A Limit to Accelerated Free-Sintering: Nano-Phase Separation Interferes With Organic Debinding
Source abstract
Abstract
Abstract Nano-phase separating Ni–12 at. pct Ag powders are processed via high-energy ball milling and brought into a supersaturated state with a reduction of the grain size to the nanocrystalline scale, a combination that is designed to encourage rapid densification by phase separation upon heating. This unstable powder is then characterized by dilatometry, in-situ x-ray diffraction, thermogravimetry and microstructure analysis for sintering cycles up to 940 °C. However, these powder compacts exhibit excessive pore evolution and significant macroscopic swelling caused by removal of the organic process additives. This competition of organic removal with densification is known in nanocrystalline metals, but the present study adds an additional dimension of phase separation, which shifts the dominant swelling mechanism as the formation of the second phase traps the volatilizing organics and hinders the debinding process. The creep swelling and overall loss in relative density is then dominated by the creep deformation of the second Ag phase. The interference between organic removal and low-temperature onset of consolidation represents a new challenge to efforts aimed at rapid free sintering and should guide the design of rapidly sintering alloys; specifically, the present work emphasizes the need to select alloys that have their sintering-accelerating phase separation temperature above the range where gases are evolved.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. M. Molitch-Hou: in Additive Manufacturing, Elsevier, Amsterdam, 2018, pp. 1–38.10.1016/B978-0-12-812155-9.00001-3 ↗
2. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.W. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, vol. 92, pp. 112–24.10.1016/j.pmatsci.2017.10.001 ↗
3. M.K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R.I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja, and F. Martina: CIRP Ann. Manuf. Technol., 2016, vol. 65, pp. 737–60.10.1016/j.cirp.2016.05.004 ↗
4. W.J. Sames, F.A. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315–60.10.1080/09506608.2015.1116649 ↗
5. A. Bose, C.A. Schuh, J.C. Tobia, N. Tuncer, N.M. Mykulowycz, A. Preston, A.C. Barbati, B. Kernan, M.A. Gibson, D. Krause, T. Brzezinski, J. Schroers, R. Fulop, J.S. Myerberg, M. Sowerbutts, Y.M. Chiang, A. John Hart, E.M. Sachs, E.E. Lomeli, and A.C. Lund: Int. J. Refract. Met. Hard Mater., 2018, vol. 73, pp. 22–8.10.1016/j.ijrmhm.2018.01.019 ↗
6. S.M. Allen and E.M. Sachs: Met. Mater. Int., 2000, vol. 6, pp. 589–94.10.1007/BF03028104 ↗
7. M. Ziaee and N.B. Crane: Addit. Manuf., 2019, vol. 28, pp. 781–801.
8. D.D. Gu, W. Meiners, K. Wissenbach, and R. Poprawe: Int. Mater. Rev., 2012, vol. 57, pp. 133–64.10.1179/1743280411Y.0000000014 ↗
9. W.J. Huppmann and H. Riegger: Acta Metall., 1975, vol. 23, pp. 965–71.10.1016/0001-6160(75)90010-3 ↗
10. R.M. German, P. Suri, and S.J. Park: J. Mater. Sci., 2009, vol. 44, pp. 1–39.10.1007/s10853-008-3008-0 ↗
11. P. Lee, H. Chung, S.W. Lee, J. Yoo, and J. Ko: in Materials; Micro and Nano Technologies; Properties, Applications and Systems; Sustainable Manufacturing, vol. 1, American Society of Mechanical Engineers, New York, 2014, pp. 1–8.
