Prediction Model of the Proeutectoid Ferrite Growth of a Continuous Casting Slab
Source abstract
Abstract
Grain boundary proeutectoid ferrite precipitation in the straightening zone of a wide-thick slab will affect the thermoplasticity of the slab, thereby affecting surface crack initiation. In this work, a mixed-mode model is established for Q345 (Fe–0.17C–1.50Mn) steel considering the energy dissipation due to Mn diffusion inside the interface. It is proven by experiments that the mixed-mode model can well predict the equilibrium volume fraction of proeutectoid ferrite at different temperatures and the growth kinetics of grain boundary proeutectoid ferrite film during the continuous cooling of large-size austenite grains. Moreover, the growth kinetics of the grain boundary proeutectoid ferrite film in the whole slab section and process were predicted based on the real-time slab temperature field calculated by a 2D heat transfer model. Finally, according to the relationship between the proeutectoid ferrite volume fraction and thermoplasticity, it is determined that when the water amount in the secondary cooling zones 6 to 8 is reduced by more than 20 pct or increased by more than 80 pct, the slab corner will maintain good thermoplastic properties in the straightening zone, and the risk of corner transverse crack formation is low.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Q.L. Jiang, Y.J. Li, J. Wang, and L. Zhang: Mater. Sci. Eng. A, 2011, vol. 27, pp. 1565–69.
2. J. Liu, G. Wen, and P. Tang: Metall. Mater. Trans. B, 2017, vol. 48B, pp. 3074–82.10.1007/s11663-017-1003-z ↗
3. F.J. Ma, G.H. Wen, P. Tang, X. Yu, J.Y. Li, G.D. Xu, and F. Mei: Ironmak. Steelmak., 2010, vol. 37, pp. 211–18.10.1179/030192309X12595763237085 ↗
4. C. Du, J. Zhang, J. Wen, Y. Li, and P. Lan: Ironmak. Steelmak., 2016, vol. 43, pp. 331–39.10.1179/1743281215Y.0000000044 ↗
5. L.F. Zhang, X.G. Yang, S.S. Li, M. Li, and W. Ma: JOM, 2014, vol. 66, pp. 1711–20.10.1007/s11837-014-1112-y ↗
6. H.S. Liu, C.W. Du, P. Lan, H.Y. Tang, C.J. Shang, and J.Q. Zhang: Metall. Res. Technol., 2017, vol. 114, p. 401.10.1051/metal/2017005 ↗
7. M. Hillert, Introduction to Paraequilibrium, Internal report, Swedish Institute of Metals Research, Stockholm, 1953.
8. A. Hultgren: Trans. Am. Soc. Met., 1947, vol. 39, pp. 915–1005.
9. J.S. Kirkaldy: Can. J. Phys, 1958, vol. 36, pp. 899–906.10.1139/p58-096 ↗
10. J.S. Kirkaldy: Can. J. Phys, 1959, vol. 37, pp. 30–34.10.1139/p59-005 ↗
11. D.E. Coates: Metall. Trans., 1972, vol. 3, pp. 1203–12.10.1007/BF02642453 ↗
12. D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 1077–86.10.1007/BF02645611 ↗
13. D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 395–96.10.1007/BF02649655 ↗
14. D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 2313–25.10.1007/BF02669370 ↗
15. J.B. Gilmour, G.R. Purdy, and J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 1455–64.10.1007/BF02643033 ↗
16. C.R. Hutchinson, A. Fuchsmann, and Y. Brechet: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1211–21.10.1007/s11661-004-0295-1 ↗
17. K. Oi, C. Lux, and G.R. Purdy: Acta Mater., 2000, vol. 48, pp. 2147–55.10.1016/S1359-6454(00)00041-0 ↗
18. Z.Q. Liu, G. Miyamoto, Z.G. Yang, and T. Furuhara: Acta Mater., 2013, vol. 61, pp. 3120–29.10.1016/j.actamat.2013.02.003 ↗
19. M. Militzer, M.G. Mecozzi, J. Sietsma, and S. van der Zwaag: Acta Mater., 2006, vol. 54, pp. 3961–72.10.1016/j.actamat.2006.04.029 ↗
20. M.G. Mecozzi, J. Sietsma, and S. van der Zwaag: Acta Mater., 2006, vol. 54, pp. 1431–40.10.1016/j.actamat.2005.11.014 ↗
