journal article·2024-12

The Challenge and Progress in Macro- and Micro-modeling and Simulation of Squeeze Casting Process

Jiale Ma, Zhiqiang Han, Anil K. Sachdev, Alan A. Luo

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. W. Zhang and J. Xu: Mater. Des., 2022, vol. 221, p. 110994. https://doi.org/10.1016/j.matdes.2022.110994.10.1016/j.matdes.2022.110994 ↗
2. D. Blanco, E.M. Rubio, R.M. Lorente-Pedreille, and M.A. Sáenz-Nuño: Materials, 2021, vol. 14, p. 6577. https://doi.org/10.3390/ma14216577.10.3390/ma14216577 ↗
3. A.A. Luo, A.K. Sachdev, and D. Apelian: J. Mater. Process. Technol., 2022, vol. 306, p. 117606. https://doi.org/10.1016/j.jmatprotec.2022.117606.10.1016/j.jmatprotec.2022.117606 ↗
4. M.R. Ghomashchi and A. Vikhrov: J. Mater. Process. Technol., 2000, vol. 101, pp. 1–9. https://doi.org/10.1016/S0924-0136(99)00291-5.10.1016/S0924-0136(99)00291-5 ↗
5. J. Allison, D. Backman, and L. Christodoulou: JOM, 2006, vol. 58, pp. 25–27. https://doi.org/10.1007/s11837-006-0223-5.10.1007/s11837-006-0223-5 ↗
6. A.A. Luo: Calphad, 2015, vol. 50, pp. 6–22. https://doi.org/10.1016/j.calphad.2015.04.002.10.1016/j.calphad.2015.04.002 ↗
7. S.W. Youn, C.G. Kang, and P.K. Seo: J. Mater. Process. Technol., 2004, vol. 146, pp. 294–302. https://doi.org/10.1016/j.jmatprotec.2003.11.005.10.1016/j.jmatprotec.2003.11.005 ↗
8. B.Y. Jiang, J. Zhong, B.Y. Huang, X.H. Qu, and Y.M. Li: J. Mater. Process. Technol., 2003, vol. 137, pp. 74–77. https://doi.org/10.1016/S0924-0136(02)01070-1.10.1016/S0924-0136(02)01070-1 ↗
9. A.S. Usmani, J.T. Cross, and R.W. Lewis: Int. J. Numer. Methods Eng., 1992, vol. 35, pp. 787–806. https://doi.org/10.1002/nme.1620350410.10.1002/nme.1620350410 ↗
10. A.S. Usmani, J.T. Cross, and R.W. Lewis: J. Mater. Process. Technol., 1993, vol. 38, pp. 291–302. https://doi.org/10.1016/0924-0136(93)90203-I.10.1016/0924-0136(93)90203-I ↗
11. R.W. Lewis, A.S. Usmani, and J.T. Cross: Int. J. Numer. Methods FIuids, 1995, vol. 20, pp. 493–506. https://doi.org/10.1002/fld.1650200606.10.1002/fld.1650200606 ↗
12. C.W. Hirt and B.D. Nichols: J. Comput. Phys., 1981, vol. 39, pp. 201–25. https://doi.org/10.1016/0021-9991(81)90145-5.10.1016/0021-9991(81)90145-5 ↗
13. K. Ravindran and R.W. Lewis: Finite Elem. Anal. Des., 1998, vol. 31, pp. 99–116. https://doi.org/10.1016/S0168-874X(98)00053-5.10.1016/S0168-874X(98)00053-5 ↗
14. C.W. Hirt, J.L. Cook, and T.D. Butler: J. Comput. Phys., 1970, vol. 5, pp. 103–24. https://doi.org/10.1016/0021-9991(70)90055-0.10.1016/0021-9991(70)90055-0 ↗
