journal article·2025-05Open access

Oxygen Ingress in Titanium and Its Alloys After High-Temperature Oxidation: A Competition Between Strengthening and Embrittlement

Quentin Sirvin, Julien Genée, Benjamin Dod, Daniel Monceau, Damien Texier

Abstract

High-temperature oxidation of titanium leads to the formation of an external oxide scale and oxygen ingress into the metallic titanium material. Oxygen ingress can be significant due to the high solubility of O within Ti. An oxygen-rich layer (ORL) thus forms beneath the external oxide scale, exhibiting a brittle behavior. Microtensile specimens were used in order to exacerbate surface effects, i.e. , surface reactivity in the case of the oxidation of titanium. Playing with the specimen thickness and pre-oxidation durations, it was possible to evaluate the evolution of tensile strength as well as the reduction in ductility for deep extensions of ORL relative to the specimen thickness (high fraction of ORL). In addition, ultrathin specimen extraction at different locations within the ORL depth aimed at better identifying the gradient of properties within the ORL. This micromechanical approach was applied to a commercially pure titanium (CP-Ti grade 2) and to a structural titanium alloy (Ti6242s). Both strengthening and loss of mechanical properties (yield strength and ductility) were observed depending on the material and oxygen ingress. While CP-Ti demonstrated an increase in mechanical strength up to ORL representing 80 pct of the gage section, Ti6242s experienced a loss of mechanical resistance even for the shortest exposure times (the ORL representing 10 pct of the gage section).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Nuclear Materials and Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. J.L. Murray and H.A. Wriedt: J Phase Equilibria, 1987, vol. 8, pp. 148–65. https://doi.org/10.1007/BF02873201.10.1007/BF02873201 ↗
2. P. Kofstad, P.B. Anderson, and O.J. Krudtaa: J. Less-Common Metals, 1961, vol. 3, pp. 89–97. https://doi.org/10.1016/0022-5088(61)90001-7.10.1016/0022-5088(61)90001-7 ↗
3. C. Dupressoire, A. Rouaix-Vande Put, P. Emile, C. Archambeau-Mirguet, R. Peraldi, and D. Monceau: Oxid. Metals, 2017, vol. 87, pp. 343–53. https://doi.org/10.1007/s11085-017-9729-1.10.1007/s11085-017-9729-1 ↗
4. N. Vaché and D. Monceau: Oxid. Metals, 2020, vol. 93, pp. 215–27. https://doi.org/10.1007/s11085-020-09956-9.10.1007/s11085-020-09956-9 ↗
5. W.L. Finlay and J.A. Snyder: JOM, 1950, vol. 2, pp. 277–86. https://doi.org/10.1007/BF03399001.10.1007/BF03399001 ↗
6. C.E. Shamblen and T. Redden: in: The Science, Technology and Application of Titanium, London, 1970, pp. 199–208. https://doi.org/10.1016/B978-0-08-006564-9.50027-0.10.1016/B978-0-08-006564-9.50027-0 ↗
7. H. Conrad: Progress Mater. Sci., 1981, vol. 26, pp. 123–403. https://doi.org/10.1016/0079-6425(81)90001-3.10.1016/0079-6425(81)90001-3 ↗
8. L. Bendersky and A. Rosen: Eng. Fracture Mech., 1984, vol. 20, pp. 303–11. https://doi.org/10.1016/0013-7944(84)90135-8.10.1016/0013-7944(84)90135-8 ↗
9. R. Shenoy, J. Unnam, and R. Clark: Oxid. Metals, 1986, vol. 26, pp. 105–24. https://doi.org/10.1007/BF00664276.10.1007/BF00664276 ↗
10. J. Oh, B. Lee, S.-W. Cho, S.-W. Lee, G.-S. Choi, and J.-W. Lim: Metals Mater. Int., 2011, vol. 17, pp. 733–736. https://doi.org/10.1007/s12540-011-1006-2.10.1007/s12540-011-1006-2 ↗
11. F. B. Vicente, D. R. N. Correa, T. A. G. Donato, V. E. Arana-Chavez, M. A. R. Buzalaf, and C. R. Grandini: Materials, 2014, vol. 7, pp. 542–53. https://doi.org/10.3390/ma7010542.10.3390/ma7010542 ↗
12. H. Hornberger, C. Randow, and C. Fleck: Mater. Sci. Eng. A, 2015, vol. 630, pp. 51–57. https://doi.org/10.1016/j.msea.2015.02.006.10.1016/j.msea.2015.02.006 ↗
13. A. A. Hidalgo, T. Ebel, W. Limberg, F. Pyczak: Key Eng. Mater., 2016, vol. 704, pp. 44–52. https://doi.org/10.4028/www.scientific.net/KEM.704.44.10.4028/www.scientific.net/KEM.704.44 ↗
14. D. Satko, J. Shaffer, J. Tiley, S. Semiatin, A. Pilchak, S. Kalidindi, Y. Kosaka, M. Glavicic, and A. Salem: Acta Mater., 2016, vol. 107, pp. 377–89. https://doi.org/10.1016/j.actamat.2016.01.058.10.1016/j.actamat.2016.01.058 ↗
15. C. M. Magazzeni, H. M. Gardner, I. Howe, P. Gopon, J. C. Waite, D. Rugg, D. E. Armstrong, and A. J. Wilkinson: J. Mater. Res., 2021, vol. 36, pp. 2235–50. https://doi.org/10.1557/s43578-020-00035-y.10.1557/s43578-020-00035-y ↗
