Internal–State–Variable Based Unified Viscoplastic Constitutive Modeling of TC11 Titanium Alloy and Its Microstructure Evolution Simulation
Source abstract
Abstract
This work aims to develop an internal–state–variable based unified viscoplastic constitutive model for TC11 titanium alloy, and embed it in finite element (FE) software to simulate its microstructure evolution during the high-temperature deformation process. Firstly, the flow and softening mechanisms of TC11 alloy with strip primary alpha phase ((alphap)) were investigated via isothermal compression tests at deformation temperatures ((T)) of 850 °C to 950 °C, strain rates ((dot{varepsilon })) of 0.1 to 10.0 s−1, and true strains ((varepsilon)) of 0.223 to 0.916. Further, the effects of deformation parameters on the phase transformation and globularization of TC11 alloy were studied via the observation and quantitative analysis of microstructure. The strip (alphap) globularization fraction increases with increasing (T) and (varepsilon) but decreases with increasing (dot{varepsilon }). Additionally, the phase transformation from (alphap) to beta phase promotes the globularization of the strip (alphap) but reduces the dislocation density. Accordingly, a set of unified viscoplastic constitutive equations coupling multiple internal variables of TC11 alloy was established and modified. The results demonstrate that the calculated flow stress and globularization fraction are consistent with the experimental data. Finally, this constitutive model was embedded into the FE software Simufact to simulate the microstructure evolution of TC11 alloy during the uniaxial compression process. The simulated geometric dimensions and microstructure distribution characteristics are in good agreement with the experimental results. The beta phase volume fraction and the strip (alphap) globularization fraction increase with increasing the (varepsilon), and their maximum values are concentrated in the central area of the compressed specimen.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. C. Liu, F. Yin, L.C. Xie, D.S. Qian, Y.L. Song, W.L. Wu, L.Q. Wang, L.C. Zhang, and L. Hua: J. Alloys Compd., 2022, vol. 904, p. 163969.10.1016/j.jallcom.2022.163969 ↗
2. W. Yu, M.Q. Li, and J. Luo: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4210–17.10.1016/j.msea.2010.03.024 ↗
3. J.L. Li, B.Y. Wang, Y. Qin, S. Fang, X. Huang, and P. Chen: Int. J. Adv. Manuf. Technol., 2019, vol. 103, pp. 2563–77.10.1007/s00170-019-03461-3 ↗
4. Y.Q. Zhao, Y.N. Chen, X.M. Zhang, W.D. Zeng, and L. Wang: Phase Transformation and Heat Treatment of Titanium Alloys, 1st ed. Central South University Press, Changsha, 2012, pp. 15–99.
5. E. Ghasemi, A. Zarei-Hanzaki, E. Farabi, K. Tesař, A. Jäger, and M. Rezaee: J. Alloys Compd., 2017, vol. 695, pp. 1706–18.10.1016/j.jallcom.2016.10.322 ↗
6. W. Ziaja, A. Kawalec, K. Kubiak, S. Jan: Proceedings of the 13th World Conference on Titanium, 2016, pp. 697–700. https://doi.org/10.1002/9781119296126.ch116.10.1002/9781119296126.ch116 ↗
7. H.J. Zhao, B.Y. Wang, G. Liu, L. Yang, and W.C. Xiao: Trans. Nonferr. Met. Soc. China, 2015, vol. 25, pp. 1881–88.10.1016/S1003-6326(15)63795-5 ↗
8. J.L. Li, B.Y. Wang, S. Fang, and P. Chen: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 70.10.1007/s43452-020-00078-2 ↗
9. P.N. Feng, C.P. Yang, B.Y. Wang, J.L. Li, and R.E. Liu: Arch. Civ. Mech. Eng., 2021, vol. 21, p. 129.10.1007/s43452-021-00276-6 ↗
10. R.L. Fan, Y. Wu, M.H. Chen, and L.S. Xie: Trans. Nonferr. Met. Soc. China, 2020, vol. 30, pp. 928–43.10.1016/S1003-6326(20)65266-9 ↗
11. Y.Y. Zong, D.B. Shan, M. Xu, and Y. Lu: J. Mater. Process. Technol., 2009, vol. 209, pp. 1988–94.10.1016/j.jmatprotec.2008.04.063 ↗
12. X.G. Fan, H. Yang, and P.F. Gao: J. Mater. Sci., 2011, vol. 46, pp. 6018–28.10.1007/s10853-011-5564-y ↗
