Post-Weld Heat Treatment of Additively Manufactured Inconel 718 Welded to Forged Ni-Based Superalloy AD730 by Linear Friction Welding
Source abstract
Abstract
A new post-weld heat treatment (PWHT) cycle was designed for novel dissimilar linear friction welding (LFW) of selective laser melted (SLM) Inconel 718 (IN718) to AD730 forged nickel-based superalloy. The microstructure and hardness of the joints after the PWHT are investigated and compared with those of as-linear friction welded samples. The precipitation of γ′ + γ″ is determined as the main mechanism to increase the mechanical properties of SLM IN718 alloy. These particles coarsened during heat treatment at 1253 K and double aging. The results show that the thermomechanical history of linear friction welded joints can affect the microstructure of IN718 alloy such as the morphology of δ phase after solution treatment (ST) from the platelike in the weld zone (WZ) to the needlelike in the base material (BM). It was found that in AD730, nanometric size γ′ particles reprecipitated close to the weld line during rapid cooling after welding. The presence of ultrafine γ′ particles and coarsening of the remaining particles in the microstructure of the alloy, during PWHT, can enhance the strength and hardness. The developed PWHT resulted in uniform hardness across the new dissimilar joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Welding Techniques and Residual Stresses · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. 1. A. Chamanfar, M. Jahazi, and J. Cormier: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1639–69.10.1007/s11661-015-2752-4 ↗
2. 2. I. Bhamji, M. Preuss, P.L. Threadgill, and A.C. Addison: Mater. Sci. Technol., 2011, vol. 27, pp. 2–12.10.1179/026708310X520510 ↗
3. A.C. Addison: TWI Ltd, Cambridge, United Kingdom, 2010.
4. 4. P. Wanjara and M. Jahazi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2149–64.10.1007/s11661-005-0335-5 ↗
5. 5. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and B.C.D. Flipo: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2886–99.10.1007/s11661-017-4067-0 ↗
6. 6. X. Cao, B. Rivaux, M. Jahazi, J. Cuddy, and A. Birur: J. Mater. Sci., 2009, vol. 44, pp. 4557–71.10.1007/s10853-009-3691-5 ↗
7. R.R. Ye, H.Y. Li, R.G. Ding, T.J.A. Doel, S. Bray, A. Walpole, and P. Bowen: Mater. Sci. Eng.: A, 2020, vol. 774, pp. 138894.10.1016/j.msea.2019.138894 ↗
8. E. Herderick: Mater. Sci. Technol., 2011, vol. 2, pp. 1413–25.
9. 9. Yuan Chen, Ke Zhang, Jian Huang, Seyed Reza Elmi Hosseini, and Zhuguo Li: Mater. Des., 2016, vol. 90, pp. 586–94.10.1016/j.matdes.2015.10.155 ↗
10. 10. K. Moussaoui, W. Rubio, M. Mousseigne, T. Sultan, and F. Rezai: Mater. Sci. Eng.: A, 2018, vol. 735, pp. 182–90.10.1016/j.msea.2018.08.037 ↗
11. 11. V.A. Popovich, E.V. Borisov, A.A. Popovich, V.S. Sufiiarov, D.V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 131, pp. 12–22.10.1016/j.matdes.2017.05.065 ↗
12. 12. Seyedmohammad Tabaie, Farhad Rézaï-Aria, and Mohammad Jahazi: Metals, 2020, vol. 10, p. 587-608.10.3390/met10050587 ↗
