Multi-axial Fatigue of Head-Hardened Pearlitic and Austenitic Manganese Railway Steels: A Comparative Study
Source abstract
Abstract
Switches and crossings (S&Cs) in rail networks suffer from damage and deformation due to severe loading of their complex geometric shapes. This article presents a comparative study of the cyclic deformation characteristics and fatigue behavior of two typical crossing materials, namely head-hardened pearlitic steel and Hadfield manganese steel, as well as the associated microstructural changes. Both uniaxial and biaxial loadings (proportional and non-proportional) are studied. The pearlitic steel endured more cycles to failure for a given strain amplitude compared to the manganese steel. The cyclic response of manganese steel shows significant hardening whereas softening was observed for the pearlitic steel except under biaxial non-proportional loading. The microstructures developed in the two types of steels after deformation are characterized by optical (OM) and transmission electron microscopy (TEM). TEM micrographs reveal that the deformed microstructure of the pearlitic steel consists of threading dislocations and dislocation tangles in the ferrite lamellae. The microstructures in the manganese steel after the different loadings are composed of dislocation cells with dislocation tangles inside, intersected by straight stacking fault lamellae. The observed microstructures are related to the results of the mechanical test, and the suitability of the steels for use in S&Cs is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Railway Engineering and Dynamics · Mechanical stress and fatigue analysis · Structural Load-Bearing Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. [1] A. V. Olver: Proceedings of the Institution of Mechanical Engineers, Part J: J. of Tribol., 2005, vol. 219, pp. 313-30.10.1243/135065005X9808 ↗
2. [2] D. L. McDowell: Int. J. Plast., 1995, vol. 11(4), pp. 397-421.10.1016/S0749-6419(95)00005-4 ↗
3. [3] R. I. Stephens, A. Fatemi, R. R. Stephens and H. O. Fuchs: Metal fatigue in engineering, John Wiley and Sons, New Jersey, NJ, 2001.
4. [4] E. G. Astafurova, M. S. Tukeeva, G. G. Zakharova, E. V. Melnikov and H. J. Maier: Mater. Charact., 2011, vol. 62, pp. 588-92.10.1016/j.matchar.2011.04.010 ↗
5. [5] C. Efstathiou and H. Sehitoglu: Acta Mater., 2010, vol. 58, pp. 1479-88.10.1016/j.actamat.2009.10.054 ↗
6. [6] I. Karaman, H. Sehitoglu, Y. I. Chumlyakov and H. J. Maier: Act. Mater., 2000, vol. 48(6), pp. 1345-59.10.1016/S1359-6454(99)00383-3 ↗
7. [7] W. S. Owen and M. Grujicic: Act. Mater., 1999, vol. 47, pp. 111-26.10.1016/S1359-6454(98)00347-4 ↗
8. [8] P. H. Adler, G. B. Olson and W. S. Owen: Metall. Trans. A, 1986, vol. 17, pp. 1725-37.10.1007/BF02817271 ↗
9. [9] J. Kang, F. C. Zhang, X. Y. Long and B. Lv: Mater. Sci. Eng. A, 2014, vol. 591, pp. 59-68.10.1016/j.msea.2013.10.072 ↗
10. [10] D. Rittel and I. Roman: Int. J. Fatigue, 1989, vol. 11(3), pp. 177-82.10.1016/0142-1123(89)90437-4 ↗
11. [11] M. Schilke, J. Ahlström and B. Karlsson: Procedia Eng., 2010, vol. 2, pp. 623-28.10.1016/j.proeng.2010.03.067 ↗
12. [12] C. Chen, B. Lv, F. Wang and F. Zhang: Mater. Sci. Eng. A, 2017, vol. 695, pp. 144-53.10.1016/j.msea.2017.03.107 ↗
13. Jiang Y, Sehitoglu H (1999) Wear 224:38-4910.1016/S0043-1648(98)00311-1 ↗