16. Z. Cai, T. Xiang, W. Bao, J. Chen, T. Gao, G. Xie: Mater. Sci., SSRN Electron. J., 2022, vol. 14.
17. D. Texier, Q. Sirvin, A. Dziri, H. Proudhon, V. Yastrebov, and M. Legros: in: Titanium 2023, Edinburgh, 2023, p. 143806.
18. D. Texier, A. Palchoudhary, J. Genée, Q. Sirvin, Y. Zhang, G. Kermouche, D. Monceau, D. Poquillon, and E. Andrieu: Corros. Sci., 2024, vol. 235, p. 112177. https://doi.org/10.1016/j.corsci.2024.112177.10.1016/j.corsci.2024.112177 ↗
19. Y. Lee and G. Welsch: Mater. Sci. Eng., A, 1990, vol. 128, pp. 77–89. https://doi.org/10.1016/0921-5093(90)90097-M.10.1016/0921-5093(90)90097-M ↗
20. M. C. Brandes, M. Baughman, M. J. Mills, and J.C. Williams: Mater. Sci. Eng. A, 2012, vol. 551, pp. 13–18. https://doi.org/10.1016/j.msea.2012.04.058.10.1016/j.msea.2012.04.058 ↗
21. P. Kwasniak, M. Muzyk, H. Garbacz, and K. Kurzydlowski: Mater. Sci. Eng. A, 2014, vol. 590, pp. 74–79. https://doi.org/10.1016/j.msea.2013.10.004.10.1016/j.msea.2013.10.004 ↗
22. J. Baillieux, C. Archambeau, P. Emile, and D. Poquillon: in: CFM2015, Lyon, 2015, pp. 22–25.
23. D. Texier, T. Richeton, H. Proudhon, A. Dziri, Q. Sirvin, and M. Legros: Mater. Charact., 2024, vol. 216, p. 114244. https://doi.org/10.1016/j.matchar.2024.114244.10.1016/j.matchar.2024.114244 ↗
24. C. Beevers and J. Robinson: J. Less-Common Metals, 1969, vol. 17, pp. 345–52. https://doi.org/10.1016/0022-5088(69)90061-7.10.1016/0022-5088(69)90061-7 ↗
25. G. Baur and P. Lehr: J. Less-Common Metals, 1980, vol. 69, pp. 203–18. https://doi.org/10.1016/0022-5088(80)90055-7.10.1016/0022-5088(80)90055-7 ↗
26. M. Wasz, F. Brotzen, R. McLellan, and A. Griffin: Int. Mater. Rev., 1996, vol. 41, pp. 1–12. https://doi.org/10.1179/imr.1996.41.1.1.10.1179/imr.1996.41.1.1 ↗
27. T.A. Parthasarathy, W.J. Porter, S. Boone, R. John, and P. Martin: Scripta Mater., 2011, vol. 65, pp. 420–23. https://doi.org/10.1016/j.scriptamat.2011.05.025.10.1016/j.scriptamat.2011.05.025 ↗
28. M. Yan, W. Xu, M. S. Dargusch, H. P. Tang, M. Brandt, and M. Qian: Powder Metall., 2014, vol. 57, pp. 251–57. https://doi.org/10.1179/1743290114Y.0000000108.10.1179/1743290114Y.0000000108 ↗
29. J. Q. Ren, Q. Wang, X. F. Lu, W. F. Liu, P. L. Zhang, and X. B. Zhang: Mater. Sci. Eng. A, 2018, vol. 731, pp. 530–38. https://doi.org/10.1016/j.msea.2018.06.083.10.1016/j.msea.2018.06.083 ↗
30. D. Texier, Q. Sirvin, V. Velay, M. Salem, D. Monceau, B. Mazères, E. Andrieu, R. Roumiguier, and B. Dod: MATEC Web Conf., 2020, vol. 321, p. 06004. https://doi.org/10.1051/matecconf/202032106004.10.1051/matecconf/202032106004 ↗
31. A. Casadebaigt, J. Hugues, and D. Monceau: Corros. Sci., 2020, vol. 175, 108875. https://doi.org/10.1016/j.corsci.2020.108875.10.1016/j.corsci.2020.108875 ↗