13. 13. Mang Ni, Shichao Liu, Chao Chen, Ruidi Li, Xiaoyong Zhang, and Kechao Zhou: Mater. Sci. Eng.: A, 2019, vol. 748, pp. 275–85.10.1016/j.msea.2019.01.109 ↗
14. 14. Wenpu Huang, Jingjing Yang, Huihui Yang, Guanyi Jing, Zemin Wang, and Xiaoyan Zeng: Mater. Sci. Eng.: A, 2019, vol. 750, pp. 98–107.10.1016/j.msea.2019.02.046 ↗
15. 15. Shang Sui, Hua Tan, Jing Chen, Chongliang Zhong, Zuo Li, Wei Fan, Andres Gasser, and Weidong Huang: Acta Mater., 2019, vol. 164, pp. 413–27.10.1016/j.actamat.2018.10.032 ↗
16. E. M. Fayed, M. Saadati, D. Shahriari, V. Brailovski, M. Jahazi, and M. Medraj: Metals, 2021, vol. 11, pp. 144-71.10.3390/met11010144 ↗
17. S. Tabaie, F. Rézaï-Aria, B. C. D. Flipo, and M. Jahazi: Mater. Charact., 2021, Vol. 171, pp. 110766.10.1016/j.matchar.2020.110766 ↗
18. 18. F. Masoumi, D. Shahriari, H. Monajati, J. Cormier, B.C.D. Flipo, A. Devaux, and M. Jahazi: Mater. Des., 2019, vol. 183, pp. 108–17.10.1016/j.matdes.2019.108117 ↗
19. 19. Muralimohan Cheepu, V. Muthupandi, and Woo Seong Che: Appl. Mech. Mater., 2018, vol. 877, pp. 157–62.10.4028/www.scientific.net/AMM.877.157 ↗
20. 20. Antonello Astarita, Fabio Scherillo, Michele Curioni, Paolo Aprea, Filomena Impero, Antonino Squillace, and Xiaorong Zhou: Mater. Manufact. Processes, 2016, vol. 31, pp. 2115–22.10.1080/10426914.2016.1151048 ↗
21. O.N. Senkov, D.W. Mahaffey, S. L. Semiatin, and C. Woodward: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5545–61.10.1007/s11661-014-2512-x ↗
22. 22. Z.W. Huang, H.Y. Li, M. Preuss, M. Karadge, P. Bowen, S. Bray, and G. Baxter: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1608–20.10.1007/s11661-007-9194-6 ↗
23. 23. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Mater. Charact., 2015, vol. 104, pp. 149–61.10.1016/j.matchar.2015.04.011 ↗
24. 24. A. Chamanfar, M. Jahazi, A. Bonakdar, E. Morin, and A. Firoozrai: Mater. Sci. Eng.: A, 2015, vol. 642, pp. 230–40.10.1016/j.msea.2015.06.087 ↗
25. L Sarrat, A Chamanfar, and M. Jahazi: 2012.
26. 26. Yu-Sik Kong, Muralimohan Cheepu, and Dong-Gyu Kim: Trans. Ind. Inst. Met., 2020, vol. 73, pp. 1449–53.10.1007/s12666-020-01911-1 ↗
27. Y. Xu, W. Li, X. Yang, and Y. Gu: Mater. Sci. Eng.: A, 2020, vol. 788, pp. 139596.10.1016/j.msea.2020.139596 ↗
28. 28. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 729–44.10.1007/s11661-010-0457-2 ↗
29. R. Damodaram, S. GaneshSundaraRaman, D.V.V. Satyanarayana, G. MadhusudhanReddy, and K. PrasaRao: Mater. Sci. Eng.: A, 2014, vol. 612, pp. 414–22.10.1016/j.msea.2014.06.076 ↗
30. 30. Guoliang Qin, Peihao Geng, Jun Zhou, and Zengda Zou: Mater. Des., 2019, vol. 172, p. 107766.10.1016/j.matdes.2019.107766 ↗
31. O. Roder, D. Helm, S. Neft, J. Albrecht, and G. Luetjering: Proceedings of the Sixth International Special Emphasis Symposium on Superalloy, 2005, pp. 649–58.10.7449/2005/Superalloys_2005_649_658 ↗
32. 32. F. Masoumi, L. Thébaud, D. Shahriari, M. Jahazi, J. Cormier, A. Devaux, and B.C.D. Flipo: Mater. Sci. Eng.: A, 2018, vol. 710, pp. 214–26.10.1016/j.msea.2017.10.091 ↗
33. 33. F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and A. Devaux: Sci. Rep., 2016, vol. 6, p. 28650.10.1038/srep28650 ↗
