journal article·2023-03

Microstructure and Mechanical Characterization of Stainless Steel and Copper Joint by Metallurgical Modification in GTAW Process

Tanmay, Sudhansu Sekhar Panda

Publisher page

Abstract

The dissimilar metal joining of stainless steel (SS)/copper (Cu) was done cost-effectively with Gas Tungsten Arc Welding (GTAW). A combination of process modification and a metallurgical approach solved the challenges associated with dissimilar metal joining. Off-setting the arc towards the Cu plate ensured proper heat distribution, and metallurgical issues were resolved using Ni-based filler material. Because the middle region of stainless steel along the thickness remains unmelted, the joints were produced in welding brazing mode. Joints made without filler material have a joint efficiency of 85 pct and an elongation of 35 pct of that of pure Cu base metal. In the mushy zone, defects such as porosity and Cu penetration had been observed. Ni-based filler material minimised these defects, and the best joint was produced with NiCu-7 filler material, with joint efficiency (90 pct) and highest elongation (51 pct) that of pure Cu base metal. NiCr-3 filler produced joint with the highest joint strength (96 pct) and elongation (29 pct) that of pure Cu base metal.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Tanmay and S.S. Panda: CIRP J. Manuf. Sci. Technol., 2021, vol. 35, pp. 454–59.10.1016/j.cirpj.2021.07.009 ↗
2. C.C. Chang, L.H. Wu, C. Shueh, C.K. Chan, I.C. Shen, and C.K. Kuan: Int. J. Adv. Manuf. Technol., 2017, vol. 91, pp. 2217–24.10.1007/s00170-016-9956-7 ↗
3. G. Navrotski and B. Brajuskovic: Proc. MEDSI2016, Barcelona, Spain, 2016, pp. 220–22.
4. Y. Poo-arporn, S. Duangnil, D. Bamrungkoh, P. Klangkaew, C. Huasranoi, P. Pruekthaisong, S. Boonsuya, J. Chaiprapa, A. Ruangvittayanon, and C. Saisombat: J. Mater. Process. Technol., 2020, vol. 277, p. 116490.10.1016/j.jmatprotec.2019.116490 ↗
5. C. Lusch, M. Börsch, C. Heidt, N. Magginetti, J. Sas, K.P. Weiss, and S. Grohmann: IOP Conf. Ser. Mater. Sci. Eng. doi: https://doi.org/10.1088/1757-899X/102/1/012017.10.1088/1757-899X/102/1/012017 ↗
6. J. Mendolia and A. Mauneau: Cryogenics, 1980, vol. 20, p. 336.10.1016/0011-2275(80)90184-8 ↗
7. S. Chen, J. Huang, J. Xia, H. Zhang, and X. Zhao: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 3690–96.10.1007/s11661-013-1693-z ↗
8. I. Magnabosco, P. Ferro, F. Bonollo, and L. Arnberg: Mater. Sci. Eng. A, 2006, vol. 424, pp. 163–73.10.1016/j.msea.2006.03.096 ↗
9. R. Saranarayanan, A.K. Lakshminarayanan, and B. Venkatraman: Arch. Civ. Mech. Eng., 2019, vol. 19, pp. 251–67.10.1016/j.acme.2018.08.009 ↗
10. S.G. Shiri, M. Nazarzadeh, M. Sharifitabar, and M.S. Afarani: Trans. Nonferr. Met. Soc. China, 2012, vol. 22, pp. 2937–42.10.1016/S1003-6326(11)61553-7 ↗
11. H.D. Vyas, K.P. Mehta, V. Badheka, and B. Doshi: Mater. Sci. Eng. A, 2022, vol. 832, p. 142444.10.1016/j.msea.2021.142444 ↗
12. X. Guo, P. He, K. Xu, X.C. Lv, J.B. Zhang, and Y. Gu: Weld. World, 2022, vol. 66, pp. 187–94.10.1007/s40194-021-01199-9 ↗
13. M. Velu and S. Bhat: Mater. Des., 2013, vol. 47, pp. 793–809.10.1016/j.matdes.2012.12.073 ↗
14. C. Roy, V.V. Pavanan, G. Vishnu, P.R. Hari, M. Arivarasu, M. Manikandan, D. Ramkumar, N. Arivazhagan, W. Zhang, H. Liao, Z. Hu, S. Zhang, B. Chen, H. Yang, Y. Wang, H. Zhu, A. Kumar, M.K. Chopkar, J. Verma, R.V. Taiwade, V. Tandon, S. Shukla, X. Guo, P. He, K. Xu, X.C. Lv, J.B. Zhang, Y. Gu, T.W. Nelson, J.C. Lippold, M.J. Mills, N. Switzner, H. Queiroz, J. Duerst, Z. Yu, J.Z. Zhao, T. Ahmed, H.X. Jiang, J. He, and Q. Sun: Weld. J., 2017, vol. 709, pp. 1–28.
15. G. Singh, R.K. Saxena, and S. Pandey: Mater. Today Proc., 2019, vol. 26, pp. 2783–89.10.1016/j.matpr.2020.02.579 ↗
16. S. Chen, X. Yu, J. Huang, J. Yang, and S. Lin: J. Alloys Compd., 2019, vol. 773, pp. 719–29.10.1016/j.jallcom.2018.09.282 ↗
17. T. Soysal, S. Kou, D. Tat, and T. Pasang: Acta Mater., 2016, vol. 110, pp. 149–60.10.1016/j.actamat.2016.03.004 ↗
18. Y.Z. Chen, F. Liu, G.C. Yang, X.Q. Xu, and Y.H. Zhou: J. Alloys Compd., 2007, vol. 427, pp. 3–8.10.1016/j.jallcom.2006.03.013 ↗
19. S. Kou: Weld. Metall., vol. 4, 2003.
20. R.P. Shi, C.P. Wang, D. Wheeler, X.J. Liu, and Y. Wang: Acta Mater., 2013, vol. 61, pp. 1229–43.10.1016/j.actamat.2012.10.033 ↗
21. Z. Cheng, J. Huang, Z. Ye, Y. Chen, J. Yang, and S. Chen: J. Mater. Process. Technol., 2019, vol. 265, pp. 87–98.10.1016/j.jmatprotec.2018.10.007 ↗
22. R.F. Brooks, I. Egry, S. Seetharaman, and D. Grant: High Temp.-High Press., 2001, vol. 33, pp. 631–37.10.1068/htwu323 ↗
23. Y. Zhang, J. Huang, H. Chi, N. Cheng, Z. Cheng, and S. Chen: Mater. Lett., 2015, vol. 156, pp. 7–9.10.1016/j.matlet.2015.04.128 ↗
24. Y.K. Yang and S. Kou: 2007, pp. 331–39.
25. P. Zhang, S.X. Li, and Z.F. Zhang: Mater. Sci. Eng. A, 2011, vol. 529, pp. 62–73.10.1016/j.msea.2011.08.061 ↗