Influence of Laser Shock Peening and Ultrasonic Nanocrystal Surface Modification on Residual Stress, Microstructure, and Corrosion–Fatigue Behavior of Aluminum 7075-T6
Source abstract
Abstract
Aluminum 7075-T6 alloy was subjected to Laser Shock Peening without Coating (LSPwC) and Ultrasonic Nanocrystal Surface Modification (UNSM) to boost fatigue performance in both air and corrosive environment. Severe plastic deformation (SPD) caused by UNSM treatment induced significantly higher (~3.5 × ) surface compressive residual stress than LSPwC, while the intense shockwaves generated by LSPwC introduced ~ 3 × higher depth of compression. Electrochemical results confirmed improved polarization resistance and reduced corrosion rate post LSPwC, which is mainly attributed to its oxide layer and near-surface microstructural homogenization. Changes in the mechanical and corrosion behavior of the alloy after LSPwC produced up to ~ 650 pct augment in corrosion–fatigue life over base material while UNSM improved the performance by up to ~ 250 pct. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. P.S. Pao, C.R. Feng, and S.J. Gill: Corrosion, 2000, vol. 56, pp. 1022–31.10.5006/1.3294379 ↗
2. K.K. Sankaran, R. Perez, and K.V. Jata: Mater. Sci. Eng. A, 2001, vol. 297, pp. 223–29.10.1016/S0921-5093(00)01216-8 ↗
3. R.M. Chlistovsky, P.J. Heffernan, and D.L. DuQuesnay: Int. J. Fatigue, 2007, vol. 29, pp. 1941–49.10.1016/j.ijfatigue.2007.01.010 ↗
4. X.D. Li, X.S. Wang, H.H. Ren, Y.L. Chen, and Z.T. Mu: Corros. Sci., 2012, vol. 55, pp. 26–33.10.1016/j.corsci.2011.09.025 ↗
5. V.K. Gupta and S.R. Agnew: Int. J. Fatigue, 2011, vol. 33, pp. 1159–74.10.1016/j.ijfatigue.2011.01.018 ↗
6. A. Gill, A. Telang, S.R. Mannava, D. Qian, Y.S. Pyoun, H. Soyama, and V.K. Vasudevan: Mater. Sci. Eng. A, 2013, vol. 576, pp. 346–55.10.1016/j.msea.2013.04.021 ↗
7. C.S. Montross, T. Wei, L. Ye, G. Clark, and Y.W. Mai: Int. J. Fatigue, 2002, vol. 24, pp. 1021–36.10.1016/S0142-1123(02)00022-1 ↗
8. Z. Bergant, U. Trdan, and J. Grum: Int. J. Fatigue, 2016, vol. 87, pp. 444–55.10.1016/j.ijfatigue.2016.02.027 ↗
9. O. Hatamleh, J. Lyons, and R. Forman: Int. J. Fatigue, 2007, vol. 29, pp. 421–34.10.1016/j.ijfatigue.2006.05.007 ↗
10. S.R. Kondavalasa, A. Prakash, R. Jagtap, S. Shanmugam, I. Samajdar, V.K. Vasudevan, and G. Wilde: Mater. Charact., 2019, vol. 153, pp. 328–38.10.1016/j.matchar.2019.05.021 ↗
11. M.K. Khan, M.E. Fitzpatrick, Q.Y. Wang, Y.S. Pyoun, and A. Amanov: Fatigue Fract. Eng. Mater. Struct., 2018, vol. 41, pp. 844–55.10.1111/ffe.12732 ↗
12. P. Peyre, R. Fabbro, P. Merrien, and H.P. Lieurade: Mater. Sci. Eng. A, 1996, vol. 210, pp. 102–13.10.1016/0921-5093(95)10084-9 ↗
13. A.K. Gujba, Z. Ren, Y. Dong, C. Ye, and M. Medraj: Surf. Coat. Technol., 2016, vol. 307, pp. 157–70.10.1016/j.surfcoat.2016.08.054 ↗
14. J.T. Wang, Y.K. Zhang, J.F. Chen, J.Y. Zhou, M.Z. Ge, Y.L. Lu, and X.L. Li: Mater. Sci. Eng. A, 2015, vol. 647, pp. 7–14.10.1016/j.msea.2015.08.084 ↗
15. U. Trdan, J.A. Porro, J.L. Ocaña, and J. Grum: Surf. Coat. Technol., 2012, vol. 208, pp. 109–16.10.1016/j.surfcoat.2012.08.048 ↗