15. I. Malcevic and O. Ghattas: Finite Elem. Anal. Des., 2002, vol. 38, pp. 965–82. https://doi.org/10.1016/S0168-874X(02)00088-4.10.1016/S0168-874X(02)00088-4 ↗
16. M. Souli and J.P. Zolesio: Comput. Method. Appl. Mech. Eng., 2001, vol. 191, pp. 451–66. https://doi.org/10.1016/S0045-7825(01)00313-9.10.1016/S0045-7825(01)00313-9 ↗
17. D.T. Gethin, R.W. Lewis, and M.R. Tadayon: Int. J. Numer. Methods Eng., 1992, vol. 35, pp. 939–50. https://doi.org/10.1002/nme.1620350418.10.1002/nme.1620350418 ↗
18. R.W. Lewis, Z.Q. Han, and D.T. Gethin: Comptes Rendus Mécanique, 2007, vol. 335, pp. 287–94. https://doi.org/10.1016/j.crme.2007.05.016.10.1016/j.crme.2007.05.016 ↗
19. R.W. Lewis, E.W. Postek, Z.Q. Han, and D.T. Gethin: Int. J. Numer. Methods Heat Fluid, 2006, vol. 16, pp. 539–72. https://doi.org/10.1108/09615530610669102.10.1108/09615530610669102 ↗
20. T. Belytschko: Comput. Struct., 1980, vol. 12, pp. 459–69.10.1016/0045-7949(80)90121-2 ↗
21. G. Hou, J. Wang, and A. Layton: Commun. Comput. Phys., 2012, vol. 12, pp. 337–77. https://doi.org/10.4208/cicp.291210.290411s.10.4208/cicp.291210.290411s ↗
22. F. Cao and Y. Wang: Key Eng. Mater., 2013, vol. 579–580, pp. 220–23. https://doi.org/10.4028/www.scientific.net/KEM.579-580.220.10.4028/www.scientific.net/KEM.579-580.220 ↗
23. R. Kamakoti and W. Shyy: Prog. Aerosp. Sci., 2004, vol. 40, pp. 535–58. https://doi.org/10.1016/j.paerosci.2005.01.001.10.1016/j.paerosci.2005.01.001 ↗
24. J. De Hart, G.W. Peters, P.J. Schreurs, and F.P. Baaijens: J. Biomech., 2003, vol. 36, pp. 103–12. https://doi.org/10.1016/S0021-9290(02)00244-0.10.1016/S0021-9290(02)00244-0 ↗
25. T. Loulou, E.A. Artyukhin, and J.P. Bardon: Int. J. Heat Mass Transf., 1999, vol. 42, pp. 2119–27. https://doi.org/10.1016/S0017-9310(98)00333-0.10.1016/S0017-9310(98)00333-0 ↗
26. T. Loulou, E.A. Artyukhin, and J.P. Bardon: Int. J. Heat Mass Transf., 1999, vol. 42, pp. 2129–42. https://doi.org/10.1016/S0017-9310(98)00338-X.10.1016/S0017-9310(98)00338-X ↗
27. J. Henzel and J. Keverian: Cast Metals Res. J., 1965, vol. 1, pp. 19–36.
28. D.L. Zhang and B. Cantor: Modell. Simul. Mater. Sci. Eng., 1995, vol. 3, p. 121.10.1088/0965-0393/3/1/010 ↗
29. H. Hu and A. Yu: Modell. Simul. Mater. Sci. Eng., 2002, vol. 10, p. 1.10.1088/0965-0393/10/1/301 ↗
30. A. Yu, N. Li, and H. Hu: Multiphase Phenomena and CFD Modeling and Simulation in Materials Processes, 2004, pp. 189–96.