32. Q. Sirvin, D. Texier, J. Genée, V. Velay, D. Monceau, and B. Dod: in: Titanium 2023, Edimbourg, 2023.
33. A. Amherd Hidalgo, T. Ebel, R. Frykholm, E. Carreño-Morelli, and F. Pyczak: Mater. Today Commun., 2023, vol. 34. https://doi.org/10.1016/j.mtcomm.2022.104982.10.1016/j.mtcomm.2022.104982 ↗
34. F. Amann, R. Poulain, S. Delannoy, J. Couzinié, E. Clouet, I. Guillot, and F. Prima: Mater. Sci. Eng. A, 2023, vol. 867, p. 144720. https://doi.org/10.1016/j.msea.2023.144720.10.1016/j.msea.2023.144720 ↗
35. A. Casadebaigt, D. Monceau, and J. Hugues: Oxygen Embrittlement Kinetics at 500–600° C of the Ti–6Al–4V Alloy Fabricated by Laser and Electron Powder Bed Fusion. High Temp. Corros. Mater. 2024, vol. 101, p. 107–122. https://doi.org/10.1007/s11085-024-10249-8.10.1007/s11085-024-10249-8 ↗
36. B. Barkia, V. Doquet, J. P. Couzinié, I. Guillot, and E. Héripré: Mater. Sci. Eng., A, 2015, vol. 636, pp. 91–102. https://doi.org/10.1016/j.msea.2015.03.044.10.1016/j.msea.2015.03.044 ↗
37. R. Poulain, S. Delannoy, J.-P. Couzinié, I. Guillot, E. Clouet, and F. Prima: MATEC Web of Conf., 2020, vol. 321, p. 05012. https://doi.org/10.1051/matecconf/202032105012.10.1051/matecconf/202032105012 ↗
38. Y. Chong, R. Zhang, M.S. Hooshmand, S. Zhao, D.C. Chrzan, M. Asta, J.W. Morris, and A.M. Minor: Nat. Commun., 2021, vol. 12, pp. 1–9. https://doi.org/10.1038/s41467-021-26374-w.10.1038/s41467-021-26374-w ↗
39. R. Poulain, F. Amann, J. Deya, J. Bourgon, S. Delannoy, and F. Prima: Mater. Lett., 2022, vol. 317, p. 132114. https://doi.org/10.1016/j.matlet.2022.132114.10.1016/j.matlet.2022.132114 ↗
40. Y. Fu, W. Xiao, S. Zhao, L. Ren, J. Wang, J. Rong, J. Li, X. Zhao, and C. Ma: Scripta Mater., 2023, vol. 226, p. 115236. https://doi.org/10.1016/j.scriptamat.2022.115236.10.1016/j.scriptamat.2022.115236 ↗
41. C. Romain, D. Texier, C. Desgranges, J. Cormier, S. Knittel, D. Monceau, and D. Delagnes: Oxid. Metals, 2021, vol. 96, pp. 169–82. https://doi.org/10.1007/s11085-021-10075-2.10.1007/s11085-021-10075-2 ↗
42. K. Cave, D. Texier, E. Fessler, D. Monceau, and D. Poquillon: Metall. Mater. Trans. A, 2023, vol. 54, pp. 549–61. https://doi.org/10.1007/s11661-022-06898-6.10.1007/s11661-022-06898-6 ↗
43. D. Texier, D. Monceau, J.-C. Salabura, R. Mainguy, and E. Andrieu: Mater. High Temp., 2016, vol. 33, pp. 325–37. https://doi.org/10.1080/09603409.2016.1182250.10.1080/09603409.2016.1182250 ↗
44. J.-c. Passieux, R. Bouclier, and J.-n. Périé: Exp. Mech., 2018, vol. 58, pp. 1195–206. https://doi.org/10.1007/s11340-018-0387-2.10.1007/s11340-018-0387-2 ↗
45. K. Cavé, D. Texier, S. Vallot, N. Chanfreau, E. Fessler, M. Dehmas, D. Monceau, and D. Poquillon: Effect of creep loading on the oxygen diffusion of Ti6242S at 650° C. Scripta Material., 2024, vol. 238, p. 115748. https://doi.org/10.1016/j.scriptamat.2023.11574810.1016/j.scriptamat.2023.115748 ↗
46. J. Baillieux, D. Poquillon, and B. Malard: J. Appl. Crystallogr., 2016, vol. 49, pp. 175–81. https://doi.org/10.1107/S1600576715022906.10.1107/S1600576715022906 ↗