16. U. Trdan and J. Grum: Corros. Sci., 2012, vol. 59, pp. 324–33.10.1016/j.corsci.2012.03.019 ↗
17. Y. Sano, M. Obata, T. Kubo, N. Mukai, M. Yoda, K. Masaki, and Y. Ochi: Mater. Sci. Eng. A, 2006, vol. 417, pp. 334–40.10.1016/j.msea.2005.11.017 ↗
18. A. Sharma, J. Song, D. Furfari, S.R. Mannava, and V.K. Vasudevan: Scripta Mater., 2021, vol. 202, p. 114012.10.1016/j.scriptamat.2021.114012 ↗
19. P. Peyre, C. Carboni, P. Forget, G. Beranger, C. Lemaitre, and D. Stuart: J. Mater. Sci., 2007, vol. 42, pp. 6866–77.10.1007/s10853-007-1502-4 ↗
20. S. Sathyajith, S. Kalainathan, and S. Swaroop: Opt. Laser Technol., 2013, vol. 45, pp. 389–94.10.1016/j.optlastec.2012.06.019 ↗
21. Y. Sano, K. Masaki, T. Gushi, and T. Sano: Mater. Des., 2012, vol. 36, pp. 809–14.10.1016/j.matdes.2011.10.053 ↗
22. E. Troiani and N. Zavatta: Metals (Basel), 2019, https://doi.org/10.3390/met9070728.10.3390/met9070728 ↗
23. C.J. Lee, R.I. Murakami, and C.M. Suh: Int. J. Mod. Phys. B, 2010, vol. 24, pp. 2512–17.10.1142/S0217979210065180 ↗
24. C. Ye, A. Telang, A. Gill, X. Wen, S.R. Mannava, D. Qian, and V.K. Vasudevan: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 972–78.10.1007/s11661-017-4451-9 ↗
25. M. Gao, C.R. Feng, and R.P. Wei: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1145–51.10.1007/s11661-998-0240-9 ↗
26. J. Gubicza, I. Schiller, N.Q. Chinh, J. Illy, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A, 2007, vol. 460–461, pp. 77–85.10.1016/j.msea.2007.01.001 ↗
27. P.W. Trimby, Y. Cao, Z. Chen, S. Han, K.J. Hemker, J. Lian, X. Liao, P. Rottmann, S. Samudrala, J. Sun, J.T. Wang, J. Wheeler and J.M. Cairney: Acta Mater., 2014, vol. 62, pp. 69–80.10.1016/j.actamat.2013.09.026 ↗
28. U. Trdan, M. Skarba, and J. Grum: Mater. Charact., 2014, vol. 97, pp. 57–68.10.1016/j.matchar.2014.08.020 ↗
29. Z.D. Wang, G.F. Sun, Y. Lu, M.Z. Chen, K.D. Bi, and Z.H. Ni: Surf. Coat. Technol., 2020, https://doi.org/10.1016/j.surfcoat.2020.125403.10.1016/j.surfcoat.2020.125403 ↗
30. V. Pandey, J.K. Singh, K. Chattopadhyay, N.C.S. Srinivas, and V. Singh: J. Alloys Compd., 2017, vol. 723, pp. 826–40.10.1016/j.jallcom.2017.06.310 ↗
31. C. Park, D. Jung, E.J. Chun, S. Ahn, H. Jang, and Y.J. Kim: Appl. Surf. Sci., 2020, vol. 514, p. 145917.10.1016/j.apsusc.2020.145917 ↗
32. C. Correa, L. Ruiz De Lara, M. Díaz, A. Gil-Santos, J.A. Porro, and J.L. Ocaña: Int. J. Fatigue, 2015, vol. 79, pp. 1–9.10.1016/j.ijfatigue.2015.04.018 ↗
33. S. Adu-Gyamfi, X.D. Ren, E.A. Larson, Y. Ren, and Z. Tong: Opt. Laser Technol., 2018, vol. 108, pp. 177–85.10.1016/j.optlastec.2018.06.036 ↗
34. Y. Efe, I. Karademir, F. Husem, E. Maleki, R. Karimbaev, A. Amanov, and O. Unal: Appl. Surf. Sci., 2020, vol. 528, p. 146922.10.1016/j.apsusc.2020.146922 ↗
35. R. Sun, L. Li, Y. Zhu, W. Guo, P. Peng, B. Cong, J. Sun, Z. Che, B. Li, C. Guo, and L. Liu: J. Alloys Compd., 2018, vol. 747, pp. 255–65.10.1016/j.jallcom.2018.02.353 ↗
36. A. Amanov, I.S. Cho, Y.S. Pyoun, C.S. Lee, and I.G. Park: Wear, 2012, vol. 286–287, pp. 136–44.10.1016/j.wear.2011.06.001 ↗
37. J. Huang, Z. Li, B.Y. Liaw, and J. Zhang: J. Power Sources, 2016, vol. 309, pp. 82–98.10.1016/j.jpowsour.2016.01.073 ↗