31. Z.Q. Han, W. Zhu, and B.C. Liu: Acta Metall. Sin., 2009, vol. 45, pp. 356–62.
32. W. Zhu, Z.Q. Han, and B.C. Liu: Acta Metall. Sin., 2009, vol. 45, pp. 363–68.
33. Z.Q. Han, W. Zhu, and B.C. Liu: Int. J. Cast Metal. Res., 2009, vol. 22, pp. 119–22. https://doi.org/10.1179/136404609X367498.10.1179/136404609X367498 ↗
34. G.M. Laschet and H. Behnken: IOP Conf. Ser., 2019, vol. 529, p. 012083. https://doi.org/10.1088/1757-899X/529/1/012083.10.1088/1757-899X/529/1/012083 ↗
35. M.R. Brake: Int. J. Solids Struct., 2012, vol. 49, pp. 3129–41. https://doi.org/10.1016/j.ijsolstr.2012.06.013.10.1016/j.ijsolstr.2012.06.013 ↗
36. J.R. Barber: Elasticity. Solid Mechanics and Its Applications, Springer, Cham, 2022, pp. 41–49. https://doi.org/10.1007/978-3-031-15214-6_3.10.1007/978-3-031-15214-6_3 ↗
37. S. Mandal, V. Rakesh, P.V. Sivaprasad, S. Venugopal, and K.V. Kasiviswanathan: Mater. Sci. Eng. A, 2009, vol. 500, pp. 114–21. https://doi.org/10.1016/j.msea.2008.09.019.10.1016/j.msea.2008.09.019 ↗
38. J. Tang, Z.Q. Han, F.F. Wang, J. Sun, and S.X. Xu: Advances in the Science and Engineering of Casting Solidification: An MPMD Symposium Honoring Doru Michael Stefanescu, ed. L. Nastac, L. Baicheng, F. Hasse, L. Jacques, H. Chun-Pyo, V. Catalina Adrian, A. Buhrig-Polaczek, M. Charles, S. Sabau Adrian, R.E.L. Ruxanda, L. Alan, S. Subhayu, and D. Attila. Springer, Cham, 2016, pp. 113–20. https://doi.org/10.1007/978-3-319-48117-3_1410.1007/978-3-319-48117-3_14 ↗
39. J. Tang, F.F. Wang, Z.Q. Han, J. Sun, and S.X. Xu: Spec. Cast. Nonferr. Alloys, 2015, vol. 35, pp. 52–56. https://doi.org/10.15980/j.tzzz.2015.01.015.10.15980/j.tzzz.2015.01.015 ↗
40. P. Krishna: A study of interfacial heat transfer and process parameters in squeeze casting and low pressure permanent mold casting, PhD Thesis, University of Michigan, 2001.
41. X. Z. Zhang: Heat transfer in squeeze casting of light alloys, PhD Thesis, University of Windsor, 2016.
42. E.W. Postek, R.W. Lewis, D.T. Gethin, and R.S. Ransing: J. Mater. Process. Technol., 2005, vol. 159, pp. 338–46. https://doi.org/10.1016/j.jmatprotec.2004.05.022.10.1016/j.jmatprotec.2004.05.022 ↗
43. N. Srivastava and M. Anas: Mater. Today, 2020, vol. 26, pp. 1914–20. https://doi.org/10.1016/j.matpr.2020.02.419.10.1016/j.matpr.2020.02.419 ↗
44. J.W. Li, H.D. Zhao, and C.Z. Wu: Spec. Cast. Nonferr. Alloys, 2014, vol. 34, pp. 269–72.
45. Z.Z. Sun, H. Hu, and X.P. Niu: J. Mater. Process. Technol., 2011, vol. 211, pp. 1432–40. https://doi.org/10.1016/j.jmatprotec.2011.03.014.10.1016/j.jmatprotec.2011.03.014 ↗
46. Z.Z. Sun, H. Hu, and X.P. Niu: Metall. Mater. Trans. B, 2012, vol. 43B, pp. 1676–83. https://doi.org/10.1007/s11663-012-9730-7.10.1007/s11663-012-9730-7 ↗
47. F.F. Wang, K.Y. Wu, X.Y. Wang, and Z.Q. Han: China Foundry, 2017, vol. 14, pp. 327–32. https://doi.org/10.1007/s41230-017-7132-9.10.1007/s41230-017-7132-9 ↗
48. F.F. Wang, Q.X. Ma, W. Meng, and Z.Q. Han: Int. J. Heat Mass Transf., 2017, vol. 112, pp. 1032–43. https://doi.org/10.1016/j.ijheatmasstransfer.2017.05.051.10.1016/j.ijheatmasstransfer.2017.05.051 ↗
49. F.F. Wang, X.Y. Wang, and Z.Q. Han: Int. J. Heat Mass Transf., 2019, vol. 133, pp. 52–61. https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.099.10.1016/j.ijheatmasstransfer.2018.12.099 ↗
50. F.F. Wang, X.T. Zhao, J.H. Liu, Q.X. Ma, J. Sun, S.X. Xu, and Z.Q. Han: Int. J. Therm. Sci., 2020, vol. 152, p. 106300. https://doi.org/10.1016/j.ijthermalsci.2020.106300.10.1016/j.ijthermalsci.2020.106300 ↗