34. M. Panella, L. Signor, J. Cormier, M. Bernacki, and P. Villechaise: Superalloys, Springer, Cham, 2020, pp. 570–78.
35. 35. M. Smith, L. Bichler, J. Gholipour, and P. Wanjara: Int. J. Adv. Manufact. Technol., 2017, vol. 90, pp. 1931–46.10.1007/s00170-016-9515-2 ↗
36. 36. M. Smith, L. Bichler, and D. Sediako: Mater. Sci. Forum, 2016, vol. 879, pp. 1800–06.10.4028/www.scientific.net/MSF.879.1800 ↗
37. 37. Mahesh C. Chaturvedi: Mater. Sci. Forum, 2007, vols. 546–549, pp. 1163–70.10.4028/www.scientific.net/MSF.546-549.1163 ↗
38. M.C. Chaturvedi and Y. Han: Met. Sci., 1983, vol. 17, pp. 145–49.10.1179/030634583790421032 ↗
39. 39. Yen-Ling Kuo, Shota Horikawa, and Koji Kakehi: Mater. Des., 2017, vol. 116, pp. 411–18.10.1016/j.matdes.2016.12.026 ↗
40. L.S. Ling, Z. Yin, Z. Hu, J.H. Liang, Z.Y. Wang, J. Wang, and B.D. Sun: Materials (Basel), 2019, vol. 13, pp. 151-165.10.3390/ma13010151 ↗
41. W. Cao: Superalloys, 2008, pp. 789–97.10.7449/2008/Superalloys_2008_789_797 ↗
42. M. Rafiei, H. Mirzadeh, and M. Malekan: Vacuum, 2021, vol. 184, pp. 109913.10.1016/j.vacuum.2020.109913 ↗
43. 43. Shyam Katnagallu, Suzanne Vernier, Marie-Agathe Charpagne, Baptiste Gault, Nathalie Bozzolo, and Paraskevas Kontis: Scripta Mater., 2021, vol. 191, pp. 7–11.10.1016/j.scriptamat.2020.09.012 ↗
44. 44. Marcos Pérez, Christian Dumont, Olivier Nodin, and Sebastien Nouveau: Mater. Charact., 2018, vol. 146, pp. 169–81.10.1016/j.matchar.2018.10.003 ↗
45. M.J. Sohrabi and H. Mirzadeh: Mater. Lett., 2020, vol. 261, pp. 127008.10.1016/j.matlet.2019.127008 ↗
46. 46. H.Y. Zhang, S.H. Zhang, M. Cheng, and Z.X. Li: Mater. Charact., 2010, vol. 61, pp. 49–53.10.1016/j.matchar.2009.10.003 ↗
47. 47. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Mater. Sci. Eng.: A, 2012, vol. 555, pp. 117–30.10.1016/j.msea.2012.06.041 ↗
48. 48. A. Chamanfar, M. Jahazi, J. Gholipour, P. Wanjara, and S. Yue: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4230–38.10.1007/s11661-013-1767-y ↗
49. 49. Hong-yan Gan, Ming Cheng, Zhen-xing Guo, Qing-an Tai, Grazhina Kozhevnikova, Hong-wu Song, and Shi-hong Zhang: J. Mater. Eng. Perform., 2020, vol. 29, pp. 3852–57.10.1007/s11665-020-04909-4 ↗
50. 50. Peihao Geng, Guoliang Qin, Tongyi Li, Jun Zhou, Zengda Zou, and Fan Yang: J. Manufact. Processes, 2019, vol. 45, pp. 100–14.10.1016/j.jmapro.2019.06.032 ↗
51. 51. F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Compd., 2016, vol. 658, pp. 981–95.10.1016/j.jallcom.2015.11.002 ↗
52. 52. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–50.10.1016/0022-3697(61)90054-3 ↗
