High-temperature Corrosion of ~ 30 Pct Porous FeCr Stainless Steels in Air: Long-Term Evaluation Up to Breakaway
Source abstract
Abstract
Abstract In this work, a long-term (up to 6000 hours) corrosion evaluation of three porous (~ 30 pct of initial porosity) ferritic iron-chromium alloys with different Cr contents (20, 22, and 27 wt pct of Cr) was carried out at 600 °C, 700 °C, 800 °C, and 900 °C in air. Mass gain measurements and SEM analyses revealed that at temperatures above 600 °C, all alloys exhibit breakaway corrosion, whereas at 600 °C, none of the alloys were heavily oxidized even after 6000 hours. Based on the results, the diffusion character of the corrosion of porous chromia-forming alloys was identified. The microstructure changes at high temperatures in porous alloys containing 22 wt pct of Cr were determined in detail by transmission electron microscopy. The proposed prediction model indicated that the lifetimes of the Fe20Cr and Fe22Cr alloys were determined as 1250 hours (± 535 hours) and 1460 hours (± 640 hours), respectively. It is in agreement with the long-term oxidation experiment. For the Fe27Cr alloy, the deviation between predicted and observed lifetimes occurs. The proposed model allows for qualitative estimation of the porous alloys’ lifetime with experimentally validated accuracy.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. J.C.W. Mah, A. Muchtar, M.R. Somalu, and M.J. Ghazali: Int. J. Hydrogen Energy, 2017, vol. 42, pp. 9219–29.10.1016/j.ijhydene.2016.03.195 ↗
2. R. Wang, Z. Sun, J.-P. Choi, S.N. Basu, J.W. Stevenson, and M.C. Tucker: Int. J. Hydrogen Energy, 2019, vol. 44, pp. 25297–25309.10.1016/j.ijhydene.2019.08.041 ↗
3. M.A. Hassan, O. Bin Mamat, and M. Mehdi: Int. J. Hydrogen Energy, 2020, vol. 45, pp. 25191–25209.10.1016/j.ijhydene.2020.06.234 ↗
4. Z. Yang: Int. Mater. Rev., 2008, vol. 53, pp. 39–52.10.1179/174328007X212526 ↗
5. J.A. Glasscock, L. Mikkelsen, Å.H. Persson, G. Pećanac, J. Malzbender, P. Blennow, F. Bozza, and P.V. Hendriksen: Solid State Ionics, 2013, vol. 242, pp. 33–44.10.1016/j.ssi.2013.04.006 ↗
6. Y.H. Xiang, L.Z. Liu, J.C. Shao, and H.J. Jin: Acta Mater., 2020, vol. 186, pp. 105–15.10.1016/j.actamat.2019.12.046 ↗
7. D. Koszelow, M. Makowska, F. Marone, J. Karczewski, P. Jasinski, and S. Molin: Corros. Sci., 2021, vol. 189, 109589.10.1016/j.corsci.2021.109589 ↗
8. Y. Matus, L. Dejonghe, C. Jacobson, and S. Visco: Solid State Ionics, 2005, vol. 176, pp. 443–49.10.1016/j.ssi.2004.09.056 ↗
9. D.N. Boccaccini, H.L. Frandsen, B.R. Sudireddy, P. Blennow, Å.H. Persson, K. Kwok, and P. Vang Hendriksen: Int. J. Hydrogen Energy, 2014, vol. 39, pp. 21569–80.10.1016/j.ijhydene.2014.07.138 ↗
10. G. Reiss, H.L. Frandsen, W. Brandstätter, and A. Weber: J. Power Sources, 2015, vol. 273, pp. 1006–15.10.1016/j.jpowsour.2014.09.185 ↗
11. E. Stefan, C. Denonville, Y. Larring, M. Stange, and R. Haugsrud: Corros. Sci., 2020, vol. 164, 108335.10.1016/j.corsci.2019.108335 ↗
12. M. Mokhtari, T. Wada, C. Le Bourlot, J. Duchet-Rumeau, H. Kato, E. Maire, and N. Mary: Corros. Sci., 2020, vol. 166, 108468.10.1016/j.corsci.2020.108468 ↗
13. S. Molin, B. Kusz, M. Gazda, and P. Jasinski: J. Power Sources, 2008, vol. 181, pp. 31–37.10.1016/j.jpowsour.2007.10.009 ↗
14. X. Cai, Y. Liu, X. Wang, X. Jiao, J. Wang, F. Akhtar, and P. Feng: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2018, vol. 49, pp. 3683–91.10.1007/s11661-018-4680-6 ↗
15. B. Öztürk, A. Topcu, S. Öztürk, and Ö.N. Cora: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 10822–33.10.1016/j.ijhydene.2018.01.078 ↗
