journal article·2020-12

Effect of Prior Plastic Deformation on the α-Cr Precipitation in a Binary Ni-Cr Alloy

N. Keskar, K. V. Mani Krishna, R. Tewari

Publisher page

Abstract

The effect of prior plastic deformation on the discontinuous precipitation in a supersaturated binary Ni-Cr alloy (42 wt pct Cr) was investigated. Solutionised samples were cold rolled to different extents of reduction (20, 50 and 70 pct) and then subjected to aging heat treatments in the temperature range of 923 K to 1123 K (650 °C to 850 °C) for different time periods, resulting in the precipitation of α-Cr in various morphologies. The α-Cr precipitates were in the form of lamellar discontinuous precipitation, acicular continuous precipitation along the deformation bands, globularization and equiaxed precipitation concurrently with matrix recrystallization. The volume fraction of each morphology varied according to the heat treatments. Overall, the prior plastic deformation had a retarding effect on the kinetics of discontinuous precipitation and accelerated the kinetics of continuous precipitation. The retardation of discontinuous precipitation was attributed to the loss of supersaturation of the matrix due to the other competing modes of precipitation supported by deformation. Plastic deformation prior to aging is shown to be a possible route for engineering the microstructure in this alloy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. J.H. Chen, P.M. Rogers, and J.A. Little: Oxid. Met., 1997, vol. 47, pp. 381–410.10.1007/BF02134783 ↗
2. C.S. Giggins and F. Pettit: Trans. TMS AIME, 1969, vol. 245, p. 2495.
3. G.M. Ecer and G.H. Meier: Oxid. Met., 1979, vol. 13, pp. 119–158.10.1007/BF00611976 ↗
4. N Keskar, AK Pattanaik, KM Krishna, D Srivastava, GK Dey (2017) Metall. Mater. Trans. A, 48: 3096–3107.10.1007/s11661-017-4066-1 ↗
5. J.W. Christian: in The Theory of Transformations in Metals and Alloys, J.W. Christian, ed., Pergamon, Oxford, 2002, pp. 718–96.10.1016/B978-008044019-4/50021-0 ↗
6. C.P. Luo and G.C. Weatherly: Acta Metall., 1987, vol. 35, pp. 1963–72.10.1016/0001-6160(87)90025-3 ↗
7. P. Nash: Bull. Alloy Phase Diagr., 1986, vol. 7, pp. 466–476.10.1007/BF02867812 ↗
8. D. Turnbull: Acta Metall., 1955, vol. 3, pp. 55–63.10.1016/0001-6160(55)90012-2 ↗
9. D.B. Williams and E.P. Butler: Int. Met. Rev., 1981, vol. 26, pp. 153–83.10.1179/imr.1981.26.1.153 ↗
10. K.N. Tu and D. Turnbull: Acta Metall., 1967, vol. 15, pp. 369–376.10.1016/0001-6160(67)90214-3 ↗
11. N. Saheb, Z. Boumerzoug, D. Hamana, T. Laoui, and O. Van Der Biest: Scr. Metall. Mater., 1995, vol. 32, pp. 1453–1458.10.1016/0956-716X(95)00187-Z ↗
12. M. Kitada and T. Doi: J Jpn. INST Met., 1970, vol. 34, pp. 365–369.10.2320/jinstmet1952.34.4_365 ↗
13. H. Borchers and H. Schulz: Z. Met., 1975, vol. 66, pp. 525–533.
14. A. Pawłowski: Scr. Metall., 1979, vol. 13, pp. 791–4.10.1016/0036-9748(79)90160-1 ↗