13. A.M. Zhao, H. Yang, X.G. Fan, P.F. Gao, R. Zuo, and M. Meng: Mater. Des., 2016, vol. 109, pp. 112–22.10.1016/j.matdes.2016.07.001 ↗
14. L. Jing, R.D. Fu, Y.P. Wang, L. Qiu, and B. Yan: Mater. Sci. Eng. A, 2017, vol. 704, pp. 434–39.10.1016/j.msea.2017.08.048 ↗
15. J.L. Li, B.Y. Wang, H. Huang, S. Fang, P. Chen, and J.X. Shen: J. Alloys Compd., 2018, vol. 748, pp. 1031–43.10.1016/j.jallcom.2018.03.120 ↗
16. Z.X. Su, C.Y. Sun, M.J. Wang, L.Y. Qian, and X.T. Li: J. Magn. Alloys, 2022, vol. 10, pp. 281–94.10.1016/j.jma.2021.07.022 ↗
17. Z.C. Sun, H.L. Wu, J. Cao, and Z.K. Yin: Int. J. Plast., 2018, vol. 106, pp. 73–87.10.1016/j.ijplas.2018.03.002 ↗
18. J. Lin and Y. Liu: J. Mater. Process. Technol., 2003, vol. 143, pp. 281–85.10.1016/S0924-0136(03)00472-2 ↗
19. J. Lin and T.A. Dean: J. Mater. Process. Technol., 2005, vol. 167, pp. 354–62.10.1016/j.jmatprotec.2005.06.026 ↗
20. H. Li, J. Lin, T.A. Dean, S.W. Wen, and A.C. Bannister: Int. J. Plast., 2009, vol. 25, pp. 1049–65.10.1016/j.ijplas.2008.09.001 ↗
21. Y.M. Huo, Q. Bai, B.Y. Wang, J.G. Lin, and J. Zhou: J. Mater. Process. Technol., 2015, vol. 223, pp. 274–83.10.1016/j.jmatprotec.2015.04.011 ↗
22. X.Q. Cao, B.Y. Wang, J. Zhou, and J.X. Shen: J. Manuf. Process., 2022, vol. 76, pp. 598–610.10.1016/j.jmapro.2022.02.021 ↗
23. H. Ahmed, M.A. Wells, D.M. Maijer, B.J. Howes, and M.R.V.D. Winden: Mater. Sci. Eng. A, 2005, vol. 390, pp. 278–90.10.1016/j.msea.2004.08.045 ↗
24. M.S. Mohamed, A.D. Foster, J. Lin, D.S. Balint, and T.A. Dean: Int. J. Mach. Tool. Manuf., 2012, vol. 53, pp. 27–38.10.1016/j.ijmachtools.2011.07.005 ↗
25. J. Lin, M. Mohamed, D. Balint, and T.A. Dean: Int. J. Damage Mech., 2014, vol. 23, pp. 684–701.10.1177/1056789513507731 ↗
26. E. Popova, Y. Staraselski, A. Brahme, R.K. Mishra, and K. Inal: Int. J. Plast., 2015, vol. 66, pp. 85–102.10.1016/j.ijplas.2014.04.008 ↗
27. Z.X. Su, C.Y. Sun, M.W. Fu, and L.Y. Qian: Adv. Manuf., 2019, vol. 7, pp. 30–41.10.1007/s40436-018-0243-8 ↗
28. X.G. Fan and H. Yang: Int. J. Plast., 2011, vol. 27, pp. 1833–52.10.1016/j.ijplas.2011.05.008 ↗
29. Q. Bai, J. Lin, T.A. Dean, D.S. Balint, T. Gao, and Z. Zhang: Mater. Sci. Eng. A, 2013, vol. 559, pp. 352–58.10.1016/j.msea.2012.08.110 ↗
30. H.J. Zhao, B.Y. Wang, G. Liu, and L. Yang: Chin. J. Eng., 2014, vol. 36, pp. 925–30.
31. T. Yasmeen, Z.T. Shao, L. Zhao, P. Gao, J.G. Lin, and J. Jiang: Int. J. Mech. Sci., 2019, vol. 164, p. 105178.10.1016/j.ijmecsci.2019.105178 ↗
32. X.M. Yang, B.Y. Wang, J. Zhou, W.C. Xiao, and P.N. Feng: Arch. Civ. Mech. Eng., 2021, vol. 21, p. 69.10.1007/s43452-021-00217-3 ↗
33. L.F. Lin, B.Y. Wang, J. Zhou, and J.X. Shen: Int. J. Adv. Manuf. Technol., 2022, vol. 118, pp. 2833–51.10.1007/s00170-021-08079-y ↗
34. S. Zherebtsov, M. Murzinova, G. Salishchev, and S.L. Semiatin: Acta Mater., 2011, vol. 59, pp. 4138–50.10.1016/j.actamat.2011.03.037 ↗
35. I. Weiss, F.H. Froes, D. Eylon, and G.E. Welsch: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1935–47.10.1007/BF02644991 ↗
36. I. Philippart and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 196–200.10.1016/S0921-5093(97)00800-9 ↗
37. H.J. Zhao, B.Y. Wang, D.Y. Ju, and J.G. Chen: Trans. Nonferr. Met. Soc. China, 2018, vol. 28, pp. 2449–59.10.1016/S1003-6326(18)64891-5 ↗
38. A.S. Khan, Y.S. Suh, and R. Kazmi: Int. J. Plast., 2004, vol. 20, pp. 2233–48.10.1016/j.ijplas.2003.06.005 ↗
39. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
40. L. Yang, B.Y. Wang, G. Liu, H.J. Zhao, and W.C. Xiao: Mater. Des., 2015, vol. 85, pp. 135–48.10.1016/j.matdes.2015.06.096 ↗
41. J. Lin and F.P.E. Dunne: Int. J. Mech. Sci., 2001, vol. 43, pp. 595–609.10.1016/S0020-7403(00)00055-2 ↗
42. J. Cao and J. Lin: Int. J. Mech. Sci., 2008, vol. 50, pp. 193–204.10.1016/j.ijmecsci.2007.07.003 ↗