12. B.N. Turner and S.A. Gold: Rapid Prototyp. J., 2015, vol. 21, pp. 250–61.10.1108/RPJ-02-2013-0017 ↗
13. E.R. Denlinger, J.C. Heigel, P. Michaleris, and T.A. Palmer: J. Mater. Process. Technol., 2015, vol. 215, pp. 123–31.10.1016/j.jmatprotec.2014.07.030 ↗
14. A.S. Wu, D.W. Brown, M. Kumar, G.F. Gallegos, and W.E. King: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2014, vol. 45, pp. 6260–70.10.1007/s11661-014-2549-x ↗
15. S.A. Khairallah, A.T. Anderson, A. Rubenchik, and W.E. King: Acta Mater., 2016, vol. 108, pp. 36–45.10.1016/j.actamat.2016.02.014 ↗
16. M. Grasso and B.M. Colosimo: Meas. Sci. Technol., 2017, https://doi.org/10.1088/1361-6501/aa5c4f.10.1088/1361-6501/aa5c4f ↗
17. H.L. Wei, J. Mazumder, and T. DebRoy: Sci. Rep., 2015, vol. 5, pp. 1–7.
18. F. Zhang, L.E. Levine, A.J. Allen, M.R. Stoudt, G. Lindwall, E.A. Lass, M.E. Williams, Y. Idell, and C.E. Campbell: Acta Mater., 2018, vol. 152, pp. 200–14.10.1016/j.actamat.2018.03.017 ↗
19. D.N. Yoon and W.J. Huppmann: Acta Metall., 1979, vol. 27, pp. 693–98.10.1016/0001-6160(79)90020-8 ↗
20. I.J. Toth and N.A. Lockington: J. Less Common Met., 1967, vol. 12, pp. 353–65.10.1016/0022-5088(67)90003-3 ↗
21. G.V. Samsonov and V.I. Yakovlev: Soviet Powder Metall. Met. Ceram., 1969, vol. 8, pp. 804–08.10.1007/BF00778338 ↗
22. H.W. Hayden and J.H. Brophy: J. Electrochem. Soc., 1963, vol. 110, p. 805.10.1149/1.2425876 ↗
23. V.V. Panichkina, V.V. Skorokhod, and A.F. Khrienko: Soviet Powder Metall. Met. Ceram., 1967, vol. 6, pp. 558–60.10.1007/BF00774073 ↗
24. H.J. Ryu, S.H. Hong, and W.H. Baek: Mater. Sci. Eng. A, 2000, vol. 291, pp. 91–96.10.1016/S0921-5093(00)00968-0 ↗
25. J.L. Johnson and R.M. German: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 1996, vol. 27, pp. 441–50.10.1007/BF02648421 ↗
26. R.M. German and Z.A. Munir: Metall. Trans. A, 1976, vol. 7, pp. 1873–77.10.1007/BF02659818 ↗
27. M.T. Stawovy, K. Myers, and S. Ohm: Int. J. Refract. Met. Hard Mater., 2019, vol. 83, 104981.10.1016/j.ijrmhm.2019.104981 ↗
28. R.K. Enneti, K.C. Prough, T.A. Wolfe, A. Klein, N. Studley, and J.L. Trasorras: Int. J. Refract. Met. Hard Mater., 2018, vol. 71, pp. 28–35.10.1016/j.ijrmhm.2017.10.023 ↗
29. R.K. Enneti and K.C. Prough: Int. J. Refract. Met. Hard Mater., 2019, vol. 78, pp. 228–32.10.1016/j.ijrmhm.2018.10.003 ↗
30. M. Park and C.A. Schuh: Nat. Commun., 2015, vol. 6, p. 6858.10.1038/ncomms7858 ↗
31. T. Chookajorn, M. Park, and C.A. Schuh: J. Mater. Res., 2015, vol. 30, pp. 151–63.10.1557/jmr.2014.385 ↗
32. M. Park, T. Chookajorn, and C.A. Schuh: Acta Mater., 2018, vol. 145, pp. 123–33.10.1016/j.actamat.2017.11.030 ↗
33. N.C. Kothari: J. Less Common Met., 1967, vol. 13, pp. 457–68.10.1016/0022-5088(67)90039-2 ↗
34. R.M. German: Metall. Mater. Trans. A., 1995, vol. 26A, pp. 279–88.10.1007/BF02664666 ↗
35. S.-M. Lee and S.-J.L. Kang: Acta Mater., 1998, vol. 46, pp. 3191–202.10.1016/S1359-6454(97)00489-8 ↗
36. J. Luo, V.K. Gupta, D.H. Yoon, and H.M. Meyer: Appl. Phys. Lett., 2005, vol. 87, 231902.10.1063/1.2138796 ↗
37. V.K. Gupta, D.-H. Yoon, H.M. Meyer, and J. Luo: Acta Mater., 2007, vol. 55, pp. 3131–42.10.1016/j.actamat.2007.01.017 ↗
38. A. Bose, A.C. Lund, J.P. Reidy, C.A. Craven, M.A. Gibson, A.C. Barbati, C.A. Schuh, L. Jorgensen, J.C. Tobia, A. Dias, and N. Tuncer: Int. J. Powder Metall., 2021, vol. 57, pp. 17–30.