51. E. Niyama, T. Uchida, M. Morikawa, and S. Saito: Int. Cast Met. J., 1982, vol. 7, pp. 52–63.
52. P. Haldar and G. Sutradhar: Cast. Process. Modell. Metall. Mater., 2021, https://doi.org/10.5772/intechopen.94596.10.5772/intechopen.94596 ↗
53. B. Zhou, D. Wu, R. Chen, and E.H. Han: Adv. Eng. Mater., 2019, vol. 21, p. 1900755. https://doi.org/10.1002/adem.201900755.10.1002/adem.201900755 ↗
54. M.C. Manjabacas and V. Miguel: Metals, 2023, vol. 13, p. 1777. https://doi.org/10.3390/met13101777.10.3390/met13101777 ↗
55. H. Hou, H. Ge, Y. Zhao, and W. Yang: Adv. Mater. Res., 2013, vol. 641–642, pp. 309–14. https://doi.org/10.4028/www.scientific.net/AMR.641-642.309.10.4028/www.scientific.net/AMR.641-642.309 ↗
56. C. Beckermann: Encyclopedia of Materials: Science and Technology, 2001, pp. 297–310. https://doi.org/10.1016/B0-08-043152-6/00824-X10.1016/B0-08-043152-6/00824-X ↗
57. C. Beckermann: Int. Mater. Rev., 2002, vol. 47, pp. 243–61. https://doi.org/10.1179/095066002225006557.10.1179/095066002225006557 ↗
58. T. Rølland, R. Schmidt, L. Arnberg, and W. Thorpe: Mater. Sci. Eng. A, 1996, vol. 212, pp. 235–41. https://doi.org/10.1016/0921-5093(96)10209-4.10.1016/0921-5093(96)10209-4 ↗
59. D.J. Britnell and K. Neailey: J. Mater. Process. Technol., 2003, vol. 138, pp. 306–10. https://doi.org/10.1016/S0924-0136(03)00090-6.10.1016/S0924-0136(03)00090-6 ↗
60. Z.Q. Han, J.X. Li, W. Yang, H.D. Zhao, and B.C. Liu: Acta Metall. Sin., 2011, vol. 47, pp. 7–16. https://doi.org/10.3724/SP.J.1037.2010.00313.10.3724/SP.J.1037.2010.00313 ↗
61. M.S. Suzuki, K. Kimura, A. Kawami, and M. Mizutani: Revue De Metallurgie-cahiers D Informations Techniques, 1992, vol. 89, pp. 83–92.10.1051/metal/199289010083 ↗
62. Q.H. Zhou, Y.B. Yin, and J.G. Zhang: Metall. Mater. Trans. B, 2022, vol. 53B, pp. 4029–47. https://doi.org/10.1007/s11663-022-02663-7.10.1007/s11663-022-02663-7 ↗
63. N.F. Zong, J. Huang, Y. Liu, T. Jing, and Z.F. Lu: Ironmak. Steelmak., 2021, vol. 48, pp. 944–52. https://doi.org/10.1080/03019233.2020.1848302.10.1080/03019233.2020.1848302 ↗
64. P. Thévoz, J.L. Desbiolles, and M. Rappaz: Metall Mater. Trans., 1989, vol. 20A, pp. 311–22. https://doi.org/10.1007/BF02670257.10.1007/BF02670257 ↗
65. D. Turnbull and J.C. Fisher: J. Chem. Phys., 1949, vol. 17, pp. 71–73. https://doi.org/10.1063/1.1747055.10.1063/1.1747055 ↗
