journal article·2023-12

Mechanical and Tribological Behavior of Titanium and Cerium Oxide-Reinforced Plasma-Sprayed AlNiCoCrSi HEA Coatings

Atirek Gaur, Rahul Kumar, Pushpender Singh, Upender Pandel, Anup Kumar Keshri, Swati Sharma

Publisher page

Abstract

AlNiCoCrSi high-entropy alloy (HEA) was synthesized by ball milling, and the formation of a single-phase BCC (body-centered cubic) solid solution was confirmed using X-ray diffraction (XRD). Three different coatings of bare HEA (H-0), HEA + 1 wt pct TiO2 + 1 wt pct CeO2 (H-1), and HEA + 2 wt pct CeO2 (H-2) were successfully fabricated using atmospheric plasma spray coating to produce thick and dense coatings. It was found that second-phase reinforcement with HEA led to a growth in the relative density of the coatings from 82 pct for H-0 to 92 pct for H-2 coatings. Consequently, improved mechanical and tribological properties for the H-1 and H-2 coatings were obtained. The hardness of the coatings showed a significant increase from 142 GPa for H-0 to 305 GPa for H-1 and 524 GPa for H-2 coatings and the elastic modulus increased from 44 to 55 and 63 GPa for H-0, H-1, and H-2, respectively. Furthermore, an improvement in wear resistance was observed with the incorporation of 2 wt pct CeO2 and 1 wt pct TiO2 + 1 wt pct CeO2 into the coatings. A reduction in the wear rate of the coatings was observed from 172 × 10−7 mm3/(N-m) for H-0 to 158 × 10−7 mm3/(N-m) for H-1 and 137 × 10−7 mm3/(N-m) for H-2 coatings. The microstructure, surface roughness, mechanical, and tribological properties were investigated to correlate them with the improved properties.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. L. Jiang, W. Wu, Z. Cao, D. Deng, and T. Li: J. Therm. Spray. Technol., 2016, vol. 25(4), pp. 1–9.10.1007/s11666-016-0397-5 ↗
2. J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, and S.Y. Chang: Adv. Eng. Mater., 2004, vol. 6, pp. 299–303.10.1002/adem.200300567 ↗
3. A. Meghwal, A. Anupam, B.S. Murty, C.C. Berndt, and A.S.M. Ang: Angew. Therm. Spray Technol., 2020, vol. 29, pp. 857–93.10.1007/s11666-020-01047-0 ↗
4. B.S. Murty, J.W. Yeh, and S. Ranganathan: Chapter 2—high entropy alloys: basic concepts, in High Entropy Alloys. B.S.M.W.Y. Ranganathan, ed., Butterworth-Heinemann, Boston, 2014, pp. 13–35.
5. C.J. Tong, Y.L. Chen, S.K. Chen, J.W. Yeh, T.T. Shun, C.H. Tsau, S.J. Lin, and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 881–93.10.1007/s11661-005-0283-0 ↗
6. F. Gorr, M. Müller, H.-J. Azim, T. Christ, X. Müller, A. Chen, and M. Heilmaier: Metals, 2017, vol. 88, pp. 339–49.
7. H.S. Grewal, R.B. Nair, and H.S. Arora: Surf. Coat. Technol., 2020, vol. 2, pp. 25–51.
8. R.B. Nair, H. Arora, S. Mukherjee, S. Singh, H. Singh, and H. Grewal: Ultrason. Sonochem., 2018, vol. 41, pp. 252–60.10.1016/j.ultsonch.2017.09.044 ↗
9. Y. Shi, B. Yang, and P.K. Liaw: Metals, 2017, vol. 7, p. 43.10.3390/met7020043 ↗
10. A. Anupam, R.S. Kottada, S. Kashyap, A. Meghwal, B. Murty, C. Berndt, and A. Ang: Appl. Surf. Sci., 2020, vol. 5, pp. 14–17.