21. M.G. Mecozzi, J. Sietsma, S. van der Zwaag, M. Apel, P. Schaffnit, and I. Steinbach: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2327–40.10.1007/s11661-005-0105-4 ↗
22. J. Sietsma and S. van der Zwaag: Acta Mater., 2004, vol. 52, pp. 4143–52.10.1016/j.actamat.2004.05.027 ↗
23. E. Gamsjäger, J. Svoboda, and F.D. Fischer: Comput. Mater. Sci., 2005, vol. 32, pp. 360–69.10.1016/j.commatsci.2004.09.031 ↗
24. M. Hillert and L. Höglund: Scripta Mater., 2006, vol. 54, pp. 1259–63.10.1016/j.scriptamat.2005.12.023 ↗
25. E. Gamsjäger, M. Wiessner, S. Schider, H. Chen, and S. Van der Zwaag: Philos. Mag., 2015, vol. 95, pp. 2899–2917.10.1080/14786435.2015.1082662 ↗
26. M. Hillert and B. Sundman: Acta Mater., 1997, vol. 25, pp. 11–18.10.1016/0001-6160(77)90240-1 ↗
27. C. Qiu, H. Zurob, and C.R. Hutchinson: Acta Mater., 2015, vol. 100, pp. 333–43.10.1016/j.actamat.2015.08.065 ↗
28. G.R. Purdy and Y.J.M. Brechét: Acta Mater., 1995, vol. 43, pp. 3763–74.10.1016/0956-7151(95)90160-4 ↗
29. P.R. Cha, S.G. Kim, D.H. Yeon, and J.K. Yppn: Acta Mater., 2002, vol. 50, pp. 3817–29.10.1016/S1359-6454(02)00187-8 ↗
30. B.Q. Zhu, H. Chen, and M. Militzer: Comput. Mater. Sci., 2015, vol. 108, pp. 333–41.10.1016/j.commatsci.2015.01.023 ↗
31. A. Bhattacharya, C.S. Upadhyay, and S. Sangal: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4929–42.10.1007/s11661-017-4225-4 ↗
32. H. Chen, B.Q. Zhu, and M. Militzer: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3873–81.10.1007/s11661-016-3595-3 ↗
33. H. Fang, S. van der Zwaag, and N.H. van Dijk: Acta Mater, 2021, vol. 212, p. 116897.10.1016/j.actamat.2021.116897 ↗
34. H. Fang, M.G. Mecozzi, E. Brück, S. van der Zwaag, and N.H. van Dijk: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 41–53.10.1007/s11661-017-4397-y ↗
35. H. Chen and S. van der Zwaag: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2720–29.10.1007/s11661-016-3826-7 ↗
36. Y. Xia, G. Miyamoto, Z.G. Yang, C. Zhang, and T. Furuhara: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2347–51.10.1007/s11661-015-2866-8 ↗
37. W.W. Sun, H.S. Zurob, and C.R. Hutchinson: Acta Mater., 2017, vol. 139, pp. 62–74.10.1016/j.actamat.2017.08.010 ↗
38. H. Chen and S. van der Zwaag: Acta Mater., 2014, vol. 72, pp. 1–12.10.1016/j.actamat.2014.03.034 ↗
39. M. Hillert: Metall. Trans. A, 1975, vol. 6, pp. 5–19.10.1007/BF02673664 ↗
40. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
41. G.R. Purdy and Y.J.M. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 3763–74.10.1016/0956-7151(95)90160-4 ↗
42. T. Jia and M. Militzer: ISIJ Int., 2012, vol. 52, pp. 644–49.10.2355/isijinternational.52.644 ↗
43. H. Chen, K.Y. Zhu, L. Zhao, and S. van der Zwaag: Acta Mater., 2013, vol. 61, pp. 5458–68.10.1016/j.actamat.2013.05.034 ↗
44. J.N. Zhu, H.W. Luo, Z.G. Yang, C. Zhang, S. van der Zwaag, and H. Chen: Acta Mater., 2017, vol. 133, pp. 258–68.10.1016/j.actamat.2017.05.045 ↗
45. C.H. Wu, C. Ji, and M.Y. Zhu: Metall. Mater. Trans. B, 2018, vol. 49B, pp. 1346–59.10.1007/s11663-018-1173-3 ↗
46. C. Ji, S. Luo, M.Y. Zhu, and Y. Saha: ISIJ Int., 2014, vol. 54, pp. 103–11.10.2355/isijinternational.54.103 ↗
47. B. Petrus, K. Zheng, X. Zhou, B.G. Thomas, and J. Bentsman: Metall. Mater. Trans. B, 2011, vol. 42B, pp. 87–103.10.1007/s11663-010-9452-7 ↗
48. G. Xia and A. Schiefermüller: Steel Res. Int, 2010, vol. 81, pp. 652–59.10.1002/srin.201000089 ↗
49. B. Weisgerber, M. Hecht, K. Harste, H. Morand, M. Kandel, and J.Y. Lamant: Steel Res., 2002, vol. 73, pp. 15–19.10.1002/srin.200200167 ↗