journal article·2023-09Open access

Investigating the Impact of Pre-deformation on Age Hardening and Pitting Corrosion Resistance of 17-4 PH Stainless Steel

Davood Nakhaie

Abstract

17-4 PH stainless steel is widely used in various industries due to its high mechanical strength and good corrosion resistance. In this study, the effects of pre-deformation in the form of cold rolling on the age-hardening behavior and pitting corrosion resistance of 17-4 PH stainless steel were investigated. A mechanistic approach was employed to tailor the metastable pitting behavior of the alloy as a function of pre-deformation and its overall pitting corrosion resistance. The results indicated that pre-deformation increased the peak hardness of the alloy without negatively impacting its pitting potential (Epit). In addition, pre-deformation increased the likelihood of metastable pits transitioning to stable growth due to an increase in their dissolution kinetics, while decreasing the rate of pit initiation. Consequently, Epit, as a function of these two parameters, remained unchanged with pre-deformation. This study demonstrates that cold rolling followed by aging can be used to improve the hardness of 17-4 PH stainless steel without compromising its pitting corrosion resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. G. Yeli, M.A. Auger, K. Wilford, G.D.W.W. Smith, P.A.J.J. Bagot, and M.P. Moody: Acta Mater., 2017, vol. 125, pp. 38–49.10.1016/j.actamat.2016.11.052 ↗
2. S.S.M. Tavares, F.J. da Silva, C. Scandian, G.F. da Silva, and H.F.G. de Abreu: Corros. Sci., 2010, vol. 52, pp. 3835–39.10.1016/j.corsci.2010.07.016 ↗
3. C. Rowolt, B. Milkereit, A. Springer, C. Kreyenschulte, and O. Kessler: J. Mater. Sci., 2020, vol. 55, pp. 13244–57.10.1007/s10853-020-04880-4 ↗
4. M. Murayama, K. Hono, and Y. Katayama: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 345–53.10.1007/s11661-999-0323-2 ↗
5. E.A. Lass, M.R. Stoudt, and M.E. Williams: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 1619–24.10.1007/s11661-019-05124-0 ↗
6. I. Vysotskiy, S. Malopheyev, I. Zuiko, S. Mironov, and R. Kaibyshev: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 4143–47.10.1007/s11661-022-06829-5 ↗
7. T. Cassagne, M. Bonis, C. Duret, and J.L. Crolet: Corrosion, 2003, vol. 2003, pp. 1–3.
8. U.K. Viswanathan, S. Banerjee, and R. Krishnan: Mater. Sci. Eng. A, 1988, vol. 104, pp. 181–89.10.1016/0025-5416(88)90420-X ↗
9. C.N. Hsiao, C.S. Chiou, and J.R. Yang: Mater. Chem. Phys., 2002, vol. 74, pp. 134–42.10.1016/S0254-0584(01)00460-6 ↗
10. R. Bhambroo, S. Roychowdhury, V. Kain, and V.S. Raja: Mater. Sci. Eng. A, 2013, vol. 568, pp. 127–33.10.1016/j.msea.2013.01.011 ↗
11. B.C. Syrett, R. Viswanathan, S.S. Wing, and J.E. Wittig: Corrosion, 1982, vol. 38, pp. 273–82.10.5006/1.3577350 ↗
12. U. Kamachi Mudali, A.K. Bhaduri, and J.B. Gnanamoorthy: Mater. Sci. Technol., 1990, vol. 6, pp. 475–81.10.1179/mst.1990.6.5.475 ↗