11. J.-K.H. Tan, Y.-Q. Wu, J. Chen, and C. Zhang: Surf. Coat. Technol., 2020, vol. 5, pp. 125–30.
12. R.B. Nair, G. Perumal, and A. McDonald: Adv. Eng. Mater., 2022, vol. 24, p. 2101713.10.1002/adem.202101713 ↗
13. D. Miracle, J. Miller, O. Senkov, C. Woodward, M. Uchic, and J. Tiley: Entropy, 2014, vol. 16(1), pp. 494–525.10.3390/e16010494 ↗
14. H. Chen: Mater. Charact., 2018, vol. 136, pp. 444–51.10.1016/j.matchar.2017.09.020 ↗
15. S. Praveen, B.S. Murty, and R.S. Kottada: JOM, 2013, vol. 65(12), pp. 1797–1804.10.1007/s11837-013-0759-0 ↗
16. S. Praveen, B.S. Murty, and R.S. Kottada: Mater. Sci. Eng. A, 2012, vol. 534, pp. 83–89.10.1016/j.msea.2011.11.044 ↗
17. Y. Huang, Zhang, J. Shen, and R. Vilar: Surf. Coat. Technol., 2011, vol. 206(6), pp. 1389–95.10.1016/j.surfcoat.2011.08.063 ↗
18. J.A. Haynes, M.K. Ferber, and W.D. Porter: J. Therm. Spray Technol., 2000, vol. 9(1), pp. 38–48.10.1361/105996300770350041 ↗
19. A. Rabiei and A.G. Evans: Acta Mater., 2000, vol. 48(15), pp. 3963–76.10.1016/S1359-6454(00)00171-3 ↗
20. R.S. Kucuk, C.C. Lima, and J. Berndt: Am. Ceram. Soc., 2001, vol. 84(4), pp. 693–700.10.1111/j.1151-2916.2001.tb00728.x ↗
21. T.M. Yue, H. Xie, X. Lin, H. Yang, and G. Meng: Entropy, 2013, vol. 15, pp. 2833–45.10.3390/e15072833 ↗
22. Y.K. Mu, Y.D. Jia, L. Xu, Y.F. Jia, X.H. Tan, J. Yi, and G. Mater: Res. Lett., 2019, vol. 7, pp. 312–19.
23. S. Guo, C. Ng, J. Lu, and C.T. Liu: J. Appl. Phys., 2011, vol. 109, pp. 103–05.
24. S. Sheikh, S. Shafeie, Q. Hu, J. Ahlström, C. Persson, J. Vesel, J. Zyka, U. Klement, and S. Guo: J. Appl. Phys, 2016, vol. 120, pp. 164–72.10.1063/1.4966659 ↗
25. M.H. Tsai, K.Y. Tsai, C.W. Tsai, C. Lee, C.C. Juan, and J.W. Yeh: Mater. Res. Lett., 2013, vol. 1, pp. 207–12.10.1080/21663831.2013.831382 ↗
26. M.H. Tsai, K.C. Chang, J.H. Li, R.C. Tsai, and A.H. Cheng: Mater. Res. Lett., 2016, vol. 4, pp. 90–95.10.1080/21663831.2015.1121168 ↗
27. F.Y. Tian, L.K. Varga, N.X. Chen, J. Shen, and L. Vitos: Intermetallics, 2015, vol. 58, pp. 1–6.10.1016/j.intermet.2014.10.010 ↗
28. X. Yang and Y. Zhang: Mater. Chem. Phys., 2012, vol. 132, pp. 233–38.10.1016/j.matchemphys.2011.11.021 ↗
29. Y.W. Wang, X.L. Wang, X.Y. Wang, Y. Yang, C. Zhang, W.W. Sun, Y.D. Ma, Y.H. Cui, L. Wang, and Y.C. Dong: J. Mater. Eng. Perform., 2020, vol. 29, pp. 6390–6401.10.1007/s11665-020-05147-4 ↗