53. 53. A. Devaux, L. Nazé, R. Molins, A. Pineau, A. Organista, J.Y. Guédou, J.F. Uginet, and P. Héritier: Mater. Sci. Eng.: A, 2008, vol. 486, pp. 117–22.10.1016/j.msea.2007.08.046 ↗
54. S. Zhang, X. Lin, L. Wang, X. Yu, H. Yang, L. Lei, and W. Huang: Mater. Sci. Eng.: A, 2021, vol. 803, pp. 140702.10.1016/j.msea.2020.140702 ↗
55. 55. R.A. Ricks, A.J. Porter, and R.C. Ecob: Acta Metall., 1983, vol. 31, pp. 43–53.10.1016/0001-6160(83)90062-7 ↗
56. 56. T. Grosdidier, A. Hazotte, and A. Simon: Mater. Sci. Eng.: A, 1998, vol. 256, pp. 183–96.10.1016/S0921-5093(98)00795-3 ↗
57. 57. Fencheng Liu, Feiyue Lyu, Fenggang Liu, Xin Lin, and Chunping Huang: J. Mater. Res. Technol., 2020, vol. 9, pp. 9753–65.10.1016/j.jmrt.2020.06.061 ↗
58. 58. Bilal Hassan and Jonathan Corney: Mater. Sci. Technol., 2017, vol. 33, pp. 1879–89.10.1080/02670836.2017.1333222 ↗
59. X. S. Xie, S. H. Fu, S. Q. Zhao, and J. X. Dong: Mater. Sci. Forum, 2010, vols. 638–642, pp. 2363–68.10.4028/www.scientific.net/MSF.638-642.2363 ↗
60. 60. S. Vernier, A. Pugliara, B. Viguier, E. Andrieu, and L. Laffont: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 6607–29.10.1007/s11661-020-06045-z ↗
61. A. Mitchell, A.J. Schmalz, C. Schvezov, and S. Cockroft: in Superalloys 718, 625 and Various Derivatives, E.A. Loria, ed., TMS-AIME, Warrendale, PA, 1994, pp. 65–78.10.7449/1994/Superalloys_1994_65_78 ↗
62. A. Mitchell: Superalloys 718, 625, 706 and Various Derivatives (2005), 2005, pp. 299–310.
63. 63. R.Y. Zhang, H.L. Qin, Z.N. Bi, J. Li, S. Paul, T.L. Lee, S.Y. Zhang, J. Zhang, and H.B. Dong: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1860–73.10.1007/s11661-020-05627-1 ↗
64. 64. J. Cormier, P. Gadaud, M. Czaplicki, R.Y. Zhang, H.B. Dong, T.M. Smith, F. Zhang, J.S. Tiley, and S.L. Semiatin: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 500-511.
65. 65. T.J. Ma, L.F. Tang, W.Y. Li, Y. Zhang, Y. Xiao, and A. Vairis: J. Manufact. Processes, 2018, vol. 34, pp. 442–50.10.1016/j.jmapro.2018.06.011 ↗
66. 66. Allan Harte, Michael Atkinson, Albert Smith, Carsten Drouven, Stefan Zaefferer, João Quinta da Fonseca, and Michael Preuss: Acta Mater., 2020, vol. 194, pp. 257–75.10.1016/j.actamat.2020.04.004 ↗
67. G. Marchese, E. Atzeni, A. Salmi, and S. Biamino: J. Mater. Eng. Perform., 2020, Vol. 30, pp. 565-574..10.1007/s11665-020-05338-z ↗
68. 68. Ahmad Chamanfar: Mining and Materials Engineering, McGill University, Montreal, 2012.
69. 69. M.P. Jackson and R.C. Reed: Mater. Sci. Eng.: A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