13. D. Nakhaie and M.H. Moayed: Corros. Sci., 2014, vol. 80, pp. 290–98.10.1016/j.corsci.2013.11.039 ↗
14. S.S.M. Tavares, J.M. Pardal, T.R.B. Martins, and M.R. da Silva: J. Mater. Eng. Perform., 2017, vol. 26, pp. 2512–19.10.1007/s11665-017-2693-8 ↗
15. A. Szewczyk-Nykiel and J. Kazior: J. Mater. Eng. Perform., 2017, vol. 26, pp. 3450–56.10.1007/s11665-017-2778-4 ↗
16. M. Lara-Banda, C. Gaona-Tiburcio, P. Zambrano-Robledo, M. Delgado-E, J.A. Cabral-Miramontes, D. Nieves-Mendoza, E. Maldonado-Bandala, F. Estupiñan-López, J.G. Chacón-Nava, and F. Almeraya-Calderón: Materials (Basel), 2020, vol. 13, p. 2836.10.3390/ma13122836 ↗
17. M.T. Woldemedhin, J. Srinivasan, and R.G. Kelly: J. Solid State Electrochem., 2015, vol. 19, pp. 3449–61.10.1007/s10008-015-2816-9 ↗
18. R. Rana, S.B. Singh, and O.N. Mohanty: Mater. Charact., 2008, vol. 59, pp. 969–74.10.1016/j.matchar.2007.08.008 ↗
19. M.J. Starink, X.G. Qiao, J. Zhang, and N. Gao: Acta Mater., 2009, vol. 57, pp. 5796–11.10.1016/j.actamat.2009.08.006 ↗
20. A. Deschamps, M. Militzer, and W.J. Poole: ISIJ Int., 2003, vol. 43, pp. 1826–32.10.2355/isijinternational.43.1826 ↗
21. X. Chen, D. Kim, O. Minho, C.D. Marioara, S.J. Andersen, A. Lervik, R. Holmestad, and E. Kobayashi: Mater. Sci. Eng. A, 2021, vol. 820, p. 141557.10.1016/j.msea.2021.141557 ↗
22. M.S. Ardakani, E. Mostaed, M. Sikora-Jasinska, S.L. Kampe, and J.W. Drelich: Mater. Sci. Eng. A, 2020, vol. 770, 138529.10.1016/j.msea.2019.138529 ↗
23. N. Srinivasan: Metallogr. Microstruct. Anal., 2021, vol. 10, pp. 133–47.10.1007/s13632-021-00724-y ↗
24. K. Morshed-Behbahani, N. Zakerin, P. Najafisayar, and M. Pakshir: Corros. Sci., 2021, vol. 183, 109340.10.1016/j.corsci.2021.109340 ↗
25. N. Zakerin and K. Morshed-Behbahani: Mater. Today Commun., 2021, vol. 27, 102327.10.1016/j.mtcomm.2021.102327 ↗
26. N. Zakerin and P. Najafisayar: J. Mater. Res. Technol., 2020, vol. 9, pp. 14990–15000.10.1016/j.jmrt.2020.10.077 ↗
27. ASTM E92-17: Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials, ASTM International, 2017. https://doi.org/10.1520/E0092-1710.1520/E0092-17 ↗
28. T. Shibata: Corros. Sci., 1990, vol. 31, pp. 413–23.10.1016/0010-938X(90)90140-Z ↗
29. P.C. Pistorius and G.T. Burstein: Philos. Trans. R. Soc. A Math. Phys. Eng. Sci., 1992, vol. 341, pp. 531–59.
30. T. Shintani and Y. Murata: Acta Mater., 2011, vol. 59, pp. 4314–22.10.1016/j.actamat.2011.03.055 ↗
31. D. Nakhaie and M.H. Moayed: ECS Meet. Abstr., 2013, vol. MA2013-01, pp. 683–83.10.1149/MA2013-01/14/683 ↗
32. F. Sato and R.C. Newman: Corrosion, 1998, vol. 54, pp. 955–63.10.5006/1.3284817 ↗
33. Y. Kim and R.G. Buchheit: Electrochim. Acta, 2007, vol. 52, pp. 2437–46.10.1016/j.electacta.2006.08.054 ↗
34. G.O. Ilevbare and G.T. Burstein: Corros. Sci., 2003, vol. 45, pp. 1545–69.10.1016/S0010-938X(02)00229-9 ↗
35. M. Naghizadeh, D. Nakhaie, M. Zakeri, and M.H.H. Moayed: Corros. Sci., 2015, vol. 94, pp. 420–27.10.1016/j.corsci.2015.02.025 ↗
36. G.O. Ilevbare and G.T. Burstein: Corros. Sci., 2001, vol. 43, pp. 485–513.10.1016/S0010-938X(00)00086-X ↗