30. Q.W. Xing and Y. Zhang: Chin. Phys. B, 2017, vol. 26, pp. 100–04.
31. Z.J. Wang, W.F. Qiu, Y. Yang, and C.T. Liu: Intermetallics, 2015, vol. 64, pp. 63–69.10.1016/j.intermet.2015.04.014 ↗
32. Z.J. Wang, Y.H. Huang, Y. Yang, J.C. Wang, and C.T. Liu: Scripta Mater., 2015, vol. 94, pp. 28–31.10.1016/j.scriptamat.2014.09.010 ↗
33. Y.F. Ye, C.T. Liu, and Y. Yang: Acta Mater., 2015, vol. 94, pp. 152–61.10.1016/j.actamat.2015.04.051 ↗
34. A.K. Singh, N. Kumar, A. Dwivedi, and A. Subramaniam: Intermetallics, 2014, vol. 53, pp. 112–19.10.1016/j.intermet.2014.04.019 ↗
35. Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, and Y. Yang: Scripta Mater., 2015, vol. 104, pp. 53–55.10.1016/j.scriptamat.2015.03.023 ↗
36. A.B. Melnick and K. Soolshenko: J. Alloys Compd., 2017, vol. 94, pp. 223–27.10.1016/j.jallcom.2016.09.189 ↗
37. O.N. Senkov and D.B. Miracle: J. Alloys Compd., 2016, vol. 658, pp. 603–07.10.1016/j.jallcom.2015.10.279 ↗
38. Y.F. Ye, Q. Wang, J. Lu, C.T. Liu, and Y. Yang: Mater. Today, 2015, vol. 19, pp. 349–62.10.1016/j.mattod.2015.11.026 ↗
39. Q.F. He, Y.F. Ye, and Y. Yang: J. Appl. Phys., 2016, vol. 120, pp. 154–57.
40. S. Tripathy, G. Gupta, and S.G. Chowdhury: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 7–17.10.1007/s11661-017-4388-z ↗
41. Y.M. Tan, J.S. Li, Z.W. Tang, J. Wang, and H.C. Kou: J. Alloys Compd., 2018, vol. 742, pp. 430–41.10.1016/j.jallcom.2018.01.252 ↗
42. S.L. Zhang, J. Zhang, W.S. Chen, J. Zhu, and U.R. Kattner: Calphad, 2014, vol. 5, pp. 1–10.10.1016/j.calphad.2013.10.006 ↗
43. O.N. Senkov, J.D. Miller, D.B. Miracle, and C. Woodward: Nat. Commun., 2015, vol. 6, pp. 65–75.10.1038/ncomms7529 ↗
44. B. Laurent-Brocq, M. Perriére, L.R. Pirés, J.M. Joubert, and I. Guillot: Acta Mater., 2017, vol. 128, pp. 327–36.10.1016/j.actamat.2017.02.017 ↗
45. F. Tian, L.K. Delczeg, N. Chen, L. Varga, and L. Vitos: Phys. Rev. B, 2013, vol. 88, pp. 85–100.
46. Y. Zhang, Z.D. Zou, and C.W. Shi: J. Rare Earths, 2014, vol. 32, pp. 1096–1100.
47. S.T. Sun, H.G. Fu, X.L. Ping, X.Y. Guo, J. Lin, Y.P. Lei, and W.B. Wu: Surf. Coat. Technol., 2019, vol. 9, pp. 300–13.10.1016/j.surfcoat.2018.12.083 ↗
48. Y.N. Liu, R.L. Sun, W. Niu, T.G. Zhang, and Y.W. Lei: Opt. Laser Eng., 2019, vol. 12, pp. 84–94.
49. T.K. Mishra, A. Kumar, S.K. Sinha, and B. Gupta: Mater. Today, 2018, vol. 5, pp. 286–94.
50. H. Ye, X.B. Zhang, Z.F. Xue, Y.H. Fan, and K. Chen: Adv. Mater. Res., 2009, vol. 79, pp. 795–98.10.4028/www.scientific.net/AMR.79-82.795 ↗
51. H.J. Wang, T. Chen, W.L. Cong, and D.F. Liu: Coatings, 2019, vol. 9, p. 109.10.3390/coatings9020109 ↗
52. S.H. Yao, Y.L. Su, H.Y. Shu, and C.I. Lee: Eng. Mater., 2017, vol. 9, pp. 103–07.10.1016/j.msea.2016.12.014 ↗
53. L.M. Berger, F.-L. Toma, S. Scheitz, and R. Trache: Mater. Werkst., 2014, vol. 5, pp. 465–75.10.1002/mawe.201400260 ↗