15. R. Monzen, T. Hasegawa, and C. Watanabe: Philos. Mag., 2010, vol. 90, pp. 1347–1358.10.1080/14786430903352631 ↗
16. R. Monzen, T. Terazawa, and C. Watanabe: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1936–1941.10.1007/s11661-010-0244-0 ↗
17. H.-P. Ng, C.J. Bettles, and B.C. Muddle: J. Alloys Compd., 2011, vol. 509, pp. 1582–1589.10.1016/j.jallcom.2010.10.167 ↗
18. P. Yang, L. Wang, Q. Xie, J. Li, H. Ding, and L. Lu: Int. J. Miner. Metall. Mater., 2011, vol. 18, pp. 338–343.10.1007/s12613-011-0444-7 ↗
19. Z. Wendorff and A. Blaszczyk: Met. Technol., 1981, vol. 8, pp. 67–74.10.1179/030716981803275370 ↗
20. Z. Boumerzoug, L. Boudhib, and A. Chala: J Mater Sci, 2005, vol. 40, pp. 3199–3203.10.1007/s10853-005-2684-2 ↗
21. D.A. Porter, K.E. Easterling, and M. Sherif: Phase Transformations in Metals and Alloys (Revised Reprint), CRC Press, Boca Raton, 2009.10.1201/9781439883570 ↗
22. E. Hornbogen: Metall. Mater. Trans. B, 1972, vol. 3, pp. 2717–2727.10.1007/BF02652839 ↗
23. H. Kitaguchi: Metall. Adv. Mater. Process. 10.5772/52011.
24. T.C. Lowe and R.Z. Valiev: JOM, 2000, vol. 52, pp. 27–8.10.1007/s11837-000-0127-8 ↗
25. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
26. T.C. Lowe and R.Z. Valiev: Investigations and Applications of Severe Plastic Deformation, vol. 80, Springer Science & Business Media, Berlin 2012.
27. R. Valiev: Nat. Mater., 2004, vol. 3, pp. 511–516.10.1038/nmat1180 ↗
28. V.M. Miller, A.E. Johnson, C.J. Torbet, and T.M. Pollock: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1566–1574.10.1007/s11661-016-3329-6 ↗
29. C.P. Blankenship, M.F. Henry, J.M. Hyzak, R. Rohling, and E.L. Hall: 1966.
30. M. Dahlen and L. Winberg: Acta Metall., 1980, vol. 28, pp. 41–50.10.1016/0001-6160(80)90039-5 ↗
31. N. Bozzolo, A. Agnoli, N. Souai, M. Bernacki, and R.E. Logé: in Materials Science Forum, vol. 753, Trans Tech Publ, 2013, pp. 321–24.10.4028/www.scientific.net/MSF.753.321 ↗
32. A. Agnoli, M. Bernacki, R.E. Logé, J.-M. Franchet, J. Laigo, and N. Bozzolo: 2012, pp. 73–82.10.1002/9781118516430.ch8 ↗
33. E. Huron, S. Srivatsa, and E. Raymond: Superalloys, 2000, pp. 49–58.10.7449/2000/Superalloys_2000_49_58 ↗
34. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2008.
35. K.R. Bain, M.L. Gambone, J.M. Hyzak, and M.C. Thomas: 1988.
36. O.N. Senkov, F.H. Froes, V.V. Stolyarov, R.Z. Valiev, and J. Liu: Nanostructured Mater., 1998, vol. 10, pp. 691–698.10.1016/S0965-9773(98)00107-X ↗
37. M. Murayama, K. Hono, and Z. Horita: Mater. Trans. JIM, 1999, vol. 40, pp. 938–941.10.2320/matertrans1989.40.938 ↗
38. J.K. Kim, H.G. Jeong, S.I. Hong, Y.S. Kim, and W.J. Kim: Scr. Mater., 2001, vol. 45, pp. 901–907.10.1016/S1359-6462(01)01109-5 ↗
39. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, and Y.T. Zhu: Acta Mater., 2004, vol. 52, pp. 4589–4599.10.1016/j.actamat.2004.06.017 ↗
