journal article·2018-07Open access

Soldering of Mg Joints Using Zn-Al Solders

Tomasz Gancarz, Katarzyna Berent, Wojciech Skuza, Katarzyna Janik

Abstract

Abstract Magnesium has applications in the automotive and aerospace industries that can significantly contribute to greater fuel economy and environmental conservation. The Mg alloys used in the automotive industry could reduce mass by up to 70 pct, providing energy savings. However, alongside the advantages there are limitations and technological barriers to use Mg alloys. One of the advantages concerns phenomena occurring at the interface when joining materials investigated in this study, in regard to the effect of temperature and soldering time for pure Mg joints. Eutectic Zn-Al and Zn-Al alloys with 0.05 (wt pct) Li and 0.2 (wt pct) Na were used in the soldering process. The process was performed for 3, 5, and 8 minutes of contact, at temperatures of 425 °C, 450 °C, 475 °C, and 500 °C. Selected, solidified solder-substrate couples were cross-sectioned, and their interfacial microstructures were investigated by scanning electron microscopy. The experiment was designed to demonstrate the effect of time, temperature, and the addition of Li and Na on the kinetics of the dissolving Mg substrate. The addition of Li and Na to eutectic Zn-Al caused to improve mechanical properties. Higher temperatures led to reduced joint strength, which is caused by increased interfacial reaction.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. KU Kainer (eds) (2006) Magnesium Alloys and their Applications. Wiley-Vch, New York
2. A. A. Luo, Inter. Mater. Rev. (2004) 49, 13-3010.1179/095066004225010497 ↗
3. Y. Zhang, Z. Luo, Y. Li, Z-M. Liu, Z-Y. Huang, Mat. Des. (2015) 75, 166–17310.1016/j.matdes.2015.03.030 ↗
4. J. Hirsch, T. Al-Samman, Acta Mater. (2013) 61, 818–84310.1016/j.actamat.2012.10.044 ↗
5. M. Mezbahul-Islam, A. O. Mostafa, M. Medraj, J. Mater. (2014) 2014, 1-3310.1155/2014/704283 ↗
6. F. Hayat, Mater. Des. (2011) 32, 2476–248410.1016/j.matdes.2010.11.015 ↗
7. L.M. Zhao, Z.D. Zhang, Scripta Mater. (2008) 58, 283–28610.1016/j.scriptamat.2007.10.006 ↗
8. L.M. Liu, H.Y. Wang, Mater. Sci. Eng. A (2009) 507, 22–2810.1016/j.msea.2008.11.061 ↗
9. L. Liu, Z. Wu, Mater. Character. (2010) 61, 13-1810.1016/j.matchar.2009.09.015 ↗
10. Z. Wang, H. Wang, L. Liu, Mat. Des. (2012) 39, 14–1910.1016/j.matdes.2012.02.021 ↗
11. T. Watanabe, 8 – Brazing and soldering of magnesium alloys, Welding and joining of magnesium alloys, (2010) 97-12110.1533/9780857090423.2.97 ↗
12. M. K. Kulekci, Int. J. Adv. Manuf. Technol. (2008) 39, 851-86510.1007/s00170-007-1279-2 ↗
13. T. Gancarz, G. Cempura, W. Skuza, Mater. Charact. (2016) 111, 147-15310.1016/j.matchar.2015.11.025 ↗
14. T. Gancarz, G. Cempura, Mater. Des. (2016) 104, 51-5910.1016/j.matdes.2016.05.019 ↗
15. T. Gancarz, J. Pstrus, G. Cempura, K. Berent, J. of Electron. Mater. (2016) 45, 6067-6078, http://dx.doi.org/10.1007/s11664-016-4815-810.1007/s11664-016-4815-8 ↗
16. T. Gancarz, J. Pstruś, K. Berent J. Mater. Eng. Perform. (2016) 25, 3366-3374, http://dx.doi.org/10.1007/s11665-016-2075-710.1007/s11665-016-2075-7 ↗
17. J. Pstruś, P. Fima, T. Gancarz, J. Mater. Eng. Perform. 21 (2012) 606-61310.1007/s11665-012-0174-7 ↗
18. J. Pstrus, T. Gancarz, J. Mater. Eng. Perform. (2014) 23, 1614-162410.1007/s11665-014-0942-7 ↗
19. L. Ma, D.Y. He, X.Y. Li, J.M. Jiang, Mater. Letter. (2010) 64, 596–59810.1016/j.matlet.2009.12.012 ↗
20. T. Massalski, H. Okamoto, P. Subramanian, L. Kacprzak, Binary alloy phase diagrams. United States of America: ASM International; 2001, p. 2445
21. J. R. Terbush, N. Stanford, J-F. Nie, M. R. Barnett, Metal. Mater. Trans. A (2013) 44, 5216-522410.1007/s11661-013-1872-y ↗
22. M. Prażmowski, Arch. Metall. Mater. (2014) 59, 1137-114210.2478/amm-2014-0198 ↗
23. L. Ma, D. He, X. Li, J. Jiang, J. Mater. Sci. Technol. (2010) 26, 743-74610.1016/S1005-0302(10)60117-X ↗
24. L. Ma, P. Qiaoa, W. Longa, D. Heb, X. Lib, Mater. Des. (2012) 37, 465-46910.1016/j.matdes.2012.01.005 ↗
25. T. Gancarz, J. Pstrus, P. Fima, S. Mosinska, J. Alloy Compd. (2014) 582, 313-32210.1016/j.jallcom.2013.08.055 ↗
26. Y. Takaku, L. Felicia, I. Ohnuma, R. Kainuma, K. Ishida, J. Electron. Mater. (2008) 37, 314-32310.1007/s11664-007-0344-9 ↗
27. R. Xie, X. Chen, Z. Lai, L. Liu, G. Zou, J. Yan, W. Wang, Mater. Des. (2016) 91, 19-2710.1016/j.matdes.2015.11.071 ↗
28. M.F. Wu, C. Yu, J. Pu, Mater. Sci. Technol. (2008) 24, 1422-142610.1179/174328407X236922 ↗