16. N.J. Magdefrau, L. Chen, E.Y. Sun, and M. Aindow: J. Power Sources, 2013, vol. 241, pp. 756–67.10.1016/j.jpowsour.2013.03.181 ↗
17. P. Alnegren, M. Sattari, J. Froitzheim, and J.E. Svensson: Corros. Sci., 2016, vol. 110, pp. 200–12.10.1016/j.corsci.2016.04.030 ↗
18. H. Shahbaznejad and H. Ebrahimifar: J. Mater. Sci. Mater. Electron., 2021, vol. 32, pp. 7550–66.10.1007/s10854-021-05470-z ↗
19. W.N. Liu, X. Sun, E. Stephens, and M.A. Khaleel: J. Power Sources, 2009, vol. 189, pp. 1044–50.10.1016/j.jpowsour.2008.12.143 ↗
20. B. Timurkutluk, S. Toros, S. Onbilgin, and H.G. Korkmaz: Int. J. Hydrogen Energy, 2018, vol. 43, pp. 14638–47.10.1016/j.ijhydene.2018.04.243 ↗
21. A. Meharwal, M. Kumar, S.K. Karak, J.D. Majumdar, and I. Manna: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2020, vol. 51, pp. 5257–67.10.1007/s11661-020-05918-7 ↗
22. B.V. Mahesh, R.K. Singh Raman, and C.C. Koch: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2015, vol. 46, pp. 1814–24.10.1007/s11661-015-2765-z ↗
23. V.G. Efremenko, Y.G. Chabak, A. Lekatou, A.E. Karantzalis, and A.V. Efremenko: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2016, vol. 47, pp. 1529–43.10.1007/s11661-016-3336-7 ↗
24. J. Masalski, J. Gluszek, J. Zabrzeski, K. Nitsch, and P. Gluszek: Thin Solid Films, 1999, vol. 349, pp. 186–90.10.1016/S0040-6090(99)00230-8 ↗
25. A.M. Lazar, W.P. Yespica, S. Marcelin, N. Pébère, D. Samélor, C. Tendero, and C. Vahlas: Corros. Sci., 2014, vol. 81, pp. 125–31.10.1016/j.corsci.2013.12.012 ↗
26. G. Ruhi, O.P. Modi, A.S.K. Sinha, and I.B. Singh: Corros. Sci., 2008, vol. 50, pp. 639–49.10.1016/j.corsci.2007.10.002 ↗
27. P. Pavlasek, J. Rybař, S. Ďuriš, and J. Palenčar: Meas. Sci. Rev., 2019, vol. 19, pp. 209–12.10.2478/msr-2019-0027 ↗
28. A. Holt and P. Kofstad: Solid State Ionics, 1994, vol. 69, pp. 137–43.10.1016/0167-2738(94)90402-2 ↗
29. P. Huczkowski, V. Shemet, J. Piron-Abellan, L. Singheiser, W.J. Quadakkers, and N. Christiansen: Mater. Corros., 2004, vol. 55, pp. 825–30.10.1002/maco.200303798 ↗
30. C. Asensio-Jimenez, L. Niewolak, H. Hattendorf, B. Kuhn, P. Huczkowski, L. Singheiser, and W.J. Quadakkers: Oxid. Met., 2013, vol. 79, pp. 1–4.10.1007/s11085-012-9323-5 ↗
31. M.C. Tucker: Int. J. Hydrogen Energy, 2020, vol. 45, pp. 24203–18.10.1016/j.ijhydene.2020.06.300 ↗
32. P. Huczkowski, N. Christiansen, V. Shemet, J. Piron-Abellan, L. Singheiser, and W.J. Quadakkers: J. Fuel Cell Sci. Technol., 2004, vol. 1, pp. 30–34.10.1115/1.1782925 ↗
33. D. Koszelow, S. Molin, J. Karczewski, F. Marone, and M. Makowska: Mater. Des., 2022, vol. 215, 110492.10.1016/j.matdes.2022.110492 ↗
34. A.W.B. Skilbred and R. Haugsrud: J. Power Sources, 2012, vol. 206, pp. 70–76.10.1016/j.jpowsour.2012.01.101 ↗
35. J.W. Fergus: Mater. Sci. Eng. A, 2005, vol. 397, pp. 271–83.10.1016/j.msea.2005.02.047 ↗
36. Y. Wang, Y. Liu, H. Tang, W. Li, and C. Han: Trans. Nonferrous Met. Soc. China (English Ed.), 2017, vol. 27, pp. 1558–68.10.1016/S1003-6326(17)60177-8 ↗
37. B. Talic, S. Molin, P.V. Hendriksen, and H.L. Lein: Corros. Sci., 2018, vol. 138, pp. 189–99.10.1016/j.corsci.2018.04.016 ↗
38. M. Palcut, L. Mikkelsen, K. Neufeld, M. Chen, R. Knibbe, and P.V. Hendriksen: Corros. Sci., 2010, vol. 52, pp. 3309–20.10.1016/j.corsci.2010.06.006 ↗
39. B. Mortimer, P. Grieveson, and K.H. Jack: Scand. J. Metall., 1972, vol. 1, pp. 203–09.
40. G. Miyamoto, A. Yonemoto, Y. Tanaka, T. Furuhara, and T. Maki: Acta Mater., 2006, vol. 54, pp. 4771–79.10.1016/j.actamat.2006.06.006 ↗
41. M. Bianco, S. Poitel, J.E. Hong, S. Yang, Z.J. Wang, M. Willinger, R. Steinberger-Wilckens, and J. Van Herle: Corros. Sci., 2020, vol. 165, 108414.10.1016/j.corsci.2019.108414 ↗