39. Y. Bai and C.B. Williams: Rapid Prototyp. J., 2015, vol. 21, pp. 177–85.10.1108/RPJ-12-2014-0180 ↗
40. B. Verlee, T. Dormal, and J. Lecomte-Beckers: Powder Metall., 2012, vol. 55, pp. 260–67.10.1179/0032589912Z.00000000082 ↗
41. M. Ziaee, E.M. Tridas, and N.B. Crane: JOM, 2017, vol. 69, pp. 592–96.10.1007/s11837-016-2177-6 ↗
42. A.K. Dhaliwal and J.N. Hay: Thermochim. Acta, 2002, vol. 391, pp. 245–55.10.1016/S0040-6031(02)00187-9 ↗
43. M.A. Moharram and M.G. Khafagi: J. Appl. Polym. Sci., 2006, vol. 102, pp. 4049–57.10.1002/app.24367 ↗
44. P. Nandwana, A.M. Elliott, D. Siddel, A. Merriman, W.H. Peter, and S.S. Babu: Curr. Opin. Solid State Mater. Sci., 2017, vol. 21, pp. 207–18.10.1016/j.cossms.2016.12.002 ↗
45. A. Mostafaei, J. Toman, E.L. Stevens, E.T. Hughes, Y.L. Krimer, and M. Chmielus: Acta Mater., 2017, vol. 124, pp. 280–89.10.1016/j.actamat.2016.11.021 ↗
46. E. Hnatkova, B. Hausnerova, A. Hales, L. Jiranek, F. Derguti, and I. Todd: Powder Technol., 2017, vol. 322, pp. 439–46.10.1016/j.powtec.2017.09.029 ↗
47. Y. Naunheim and C.A. Schuh: Acta Mater., 2023, vol. 247, 118743.10.1016/j.actamat.2023.118743 ↗
48. H. Massalski, R.P. Okamoto, L. Subramanian, and T.B. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed. ASM International, Metals Park, 1990.
49. M. Singleton and P. Nash: J. Phase Equilib., 1987, vol. 8, pp. 119–21.10.1007/BF02873194 ↗
50. H. Okamoto: J. Phase Equilib. Diffus., 2013, vol. 34, pp. 493–505.10.1007/s11669-013-0256-8 ↗
51. G. Cocco, S. Enzo, N.T. Barrett, and K.J. Roberts: Phys. Rev. B, 1992, vol. 45, p. 7066.10.1103/PhysRevB.45.7066 ↗
52. A.O. Aning, I.Z. Wang, and T.H. Courtney: Acta Metall. Mater., 1993, vol. 41, pp. 165–74.10.1016/0956-7151(93)90348-V ↗
53. Y. Ashkenazy, N.Q. Vo, D. Schwen, R.S. Averback, and P. Bellon: Acta Mater., 2012, vol. 60, pp. 984–93.10.1016/j.actamat.2011.11.014 ↗