66. X.M. Lin, B. Yao, and W.H. Su: Chin. J. High Press. Phys., 1997, pp. 21–26.
67. P.X. Qi: Acta Metall. Sin., 1984, pp. 465–70.
68. O.L. Brown and L.I. Oliver: J. Chem. Educ., 1951, vol. 28, p. 428. https://doi.org/10.1021/ed028p428.10.1021/ed028p428 ↗
69. Z.Q. Han, X.R. Huang, A.A. Luo, A.K. Sachdev, and B.C. Liu: Scripta Mater., 2012, vol. 66, pp. 215–18. https://doi.org/10.1016/j.scriptamat.2011.10.041.10.1016/j.scriptamat.2011.10.041 ↗
70. Z.Q. Han, H. Pan, Y. Li, A.A. Luo, and S.A. Sachdev: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 328–36. https://doi.org/10.1007/s11663-014-0208-7.10.1007/s11663-014-0208-7 ↗
71. H. Shuping, Z. Weimin, and R. Fuzhan: J. Mater. Process. Technol., 2002, vol. 123, pp. 361–70. https://doi.org/10.1016/S0924-0136(02)00074-2.10.1016/S0924-0136(02)00074-2 ↗
72. V. Ramanuj, R. Sankaran, and B. Radhakrishnan: Comput. Mater. Sci., 2019, vol. 169, p. 109097. https://doi.org/10.1016/j.commatsci.2019.109097.10.1016/j.commatsci.2019.109097 ↗
73. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–30. https://doi.org/10.1016/0001-6160(86)90056-8.10.1016/0001-6160(86)90056-8 ↗
74. R. Trivedi, P. Magnin, and W. Kurz: Acta Metall., 1987, vol. 35, pp. 971–80. https://doi.org/10.1016/0001-6160(87)90176-3.10.1016/0001-6160(87)90176-3 ↗
75. L. Nastac and D.M. Stefanescu: Modell. Simul. Mater. Sci. Eng., 1997, vol. 5, p. 391. https://doi.org/10.1088/0965-0393/5/4/008.10.1088/0965-0393/5/4/008 ↗
76. J.A. Spittle and S.G.R. Brown: Acta Metall., 1989, vol. 37, pp. 1803–10. https://doi.org/10.1016/0001-6160(89)90065-5.10.1016/0001-6160(89)90065-5 ↗
77. C. Gandin and M. Rappaz: Acta Metall., 1994, vol. 7, pp. 2233–46. https://doi.org/10.1016/0956-7151(94)90302-6.10.1016/0956-7151(94)90302-6 ↗
78. M.B. Cortte: Metall Trans., 1993, vol. 24, pp. 1045–50. https://doi.org/10.1007/BF02660996.10.1007/BF02660996 ↗
79. L. Nastac: Acta Metall., 1999, vol. 47, pp. 4253–62. https://doi.org/10.1016/S1359-6454(99)00325-0.10.1016/S1359-6454(99)00325-0 ↗
80. S.L. Beltran and D.M. Stefanescu: Int. J. Cast. Metal. Res., 2002, vol. 15, pp. 251–56. https://doi.org/10.1007/s11661-003-0338-z.10.1007/s11661-003-0338-z ↗
81. M.F. Zhu and C.P. Hong: ISIJ Int., 2002, vol. 42, pp. 520–26. https://doi.org/10.2355/isijinternational.42.520.10.2355/isijinternational.42.520 ↗
82. X.R. Huang, Z.Q. Han, and B.C. Liu: Sci. China E, 2011, vol. 54, pp. 479–83. https://doi.org/10.1007/s11431-010-4219-6.10.1007/s11431-010-4219-6 ↗
83. D.R. Gaskeli: Introduction to Metallurgical Thermodynamics, 2nd ed. Hemisphere Publishing Corporation, New York, 1981, pp. 595–96. https://doi.org/10.4324/9780203428498.10.4324/9780203428498 ↗
84. Y.D. Li, Z.Q. Han, A.A. Luo, A.K. Sachdev, and B.C. Liu: Supplemental Proceedings: Materials Properties, Characterization, and Modeling, TMS, 2012, pp. 339–46. https://doi.org/10.1002/9781118357002.ch4410.1002/9781118357002.ch44 ↗
