journal article·2020-08

Generation and Progress Behavior of Strain-Induced Abnormally Large Grains in Superalloy 718

Chuya Aoki, Masayoshi Date, Tomonori Ueno, Takehiro Ohno, Katsunari Oikawa

Publisher page

Abstract

Herein, the behavior associated with strain-induced abnormally large grains in superalloy 718 was investigated using compression testing and subsequent heat treatment below the δ-phase solvus temperature of 980 °C. The nuclei of abnormally large grains included some grains that were newly recrystallized through nucleation. Abnormally large grains were caused by a difference in intragranular misorientation between the dynamic recrystallized grains and the deformed matrix. The initiation of abnormally large grains was retarded in response to a decrease in plastic strain, leading to the formation of microstructures consisting of larger grains with a more complex morphology. Grain boundaries migrated locally in a direction perpendicular to, or predominantly in a direction parallel to, the Σ3 {111} twin boundaries, along with the high-order twin formation. To determine the direction parallel to the Σ3 {111} twin boundaries, the regions where parent grain and dissimilar twin growth occurred in the same direction along their twin boundaries were analyzed using {110} PFs. The growth direction consisted of only one set of common 〈110〉 axes such that the arrangement of atoms was consistent. Owing to multiple twinning, abnormally large grains seemed to evolve in varying growth directions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. B. Pieraggi and J.F. Uginet: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1994, pp. 535–44.
2. J.F. Uginet and B. Pieraggi: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 1997, pp. 343–52.
3. R. Watson, M. Preuss, J. Quinta de Fonseca, T. Witulski, and G. Terlinde: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2014, pp. 873–84.
4. A. Agnoli, M. Bernacki, R. Logé, J.M. Franchet, J. Laigo, and N. Bozzolo: in Superalloys 2012, E.S. Huron et al., eds., TMS, Warrendale, PA, 2012, pp. 73–82.10.1002/9781118516430.ch8 ↗
5. A. Agnoli, M. Bernacki, R. Logé, J.M. Franchet, J. Laigo, and N. Bozzolo: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4405–21.10.1007/s11661-015-3035-9 ↗
6. R. Schwant, S. Thamboo, L. Yang, and M. Morra: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2005, pp. 15–24.
7. C. Aoki, T. Ueno, and T. Ohno: in Superalloys 2016, M. Hardy et al., eds., TMS, Warrendale, PA, 2016, pp. 609–17.10.1002/9781119075646.ch65 ↗
8. C. Aoki, T. Ueno, T. Ohno, and K. Oikawa: J. Mater. Process. Technol., 2019, vol. 267, pp. 26–33.10.1016/j.jmatprotec.2018.12.002 ↗
9. B. Flageolet, O. Yousfi, Y. Dahan, P. Villechaise, and J. Cormier: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Loria, ed., TMS, Warrendale, PA, 2010, pp. 595–606.
10. E. Huron, S. Srivatsa, and E. Raymond: Superalloys 2000, T.M. Pollock et al., TMS, Warrendale, PA, 2000, pp. 49–58.
11. V.M. Miller, A.E. Johnson, C.J. Torbet, and T.M. Pollock: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 1566–74.10.1007/s11661-016-3329-6 ↗
12. I.M.D. Parr, T.J. Jackson, M.C. Hardy, D.J. Child, C. Argyrakis, K. Severs, V. Saraf, and J.M. Stumpf: in Superalloys 2016, M. Hardy et al., eds., TMS, Warrendale, PA, 2016, pp. 447–56.10.1002/9781119075646.ch48 ↗
13. M.A. Charpagne, J.M. Franchet, and N. Bozzolo: Mater. Des., 2018, vol. 144, pp. 353–60.10.1016/j.matdes.2018.02.048 ↗
14. T.A. Bennett, P.N. Kalu, and A.D. Rollett: Scripta Mater., 2007, vol. 57, pp. 41–44.10.1016/j.scriptamat.2007.03.018 ↗
15. T.A. Bennett, P.N. Kalu, and A.D. Rollett: Microsc. Microanal., 2011, vol. 17, pp. 362–67.10.1017/S1431927611000377 ↗
16. T. Watanabe and S. Tsurekawa: Acta Mater., 1999, vol. 47, pp. 4171–85.10.1016/S1359-6454(99)00275-X ↗
17. C.A. Schuh, M. Kumar, and W.E. King: Acta Mater., 2003, vol. 51, pp. 687–700.10.1016/S1359-6454(02)00447-0 ↗
18. V. Randle: Acta Mater., 2004, vol. 52, pp. 4067–81.10.1016/j.actamat.2004.05.031 ↗
19. D.B. Bober, J. Lind, R.P. Mulay, T.J. Rupert, and M. Kumar: Acta Mater., 2017, vol. 129, pp. 500–09.10.1016/j.actamat.2017.02.051 ↗
20. C.M. Barr, A.C. Leff, R.W. Demott, R.D. Doherty, and M.L. Taheri: Acta Mater., 2018, vol. 144, pp. 281–91.10.1016/j.actamat.2017.10.007 ↗
21. T.S. Prithiv, P. Bhuyan, S.K. Pradhan, V.S. Sarma, and S. Mandal: Acta Mater., 2018, vol. 146, pp. 187–201.10.1016/j.actamat.2017.12.045 ↗
22. H. Gleiter: Acta Metall., 1969, vol. 17, pp. 1421–28.10.1016/0001-6160(69)90004-2 ↗
23. S. Mahajan, C.S. Pande, M.A. Imam, and B.B. Rath: Acta Mater., 1997, vol. 45, pp. 2633–38.10.1016/S1359-6454(96)00336-9 ↗
24. W.G. Burgers: Physica, 1949, vol. 15, pp. 92–106.10.1016/0031-8914(49)90031-2 ↗
25. M.A. Meyers and L.E. Murr: Acta Metall., 1978, vol. 26, pp. 951–62.10.1016/0001-6160(78)90046-9 ↗
26. Y. Jin, B. Lin, A.D. Rollett, G.S. Rohrer, M. Bernacki, and N. Bozzolo: J. Mater. Sci., 2015, vol. 50, pp. 5191–5203.10.1007/s10853-015-9067-0 ↗
27. D.G. Brandon: Acta Metall., 1969, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