54. J. Xu, U. Herr, T. Klassen, and R.S. Averback: J. Appl. Phys., 1996, vol. 79, pp. 3935–945.10.1063/1.361820 ↗
55. Z.C. Cordero and C.A. Schuh: Acta Mater., 2015, vol. 82, pp. 123–36.10.1016/j.actamat.2014.09.009 ↗
56. Z.C. Cordero, B.E. Knight, and C.A. Schuh: Int. Mater. Rev., 2016, vol. 6608, pp. 1–8.
57. E.E. Underwood: Quantitative Stereology, Addison-Wesley, Reading, 1970.
58. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
59. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1–84.10.1016/S0079-6425(99)00010-9 ↗
60. L. Vegard: Z. Phys., 1921, vol. 5, pp. 17–26.10.1007/BF01349680 ↗
61. D. Bonyuet, J. Ochoa, and G. González: J. Metastable Nanocryst. Mater., 2004, vol. 20–21, pp. 225–30.
62. Z.L. Zhao, Y. Niu, F. Gesmundo, and C.L. Wang: Oxid. Met., 2000, vol. 54, pp. 559–74.10.1023/A:1004603020951 ↗
63. A. Bachmaier, J. Keckes, K.S. Kormout, and R. Pippan: Philos. Magn. Lett., 2014, vol. 94, pp. 9–17.10.1080/09500839.2013.852284 ↗
64. D. Amram and C.A. Schuh: Scr. Mater., 2020, vol. 180, pp. 57–61.10.1016/j.scriptamat.2020.01.021 ↗
65. F. Delogu and G. Cocco: Mater. Sci. Eng. A, 2006, vol. 422, pp. 198–204.10.1016/j.msea.2006.02.032 ↗
66. C.W. Sinclair, J.D. Embury, and G.C. Weatherly: Mater. Sci. Eng. A, 1999, vol. 272, pp. 90–98.10.1016/S0921-5093(99)00477-3 ↗
67. G. Reglitz, B. Oberdorfer, N. Fleischmann, J.A. Kotzurek, S.V. Divinski, W. Sprengel, G. Wilde, and R. Würschum: Acta Mater., 2016, vol. 103, pp. 396–406.10.1016/j.actamat.2015.10.004 ↗
68. T.J. Rupert, J.R. Trelewicz, and C.A. Schuh: J. Mater. Res., 2012, vol. 27, pp. 1285–94.10.1557/jmr.2012.55 ↗
69. Y. Sakka and T. Uchikoshi: Powder Metall., 1993, vol. 36, pp. 179–85.10.1179/pom.1993.36.3.179 ↗
70. Y. Sakka, T. Uchikoshi, E. Ozawa, and E. Ozawa: Mater. Trans. JIM, 1990, vol. 31, pp. 802–09.10.2320/matertrans1989.31.802 ↗
71. H.J.T. Ellingham: J. Soc. Chem. Ind., 1944, vol. 63, pp. 125–33.10.1002/jctb.5000630501 ↗
72. R. Jiang, L. Monteil, K. Kimes, A. Mostafaei, and M. Chmielus: Int. J. Adv. Manuf. Technol., 2021, vol. 116, pp. 3827–38.10.1007/s00170-021-07496-3 ↗
73. F.D. Richardson: J. Iron Steel Inst., 1953, vol. 175, pp. 33–51.
74. B. Ruscic, D. Feller, and K.A. Peterson: Theor. Chem. Acc., 2014, vol. 133, pp. 1–2.10.1007/s00214-013-1415-z ↗
75. R.D. Holmes, H.S.C. O’Neill, and R.J. Arculus: Geochim. Cosmochim. Acta, 1986, vol. 50, pp. 2439–52.10.1016/0016-7037(86)90027-X ↗
76. M.W. Chase, Jr.: in Journal of Physical and Chemical Reference Data Monograph, vol. 9, 4th ed., American Chemical Society, 1998, pp. 1–1951.
77. C. Oliver and C.A. Schuh: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2021, vol. 52, pp. 4479–87.10.1007/s11661-021-06399-y ↗
78. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book, Elsevier, 2003.
79. M.F. Ashby: Acta Metall., 1974, vol. 22, pp. 275–89.10.1016/0001-6160(74)90167-9 ↗
80. I.W. Chen: Acta Metall., 1982, vol. 30, pp. 1655–64.10.1016/0001-6160(82)90187-0 ↗