54. Y.K. Kim, J. Choe, and K.A. Lee: J. Alloy Compds., 2019, vol. 15, pp. 85–98.
55. X. Wang, Z. Zhang, Z. Wang, and X. Ren: Materials, 2022, vol. 15(3), pp. 12–15.
56. W.C. Si, Z.G. Qu, and J.G. Yu: AIP Adv., 2020, vol. 11, pp. 110–15.
57. X. Ren, W. Sun, Z. Sheng, M. Liu, H. Hui, and Y. Xiao: Nanomaterials, 2023, vol. 12, p. 1104.10.3390/nano13061104 ↗
58. B.S. Murty, J.W. Yeh, S. Ranganathan, and P.P. Bhattacharjee: High-Entropy Alloys, Elsevier, Amsterdam, 2019.10.1016/B978-0-12-816067-1.00010-2 ↗
59. R. Sonkusare, P.D. Janani, N.P. Gurao, S. Sarkar, S. Sen, K.G. Pradeep, and K. Biswas: Mater. Chem. Phys., 2018, vol. 210, pp. 269–78.10.1016/j.matchemphys.2017.08.051 ↗
60. S.S. Maurya, K.K. Pandey, S. Sharma, S. Kumari, K.K. Mirche, D. Kumar, S.M. Pandey, and A.K. Keshri: Diam. Relat. Mater., 2023, vol. 133, 109714.10.1016/j.diamond.2023.109714 ↗
61. K.C. Cheng, J.H. Chen, S. Stadler, and S.H. Chen: Appl. Surf. Sci., 2019, vol. 478, pp. 478–86.10.1016/j.apsusc.2019.01.203 ↗
62. X. Ma, P. Ruggiero, R. Bhattacharya, O.N. Senkov, and A.K. Rai: J. Therm. Spray Technol., 2022, vol. 31, pp. 1–10.10.1007/s11666-022-01339-7 ↗
63. T.C. Chou, T.G. Nieh, S.D. McAdams, and G.M. Pharr: Scr. Metall., 1991, vol. 25, pp. 2203–08.10.1016/0956-716X(91)90001-H ↗
64. A.S.M. Ang, C.C. Berndt, M.L. Sesso, A. Anupam, R.S. Kottada, and B.S. Murty: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 791–800.10.1007/s11661-014-2644-z ↗
65. C. Li, J.C. Li, M. Zhao, and Q. Jiang: J. Alloys Compd., 2010, vol. 504, pp. 515–18.10.1016/j.jallcom.2010.03.111 ↗
66. M. Vaidya, G.M. Muralikrishna, and B.S. Murty: J. Mater. Res., 2019, vol. 34(5), pp. 664–86.10.1557/jmr.2019.37 ↗
67. A. Anupam, R.S. Kottada, S. Kashyap, A. Meghwal, B.S. Murty, C.C. Berndt, and A.S.M. Ang: Appl. Surf. Sci., 2020, vol. 505, 144117.10.1016/j.apsusc.2019.144117 ↗
68. F. Ghadami, S. Ghadami, and M.A. Davoudabadi: J. Therm. Spray Technol., 2022, vol. 31(4), pp. 1263–75.10.1007/s11666-022-01354-8 ↗
69. H.Y. Wang, D.W. Zuo, Y.L. Sun, and Y.W. Zhu: Chin. J. Nonferr. Met., 2008, vol. 18(6), p. 1089.
70. F. Shu, Y. Tian, S. Jiang, S. Sui, X. Zhang, and H. Zhao: Mater. Res. Express, 2019, vol. 6(10), p. 106517.10.1088/2053-1591/ab3589 ↗
71. X. Ren, W. Sun, Z. Sheng, M. Liu, H. Hui, and Y. Xiao: Nanomaterials, 2023, vol. 13(6), p. 1104.10.3390/nano13061104 ↗
72. W. Hongyu, Z. Dunwen, L. Xiangfeng, C. Kangmin, and M. Huang: J. Rare Earths, 2010, vol. 28(2), pp. 246–50.10.1016/S1002-0721(09)60089-2 ↗
73. H.Y. Wang, D.W. Zuo, D.S. Li, X.Y. Luo, M.D. Wang, and Y.W. Zhu: Chinese Patent, ZL200710024996.2009.X.
74. C. Cui, M. Wu, X. Miao, Z. Zhao, and Y. Gong: J. Alloy Compds., 2022, vol. 890, 161826.10.1016/j.jallcom.2021.161826 ↗
75. R. Savinov, Y. Wang, and J. Shi: J. Manuf. Process., 2020, vol. 56, pp. 1245–51.10.1016/j.jmapro.2020.04.018 ↗
76. F. Ghadami, A. Zakeri, A.S.R. Aghdam, and R. Tahmasebi: Surf. Coat. Technol., 2019, vol. 373, pp. 7–16.10.1016/j.surfcoat.2019.05.062 ↗