The Impact of Martensite Deformation on Shape Memory Effect Recovery Strain Evolution
Source abstract
Abstract
The one-way shape memory effect of polycrystalline NiTi is investigated after differential levels of martensite deformation. Martensite naturally forms an energy-minimizing configuration, referred to as self-accommodated, of differently oriented martensite variants, which are internally twinned. Stress preferentially orients a select variant that eventually detwins and plastically deforms at the highest stress levels. In this work, the underlying morphology is ascertained based on the evolution of micro-scale deformation measurements using digital image correlation analysis of three characteristic material responses. An initial martensitic structure is deformed at constant temperature. The forward austenite-to-martensite and reverse martensite-to-austenite phase transformations take place during temperature cycling under a constant stress. The austenite-to-martensite transformation is tensile stress induced at a constant temperature and initiates via a localized strain band. For the conversion of self-accommodated martensite to orientated morphology and further deformation, spatially heterogeneous strains accrue over the entire specimen surface. Shape memory recovery during heating, on the other hand, culminates with a centralized strain localization that persists as recovery approaches completion. The recovery temperature differential (A f − A s) depends on the extent of deformation. This work characterizes the influence of stress on phase transformation and martensite deformation morphology for deformation in the martensitic state compared to the stress-induced phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Paleontology and Evolutionary Biology
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. T. W. Duerig, K. N. Melton, D. Stöckel, and C. M. Wayman: Engineering Aspects of Shape Memory Alloys, Butterworth-Heinemann Ltd, London, 1990.
2. H. Funakubo: Shape Memory Alloys (Precision Machinery and Robotics), vol 1, Gordon and Breach Science Publishers, New York, NY, 1987.
3. K. Otsuka and C. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, MA, 1998.
4. K. Bhattacharya: Microstructure of Martensite: Why It Forms and How It Gives Rise to the Shape-Memory Effect, Oxford University Press, Oxford, 2003.10.1093/oso/9780198509349.001.0001 ↗
5. D.C. Lagoudas, ed.: Shape Memory Alloys: Modeling and Engineering Applications, Springer, Berlin, 2008.
6. T. Saburi and S. Nenno: in International Conference on Solid to Solid Phase Transformation, H.I. Aaronson, D.E. Laughlin, R.F. Sekerka, and C.M. Wayman, eds., Pittsburgh, 1981, pp. 1455–79.
7. K. Bhattacharya, Arch. Ration. Mech. Anal. 120, 201–44 (1992).10.1007/BF00375026 ↗
8. K. Knowles and D. Smith, Acta Metall. 29, 101–10 (1981).10.1016/0001-6160(81)90091-2 ↗
9. H. Sehitoglu, R. Hamilton, D. Canadinc, X. Y. Zhang, K. Gall, I. Karaman, Y. Chumlyakov, and H. J. Maier, Metall. Mater. Trans. A 34A, 5–13 (2003).10.1007/s11661-003-0203-0 ↗
10. K. Bhattacharya, S. Conti, and G. Zanzotto, Nature 428, 55–59 (2004).10.1038/nature02378 ↗
11. R. F. Hamilton, H. Sehitoglu, Y. Chumlyakov, and H. J. Maier, Acta Mater. 52, 3383–3402 (2004).10.1016/j.actamat.2004.03.038 ↗
12. Y. Liu, Z. Xie, J. Van Humbeeck, and L. Delaey, Scripta Mater. 41, 1273–81 (1999).10.1016/S1359-6462(99)00299-7 ↗
13. Y. Liu, Y. Liu, and J. Van Humbeeck, Acta Metall. 47, 199–209 (1999).
14. Y. Liu, Y. Liu, and J. Van Humbeeck, Acta Metall. 39, 1047–55 (1998).
15. Y. Liu, Z. L. Xie, J. Van Humbeeck, and L. Delaey, Acta Mater. 47, 645–60 (1999).10.1016/S1359-6454(98)00376-0 ↗
16. S. Daly, G. Ravichandran, and K. Bhattacharya, Acta Mater. 55, 3593–3660 (2007).10.1016/j.actamat.2007.02.011 ↗
17. C. Efstathiou, H. Sehitoglu, J. Carroll, J. Lambros, and H. J. Maier, Acta Mater. 56, 3791–99 (2008).10.1016/j.actamat.2008.04.033 ↗
18. C. Efstathiou and H. Sehitoglu, Scripta Mater. 59, 1263–66 (2008).10.1016/j.scriptamat.2008.08.030 ↗
19. R. F. Hamilton, H. Sehitoglu, K. Aslantas, C. Efstathiou, and H. J. Maier, Acta Mater. 56, 2231–36 (2008).10.1016/j.actamat.2008.01.007 ↗
20. K. Kim and S. Daly, Exp. Mech. 51, 641–52 (2010).10.1007/s11340-010-9435-2 ↗
21. M. Kimiecik, J. W. Jones, and S. Daly, Mater. Lett. 95, 25–29 (2013).10.1016/j.matlet.2012.12.063 ↗
22. K. Kim and S. Daly: Smart Mater. Struct., 2013, vol. 22, art. id. 075012.10.1088/0964-1726/22/7/075012 ↗
23. J. Frenzel, E. P. George, A. Dlouhy, C. Somsen, M. F.-X. Wagner, and G. Eggeler, Acta Mater. 58, 3444–58 (2010).10.1016/j.actamat.2010.02.019 ↗
24. Y. Liu and S. P. Galvin, Acta Mater. 45, 4431–39 (1997).10.1016/S1359-6454(97)00144-4 ↗
25. P. Sittner, Y. Liu, and V. Novak, J. Mech. Phys. Solids 53, 1719–46 (2005).10.1016/j.jmps.2005.03.005 ↗
26. T. C. Chu, W. F. Ranson, M. A. Sutton, and W. H. Peters, Exp. Mech. 25, 232–44 (1985).10.1007/BF02325092 ↗
27. M. A. Sutton, W. J. Walters, W. H. Peters, W. F. Ranson, and S. R. Mcneil, Image Vis. Comput. 1, 133–39 (1983).10.1016/0262-8856(83)90064-1 ↗
28. M.A. Sutton, C. Mingqi, W.H. Peters, Y.J. Chao, and S.R. McNeill, Image Vis. Comput. 4, 143–50 (1986).10.1016/0262-8856(86)90057-0 ↗
29. J. Van Humbeeck, Adv. Eng. Mater. 3, 837–50 (2001).10.1002/1527-2648(200111)3:11<837::AID-ADEM837>3.0.CO;2-0 ↗
30. Y. Liu and D. Favier, Acta Mater. 48, 3489–99 (2000).10.1016/S1359-6454(00)00129-4 ↗
31. G. Tan and Y. Liu, Intermetallics 12, 373–81 (2004).10.1016/j.intermet.2003.11.008 ↗
32. R. Salzbrenner and M. Cohen, Acta Metall. 27, 739–48 (1979).10.1016/0001-6160(79)90107-X ↗
33. J. Ortin and A. Planes, J. Phys. IV 1, 13–23 (1991).
34. J. Ortin and A. Planes, Acta Metall. 37, 1433–41 (1989).10.1016/0001-6160(89)90175-2 ↗