14. Glaeser WA, Shaffer SJ (1996) ASM Handbook: Fatigue and Fracture, vol 19. ASM International, Materials Park, OH, pp 331-33610.31399/asm.hb.v19.a0002373 ↗
15. [15] J. Ahlstrom and B. Karlsson: Wear, 2005, vol. 258, pp. 1187-93.10.1016/j.wear.2004.03.030 ↗
16. [16] P. P. Sarkar, P. S. De, S. K. Dhua and P. C. Chakraborti: Mater. Sci. Eng. A,2017, vol. 707, pp. 125-35.10.1016/j.msea.2017.09.035 ↗
17. [17] G. Kang, Q. Gao and X. Yang: Int. J. Mech. Sci., 2002, vol. 44, pp. 1647-63.10.1016/S0020-7403(02)00062-0 ↗
18. [18] A. Athukorala, D. V. De Pellegrin and K. I. Kourousis: Wear, 2016, vol. 366-367, pp. 416-24.10.1016/j.wear.2016.03.024 ↗
19. [19] H. Sunwoo, M. E. Fine, M. Meshil and D.H. Stone: Metall. Trans. A, 1982, vol. 13A, pp. 2035-47.10.1007/BF02645949 ↗
20. [20] C. L. Pun, Q. Kan, P. J. Mutton, G. Kang and W. Yan: Int. J. Fatigue, 2014, vol. 66, pp. 138-54.10.1016/j.ijfatigue.2014.03.021 ↗
21. [21] G. Kang and Q. Gao: Mech. Mater., 2002, vol. 34, pp. 809-20.10.1016/S0167-6636(02)00198-9 ↗
22. Kang G, Gao Q, Cai L, Sun Y, Yang X (2002) Mater Sci Technol 18:13-1610.1179/026708301125000159 ↗
23. Dhar S, Danielsen HK, Fæster S, Rasmussen C, Zhang Y, Juul Jensen D (2019) Wear 438–439:20304910.1016/j.wear.2019.203049 ↗
24. ASTM E606/E606M-19e1, Standard Test Method for Strain-Controlled Fatigue Testing, ASTM International, West Conshohocken, PA, 2019. www.astm.org.
25. X. Zhang, A. Godfrey, X. Huang, N. Hansen, W. Liu, and Q. Liu: Proc. 30th Risø Int. Symp. Mater. Sci. Nanostruct. Met.: Fundam. Appl., 2009, pp. 409–16.
26. [26] X. Zhang, N. Hansen, A. Godfrey and X. Huang: Acta Mater., 2013, vol. 114, pp. 176-83.10.1016/j.actamat.2016.04.040 ↗
27. [28] N. Shamsei, A. Fatemi and F. D. Socie: Int. J. Plast., 2010, vol. 26(12), pp. 1680-1701.10.1016/j.ijplas.2010.02.006 ↗
28. J. Morrow: Cyclic Plastic Strain Energy and Fatigue of Metals, Internal Friction, Damping and Cyclic Plasticity, ASTM International STP378-EB, West Conshohocken, PA, 1965, pp. 45–87.10.1520/STP43764S ↗
29. H. Christ: ASM Handbook: Fatigue and Fracture, 1996, vol. 19, pp. 73–95. https://doi.org/10.31399/asm.hb.v19.a0002354.10.31399/asm.hb.v19.a0002354 ↗
30. [31] R. Branco, P.A. Prates, J. D. Costa, L.P. Borrego, F. Berto, A. Kotousov and F.V. Antunes; Int. J. Fatigue, 2019, vol. 124, pp. 89-98.10.1016/j.ijfatigue.2019.02.005 ↗
31. [32] R. Branco, J. D. Costa, F. Berto, and F.V. Antunes; Theor. Appl. Fract. Mec., 2018, vol. 97, pp 340-348.10.1016/j.tafmec.2017.06.003 ↗
32. [33] X. Zhang, A. Godfrey, X. Huang, N. Hansen and Q. Liu: Acta Mater., 2011, vol. 59, pp. 3422-30.10.1016/j.actamat.2011.02.017 ↗
33. [34] X. Zhang, A. Godfrey, N. Hansen and X. Huang: Acta Mater., 2016, vol. 61, pp. 4898-4909.10.1016/j.actamat.2013.04.057 ↗
34. [35] M. Dollar, I. M. Bernstein and A. W. Thompson, Acta Metall., 1988, vol. 36, pp. 311-20.10.1016/0001-6160(88)90008-9 ↗
35. [36] S. A. Hackney and G. J. Shiflet: Scr. Mater., 1986, vol. 20, pp. 389-394.10.1016/0036-9748(86)90164-X ↗
36. [37] X. Zhang, N. Hansen, A. Godfrey and X. Huang: Mater. Sci. Technol., 2018, vol. 34, pp. 794–808.10.1080/02670836.2018.1440155 ↗
37. Barlat F, Ferreira Duarte JM, Gracio JJ, Lopes AB, Rauch EF (2003) Int J Plast 19:1215-4410.1016/S0749-6419(02)00020-7 ↗
38. Vergnol JFM, Grilhe JR (1984) J Phys 45:1479-9010.1051/jphys:019840045090147900 ↗