.10.1016/j.ceramint.2020.11.231 ↗
53. Y. Zhan and G. Zhang: J. Mater. Des., 2006, vol. 27, pp. 79–84.10.1016/j.matdes.2004.08.019 ↗
54. J.F. Archard: J. Nature, 1953, vol. 172, pp. 918–19.10.1038/172918a0 ↗