38. D.A. Jones: Principles and Prevention of Corrosion, 2nd ed. Pearson, New York, 1996.
39. J.B. Bajat, I. Milošev, Ž Jovanović, R.M. Jančić-Heinemann, M. Dimitrijević, and V.B. Mišković-Stanković: Corros. Sci., 2010, vol. 52, pp. 1060–69.10.1016/j.corsci.2009.11.035 ↗
40. H. Shi, E.H. Han, and F. Liu: Corros. Sci., 2011, vol. 53, pp. 2374–84.10.1016/j.corsci.2011.03.012 ↗
41. R.G. Kelly, J.R. Scully, D. Shoesmith, and R.G. Buchheit: Electrochemical Techniques in Corrosion Science and Engineering, Routledge, New York, 2002.10.1201/9780203909133 ↗
42. U. Trdan and J. Grum: Corros. Sci., 2014, vol. 82, pp. 328–38.10.1016/j.corsci.2014.01.032 ↗
43. W. Yang, S. Ji, Q. Zhang, and M. Wang: Mater. Des., 2015, vol. 85, pp. 752–61.10.1016/j.matdes.2015.06.183 ↗
44. B. Wang, J. Liu, M. Yin, Y. Xiao, X.H. Wang, and J.X. He: Mater. Corros., 2016, vol. 67, pp. 51–59.10.1002/maco.201408211 ↗
45. J. Ma, J. Wen, Q. Li, and Q. Zhang: J. Power Sources, 2013, vol. 226, pp. 156–61.10.1016/j.jpowsour.2012.10.075 ↗
46. T. Hong and M. Nagumo: Corros. Sci., 1997, vol. 39, pp. 1665–72.10.1016/S0010-938X(97)00072-3 ↗
47. A.G. Sanchez, C. You, M. Leering, D. Glaser, D. Furfari, M.E. Fitzpatrick, J. Wharton, and P.A.S. Reed: Int. J. Fatigue, 2021, vol. 143, p. 106025.10.1016/j.ijfatigue.2020.106025 ↗
48. Q.Y. Wang, N. Kawagoishi, and Q. Chen: Scripta Mater., 2003, vol. 49, pp. 711–16.10.1016/S1359-6462(03)00365-8 ↗
49. N. Birbilis and R.G. Buchheit: J. Electrochem. Soc., 2005, vol. 152, p. B140.10.1149/1.1869984 ↗
50. S. Prabhakaran, S. Kalainathan, P. Shukla, and V.K. Vasudevan: Opt. Laser Technol., 2019, vol. 115, pp. 447–58.10.1016/j.optlastec.2019.02.041 ↗
51. F. Andreatta, M.M. Lohrengel, H. Terryn, and J.H.W. De Wit: Electrochim. Acta, 2003, vol. 48, pp. 3239–47.10.1016/S0013-4686(03)00379-7 ↗
52. S.S. Singh, E. Guo, H. Xie, and N. Chawla: Intermetallics, 2015, vol. 62, pp. 69–75.10.1016/j.intermet.2015.03.008 ↗
53. A.I. Ikeuba, B. Zhang, J. Wang, E.-H. Han, W. Ke, and P.C. Okafor: J. Electrochem. Soc., 2018, vol. 165, pp. C180-94.10.1149/2.0861803jes ↗
54. S. Amini, S.A. Kariman, and R. Teimouri: Int. J. Adv. Manuf. Technol., 2017, vol. 91, pp. 1091–1102.10.1007/s00170-016-9795-6 ↗
55. K.T. Kim and Y.S. Kim: Materials (Basel), 2019, https://doi.org/10.3390/ma12193165.10.3390/ma12193165 ↗
56. K.T. Kim, J.H. Lee, and Y.S. Kim: Materials (Basel), 2017, vol. 10, pp. 1–14.
57. T. Wang, J. Yu, and B. Dong: Surf. Coat. Technol., 2006, vol. 200, pp. 4777–81.10.1016/j.surfcoat.2005.04.046 ↗
58. C. Aparicio, F. Javier Gil, C. Fonseca, M. Barbosa, and J.A. Planell: Biomaterials, 2003, vol. 24, pp. 263–73.10.1016/S0142-9612(02)00314-9 ↗
59. Q. Sun, X. Liu, Q. Han, J. Li, R. Xu, and K. Zhao: Surf. Coat. Technol., 2018, vol. 337, pp. 552–60.10.1016/j.surfcoat.2018.01.072 ↗
60. T.M. Yue, L.J. Yan, C.P. Chan, C.F. Dong, H.C. Man, and G.K.H. Pang: Surf. Coat. Technol., 2004, vol. 179, pp. 158–64.10.1016/S0257-8972(03)00850-8 ↗
61. A. Amanov, Y.-S. Pyun, J.-H. Kim, C.-M. Suh, I.-S. Cho, H.-D. Kim, Q. Wang, and M.K. Khan: Fatigue Fract. Eng. Mater. Struct., 2015, vol. 38, pp. 1266–73.10.1111/ffe.12330 ↗
62. S. Suresh, A.K. Vasudévan, and P.E. Bretz: Metall. Trans. A, 1984, vol. 15A, pp. 369–79.10.1007/BF02645122 ↗