journal article·2022-07

Unveiling the Mechanism of Improved Oxidation Resistance for CaO Crucible Melting Using Ni-Al Alloy

Chihiro Tabata, Kyoko Kawagishi, Jun Uzuhashi, Tadakatsu Ohkubo, Tadaharu Yokokawa, Hiroshi Harada, Shinsuke Suzuki

Publisher page

Abstract

Melting the ingot or alloy using a CaO crucible is a method known to substantially improve the oxidation resistance of superalloys. But the mechanism is unclear due to the lack of investigation on the inclusions that supposedly prevent S segregation at the oxide/substrate interface, which suppress oxide spallation. To clarify the reaction during the melting process, simplified binary Ni-9.8 wt pct Al single-crystal alloys were cast via melting in both an Al2O3 crucible and a CaO crucible. Cyclic oxidation tests were done on both samples at 1100 °C to compare the oxidation resistance between these samples. Samples were also oxidized at 1100 °C only for 1 hour to investigate the inclusions found within the substrate melted in a CaO crucible using aberration-corrected scanning transmission electron microscope with energy-dispersive X-ray spectroscopy (STEM-EDS). Crystalline CaS and MgAl2O4 inclusions were found near the sub-grain boundary of the sample. This finding proved that the Ca from the CaO crucible reacts with S in the melt to form CaS, preventing S from segregating at the oxide/substrate interface.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. N. Birks, G.H. Meier, and F.S. Pettit: Introduction to the High-Temperature Oxidation of Metals, 2nd ed. Cambridge University Press, New York, 2006, pp. 144–48.10.1017/CBO9781139163903 ↗
2. M.A. Smith, W.E. Frazier, and B.A. Pregger: Mat. Sci. Eng. A., 1995, vol. 203, pp. 388–98.10.1016/0921-5093(95)09819-4 ↗
3. D.W. Yun, S.M. Seo, H.W. Jeong, and Y.S. Yoo: Corr. Sci., 2015, vol. 90, pp. 392–401.10.1016/j.corsci.2014.10.030 ↗
4. J.L. Smialek and B.A. Pint: Mat. Sci. Forum., 2001, vol. 369–372, pp. 459–66.10.4028/www.scientific.net/MSF.369-372.459 ↗
5. E. Fedorova, D. Monceau, and D. Oquab: Corr. Sci., 2010, vol. 52, pp. 3932–42.10.1016/j.corsci.2010.08.013 ↗
6. T. Miyahara, K. Stolt, D.A. Reed, and H.K. Birnbaum: Scr. Mater., 1985, vol. 19, pp. 117–21.
7. J. Smialek: Crystal., 2021, vol. 11, pp. 60–71.10.3390/cryst11010060 ↗
8. P.Y. Hou: Annu. Rev. Mater. Res., 2008, vol. 38, pp. 275–98.10.1146/annurev.matsci.38.060407.130323 ↗
9. K.M. Carling and E.A. Carter: Acta Mater., 2007, vol. 55, pp. 2791–803.10.1016/j.actamat.2006.12.020 ↗
10. H.E. Evans: Oxid. Met., 2013, vol. 79, pp. 3–14.10.1007/s11085-012-9322-6 ↗
11. H. Harada, K. Kawagishi, T. Kobayashi, T. Yokokawa, M. Osawa, M. Yuyama, S. Suzuki, Y. Joh, and S. Utada: US Patent, patent number 10689741 (2020.06.23)
12. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Superalloys., 2016, vol. 2016, pp. 591–99.