85. Y.F. Yu, Y. Li, F. Lin, and W.T. Yan: Addit. Manuf., 2021, vol. 47, p. 102284. https://doi.org/10.1016/j.addma.2021.102284.10.1016/j.addma.2021.102284 ↗
86. D.C. Tsai and W.S. Hwang: Trans. Nonferr. Metal. Soc., 2010, vol. 20, pp. 1072–77. https://doi.org/10.1016/S1003-6326(09)60260-0.10.1016/S1003-6326(09)60260-0 ↗
87. W. Wang, C. Ji, S. Luo, and M.Y. Zhu: Metall. Mater. Trans. B, 2018, vol. 49B, pp. 200–12. https://doi.org/10.1007/s11663-017-1131-5.10.1007/s11663-017-1131-5 ↗
88. Y. Zhi, Y. Jiang, D. Ke, X.L. Hu, and X.H. Liu: Materials, 2024, vol. 17, p. 1370. https://doi.org/10.3390/ma17061370.10.3390/ma17061370 ↗
89. S.G. Kim: Acta Mater., 2007, vol. 55, pp. 4391–99. https://doi.org/10.1016/j.actamat.2007.04.004.10.1016/j.actamat.2007.04.004 ↗
90. B. Echebarria, R. Folch, A. Karma, and M. Plapp: Phys. Rev. E, 2004, vol. 70, p. 61604. https://doi.org/10.1103/PhysRevE.70.061604.10.1103/PhysRevE.70.061604 ↗
91. H.W. Pan, Z.Q. Han, and B.C. Liu: J. Mater. Sci. Technol., 2016, vol. 32, pp. 68–75. https://doi.org/10.1016/j.jmst.2015.09.005.10.1016/j.jmst.2015.09.005 ↗
92. S.G. Kim, W.T. Kim, and T. Suzuki: Phys. Rev. E, 1999, vol. 60, pp. 7186–97. https://doi.org/10.1103/PhysRevE.60.7186.10.1103/PhysRevE.60.7186 ↗
93. S. Shang, Z.Q. Han, W. Sun, and A.A. Luo: Comp. Mater. Sci., 2017, vol. 136, pp. 264–70. https://doi.org/10.1016/j.commatsci.2017.05.015.10.1016/j.commatsci.2017.05.015 ↗
94. S. Shang, Z.Q. Han, W. Sun, and A.A. Luo: Mater. Sci. Tech-Lond., 2018, vol. 34, pp. 1362–69. https://doi.org/10.1080/02670836.2018.1455011.10.1080/02670836.2018.1455011 ↗
95. G. Reinhart, A. Buffet, H. Nguyen-Thi, B. Billia, H. Jung, N. Mangelinck-Noël, N. Bergeon, T. Schenk, J. Härtwig, and J. Baruchel: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 865–74. https://doi.org/10.1007/s11661-007-9449-2.10.1007/s11661-007-9449-2 ↗
96. N. Limodin, L. Salvo, E. Boller, M. Suéry, M. Felberbaum, S. Gailliègue, and K. Madi: Acta Mater., 2009, vol. 57, pp. 2300–10. https://doi.org/10.1016/j.actamat.2009.01.035.10.1016/j.actamat.2009.01.035 ↗
97. G. Reinhart, C.A. Gandin, N. Mangelinck-Noël, H. Nguyen-Thi, J.-E. Spinelli, J. Baruchel, and B. Billia: Acta Mater., 2013, vol. 61, pp. 4765–77. https://doi.org/10.1016/j.actamat.2013.04.067.10.1016/j.actamat.2013.04.067 ↗
98. J.C. LaCombe, M.B. Koss, L.A. Tennenhouse, E.A. Winsa, and M.E. Glicksman: J. Cryst. Growth, 1998, vol. 194, pp. 143–48. https://doi.org/10.1016/S0022-0248(98)00611-3.10.1016/S0022-0248(98)00611-3 ↗
99. M.B. Koss, J.C. LaCombe, L.A. Tennenhouse, M.E. Glicksman, and E.A. Winsa: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3177–90. https://doi.org/10.1007/s11661-999-0228-0.10.1007/s11661-999-0228-0 ↗
100. P. Kar, J.C. Lacombe, and M.B. Koss: Mater. Sci. Tech-Lond., 2004, vol. 20, pp. 1273–80. https://doi.org/10.1179/026708304225022223.10.1179/026708304225022223 ↗