40. B.K. Kad and P.M. Hazzledine: Mater. Sci. Eng. A, 1997, vol. 238, pp. 70–77.10.1016/S0921-5093(97)00435-8 ↗
41. S.P. Ringer, W.-B. Li, and K.E. Easterling: Acta Metall., 1989, vol. 37, pp. 831–841.10.1016/0001-6160(89)90010-2 ↗
42. C.R. Hutchinson, H.S. Zurob, C.W. Sinclair, and Y.J. Brechet: Scr. Mater., 2008, vol. 59, pp. 635–637.10.1016/j.scriptamat.2008.05.036 ↗
43. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–675.10.1038/nmeth.2089 ↗
44. I. Manna, S.K. Pabi, and W. Gust: Acta Metall. Mater., 1991, vol. 39, pp. 1489–96.10.1016/0956-7151(91)90234-R ↗
45. K. Lücke: Z. Für Met., 1975, vol. 66, p. 448.
46. H.I. Aaronson and Y.C. Liu: Scr. Metall., 1968, vol. 2, pp. 1–7.10.1016/0036-9748(68)90157-9 ↗
47. J. Petermann and E. Hornbogen: Z Met., 1968, vol. 59, pp. 814–822.
48. J.K. Chen, D. Farkas, and W.T. Reynolds: Acta Mater., 1997, vol. 45, pp. 4415–21.10.1016/S1359-6454(97)00159-6 ↗
49. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
50. D. Duly, J.P. Simon, and Y. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 101–106.
51. P. Zieba: Arch. Metall. Mater., 2017, vol. 62, pp. 955–68.10.1515/amm-2017-0138 ↗
52. Q. Dong, A. Howells, D.J. Lloyd, M. Gallerneault, and V. Fallah: Mater. Sci. Eng. A, 2020, vol. 772, p. 138693.10.1016/j.msea.2019.138693 ↗
53. H. Borchers and H. Schulz: Acta Metall., 1976, vol. 24, pp. 639–650.10.1016/0001-6160(76)90084-5 ↗
54. H.P. Ng, P. Nandwana, A. Devaraj, M. Semblanet, S. Nag, P.N.H. Nakashima, S. Meher, C.J. Bettles, M.A. Gibson, H.L. Fraser, B.C. Muddle, and R. Banerjee: Acta Mater., 2015, vol. 84, pp. 457–71.10.1016/j.actamat.2014.10.053 ↗
55. R.W. Balluffi: Metall. Trans. B, 1982, vol. 13, pp. 527–553.10.1007/BF02650011 ↗
56. D. Terentyev, F. Bergner, and Y. Osetsky: Acta Mater. 2012. 10.1016/j.actamat.2012.11.021.10.1016/j.actamat.2012.11.021 ↗
57. M.F. Chisholm and S.J. Pennycook: Philos. Mag., 2006, vol. 86, pp. 4699–725.10.1080/14786430600778757 ↗
58. X. Wu, S.K. Makineni, C.H. Liebscher, G. Dehm, J. Rezaei Mianroodi, P. Shanthraj, B. Svendsen, D. Bürger, G. Eggeler, D. Raabe, and B. Gault: Nat. Commun., 2019, 10.1038/s41467-019-14062-9.
59. M.J. Jones and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 2149–2159.10.1016/S1359-6454(03)00002-8 ↗
60. G. Kurdjumow and G. Sachs: Z. Für Phys., 1930, vol. 64, pp. 325–343.10.1007/BF01397346 ↗
61. P. Jakupi, J.J. Noël, and D.W. Shoesmith: Electrochem. Solid-State Lett., 2010, vol. 13, pp. C1–C3.10.1149/1.3272851 ↗
62. N. Ebrahimi, P. Jakupi, A. Korinek, I. Barker, D.E. Moser, and D.W. Shoesmith: J. Electrochem. Soc., 2016, vol. 163, pp. C232–C239.10.1149/2.1111605jes ↗
63. C. Hu, S. Xia, H. Li, T. Liu, B. Zhou, W. Chen, and N. Wang: Corros. Sci., 2011, vol. 53, pp. 1880–1886.10.1016/j.corsci.2011.02.005 ↗
64. V.Y. Gertsman and S.M. Bruemmer: Acta Mater., 2001, vol. 49, pp. 1589–1598.10.1016/S1359-6454(01)00064-7 ↗