13. T. Sugiyama, S. Utada, T. Yokokawa, M. Osawa, K. Kawagishi, S. Suzuki, and H. Harada: Met. Mat. Trans. A., 2019, vol. 50, pp. 3903–11.10.1007/s11661-019-05297-8 ↗
14. C. Tabata, K. Kawagishi, J. Uzuhashi, T. Ohkubo, K. Hono, T. Yokokawa, H. Harada, and S. Suzuki: Scr. Mater., 2021, vol. 194, p. 113616.10.1016/j.scriptamat.2020.11.003 ↗
15. Y. Azakli, K.O. Gunduz, S. Cengiz, Y. Gencer, and M. Tarakci: Oxid. Met., 2021, vol. 95, pp. 135–56.10.1007/s11085-020-10018-3 ↗
16. J.J. de Barbadillo: Superalloys 1976, Seven Springs, Champion, PA, 1976, pp. 95–107.
17. K.T. Chiang, G.H. Meier, and R.A. Perkins: J. Mater. Energ. Syst., 1984, vol. 6, pp. 71–86.10.1007/BF02833417 ↗
18. T. Gheno, G.H. Meier, and B. Gleeson: Oxid. Met., 2015, vol. 84, pp. 185–209.10.1007/s11085-015-9550-7 ↗
19. T. Gheno and B. Gleeson: Oxid. Met., 2017, vol. 87, pp. 249–70.10.1007/s11085-016-9669-1 ↗
20. P.V. Mohan Rao, K. Satyanarayana Murthy, S.V. Suryanarayana, and S.V. Nagender Naidu: Phys. Status Solidi A., 1992, vol. 133, pp. 231–35.10.1002/pssa.2211330203 ↗
21. B.T. Collins and M. Ling: J. Electrochem. Soc., 1993, vol. 140, pp. 1752–55.10.1149/1.2221636 ↗
22. A. Nakatsuka, H. Ueno, N. Nakayama, T. Mizota, and H. Maekawa: Phys. Chem. Miner., 2004, vol. 31, pp. 278–87.10.1007/s00269-004-0385-z ↗
23. R.J. Fruehan: Metall. Trans. B., 1978, vol. 9B, pp. 287–92.10.1007/BF02653694 ↗
24. T. Degawa and T. Ototani: Tetsu-to-Hagané., 1987, vol. 73, pp. 1684–90.10.2355/tetsutohagane1955.73.14_1684 ↗
25. S. Utada, Y. Joh, M. Osawa, T. Yokokawa, T. Sugiyama, T. Kobayashi, K. Kawagishi, S. Suzuki, and H. Harada: Met. Mat. Trans. A., 2018, vol. 49A, pp. 4029–41.10.1007/s11661-018-4710-4 ↗
26. Y. Kishimoto, T. Kono, T. Horie, T. Yokokawa, M. Osawa, K. Kawagishi, S. Suzuki, and H. Harada: Met. Mat. Trans. B., 2021, vol. 52B, pp. 1450–62.10.1007/s11663-021-02112-x ↗
27. J. Yang, M. Kuwabara, Z. Liu, T. Asano, and M. Sano: Tetsu-to-Hagané, 2006, vol. 92, pp. 239–45.10.2355/tetsutohagane1955.92.4_239 ↗
28. T. Yokokawa, H. Harada, K. Kawagishi, M. Sakamoto, M. Osawa, Y. Takata, M. Yuyama, T. Kobayashi, T. Sugiyama, and S. Suzuki: Superalloys 2020, TMS. Seven Springs, Champion, PA, 2020, pp. 400–407.10.1007/978-3-030-51834-9_39 ↗
29. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak: Binary Alloy Phase Diagrams, 2nd ed. OH, ASM International, Materials Park, 1990, p. 183, 937, 949, 2852.
30. L.R. Ping, A.M. Azad, and T.W. Dung: Mater. Res. Bull., 2001, vol. 36, pp. 1417–30.10.1016/S0025-5408(01)00622-5 ↗
31. J.F. Elliot and M. Gleiser: Thermochemistry for Steelmaking, vol. 1, Addison-Wesley, London, 1960.
32. S. Nagasaki: Metals Databook, 3rd ed. Japan Institute of Metals and Materials, Sendai, 1993, pp. 96–97.
33. I. Barin: Thermochemical Data of Pure Substances, 3rd ed. VCH Verlagsgesellschaft mbH Weinheim and VCH Publishers Inc, New York, 1995, pp. 48, 440, 480.10.1002/9783527619825 ↗