37. M.H. Moayed and R.C. Newman: Mater. Corros., 2005, vol. 56, pp. 166–73.10.1002/maco.200403827 ↗
38. P.C. Pistorius and G.T. Burstein: Corros. Sci., 1994, vol. 36, pp. 525–38.10.1016/0010-938X(94)90041-8 ↗
39. D. Nakhaie, M. Zakeri, M. Naghizadeh, A. Clifford, and E. Asselin: J. Electrochem. Soc., 2023, https://doi.org/10.1149/1945-7111/acdcbe.10.1149/1945-7111/acdcbe ↗
40. T.L.S.L. Wijesinghe and D.J. Blackwood: Corros. Sci., 2007, vol. 49, pp. 1755–64.10.1016/j.corsci.2006.10.025 ↗
41. D. Nakhaie, A. Imani, M. Autret, R.F. Schaller, and E. Asselin: Corros. Sci., 2021, vol. 185, 109302.10.1016/j.corsci.2021.109302 ↗
42. N.J. Laycock, M.H. Moayed, and R.C. Newman: J. Electrochem. Soc., 1998, vol. 145, pp. 2622–28.10.1149/1.1838691 ↗
43. M.H. Moayed and R.C. Newman: Corros. Sci., 2006, vol. 48, pp. 1004–1018.10.1016/j.corsci.2005.03.002 ↗
44. Y. Kobayashi, J. Takahashi, and K. Kawakami: Acta Mater., 2019, vol. 176, pp. 145–54.10.1016/j.actamat.2019.06.055 ↗
45. N. Maruyama, M. Sugiyama, T. Hara, and H. Tamehiro: Mater. Trans. JIM, 1999, vol. 40, pp. 268–77.10.2320/matertrans1989.40.268 ↗
46. E.J. Pavlina and C.J. Van Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888–93.10.1007/s11665-008-9225-5 ↗
47. A. Yilmaz, K. Traka, S. Pletincx, T. Hauffman, J. Sietsma, and Y. Gonzalez-Garcia: Corros. Sci., 2021, vol. 182, 109271.10.1016/j.corsci.2021.109271 ↗
48. S.K. Pradhan, P. Bhuyan, and S. Mandal: Corros. Sci., 2019, vol. 158, 108091.10.1016/j.corsci.2019.108091 ↗
49. J.R. Galvele: J. Electrochem. Soc., 1976, vol. 123, p. 464.10.1149/1.2132857 ↗
50. G.S. Frankel, L. Stockert, F. Hunkeler, and H. Boehni: Corrosion, 1987, vol. 43, pp. 429–36.10.5006/1.3583880 ↗
51. G.S. Frankel: J. Electrochem. Soc., 1998, vol. 145, pp. 2186–98.10.1149/1.1838615 ↗
52. M.H. Moayed and R.C. Newman: J. Electrochem. Soc., 2006, vol. 153, p. B330.10.1149/1.2210670 ↗
53. S. Tokuda, I. Muto, Y. Sugawara, and N. Hara: J. Electrochem. Soc., 2021, vol. 168, 091504.10.1149/1945-7111/ac28c6 ↗
54. M.-F. Ng, D.J. Blackwood, H. Jin, and T.L. Tan: J. Phys. Chem. C, 2021, vol. 125, pp. 24189–95.10.1021/acs.jpcc.1c07419 ↗
55. J.H. Park and Y. Kang: Steel Res. Int., 2017, vol. 88, p. 1700130.10.1002/srin.201700130 ↗
56. H. Yu, X. Liu, H. Bi, and L. Chen: J. Mater. Process. Technol., 2009, vol. 209, pp. 455–61.10.1016/j.jmatprotec.2008.02.016 ↗
57. G.S. Eklund: J. Electrochem. Soc., 1974, vol. 121, pp. 467–73.10.1149/1.2401840 ↗
58. D. Kovalov, C.D. Taylor, H. Heinrich, and R.G. Kelly: Corros. Sci., 2022, vol. 199, 110184.10.1016/j.corsci.2022.110184 ↗
59. D.E. Williams, M.R. Kilburn, J. Cliff, and G.I.N. Waterhouse: Corros. Sci., 2010, vol. 52, pp. 3702–16.10.1016/j.corsci.2010.07.021 ↗
60. D.E. Williams, C. Westcott, and M. Fleischmann: J. Electrochem. Soc., 1985, vol. 132, pp. 1796–1804.10.1149/1.2114220 ↗
61. R. Beltran, J.G. Maldonado, L.E. Murr, and W.W. Fisher: Acta Mater., 1997, vol. 45, pp. 4351–60.10.1016/S1359-6454(97)00106-7 ↗