47. K. Gautier, E. Epifano, T. Gheno, D. Connétable, and D. Monceau: Corros. Sci., 2024, vol. 237, p. 112330. https://doi.org/10.1016/j.corsci.2024.112330.10.1016/j.corsci.2024.112330 ↗
48. R. Hielscher and H. Schaeben: J. Appl. Crystallogr., 2008, vol. 41, pp. 1024–37. https://doi.org/10.1107/S0021889808030112.10.1107/S0021889808030112 ↗
49. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.-Y. Tinevez, D. James White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82. https://doi.org/10.1016/B978-0-12-415853-5.00046-7.10.1016/B978-0-12-415853-5.00046-7 ↗
50. A. Fick: Annalen der Physik, 1855, vol. 170, pp. 59–86. https://doi.org/10.1002/andp.18551700105.10.1002/andp.18551700105 ↗
51. N. Vaché, Y. Cadoret, B. Dod, and D. Monceau: Corros. Sci., 2021, vol. 178, p. 109041. https://doi.org/10.1016/j.corsci.2020.109041.10.1016/j.corsci.2020.109041 ↗
52. E. Hall: Proc. Phys. Soc., 1951, vol. 64, pp. 747–53. https://doi.org/10.1088/0370-1301/64/9/303.10.1088/0370-1301/64/9/303 ↗
53. N. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28. https://doi.org/10.1007/BF01972547.10.1007/BF01972547 ↗
54. M. Hooshmand, C. Niu, D. Trinkle, and M. Ghazisaeidi: Acta Mater., 2018, vol. 156, pp. 11–19. https://doi.org/10.1016/j.actamat.2018.05.076.10.1016/j.actamat.2018.05.076 ↗
55. X. Chen, L. Huang, Y. Jiao, S. Wang, Q. An, Y. Bao, and L. Geng: Mater. Lett., 2021, vol. 286, p. 129230. https://doi.org/10.1016/j.matlet.2020.129230.10.1016/j.matlet.2020.129230 ↗
56. H.H. Wu and D.R. Trinkle: Phys. Rev. Lett., 2011, vol. 107, p. 045504. https://doi.org/10.1103/PhysRevLett.107.045504.10.1103/PhysRevLett.107.045504 ↗
57. H.H. Wu and D.R. Trinkle: J. Appl. Phys., 2013, vol. 113, pp. 223504. https://doi.org/10.1063/1.4808283.10.1063/1.4808283 ↗
58. M. Song, S. Han, D. Min, G. Choi, and J. Park: Scripta Mater., 2008, vol. 59, pp. 623–26. https://doi.org/10.1016/j.scriptamat.2008.05.037.10.1016/j.scriptamat.2008.05.037 ↗
59. Z. Liu and G. Welsch, Metall. Trans. A, 1988, vol. 19, pp. 1121–25. https://doi.org/10.1007/BF02628396.10.1007/BF02628396 ↗
60. R. Armstrong: J. Mech. Phys. Solids, 1961, vol. 9, pp. 196–99. https://doi.org/10.1016/0022-5096(61)90018-7.10.1016/0022-5096(61)90018-7 ↗
61. A. Thompson: Scripta Metall., 1974, vol. 8, pp. 145–48. https://doi.org/10.1017/CBO9781107415324.004.10.1017/CBO9781107415324.004 ↗
62. N. Hansen: Acta Metall., 1977, vol. 25, pp. 863–69. https://doi.org/10.1016/0001-6160(77)90171-7.10.1016/0001-6160(77)90171-7 ↗
63. S. Miyazaki, K. Shibata, and H. Fujita: Acta Metall., 1979, vol. 27, pp. 855–62. https://doi.org/10.1016/0001-6160(79)90120-2.10.1016/0001-6160(79)90120-2 ↗
64. C. Thompson: J. Mater. Res., 1993, vol. 8, pp. 237–38.10.1557/JMR.1993.0237 ↗
65. C. Keller, E. Hug, and X. Feaugas: Int. J. Plast., 2011, vol. 27, pp. 635–54. https://doi.org/10.1016/j.ijplas.2010.08.002.10.1016/j.ijplas.2010.08.002 ↗
66. E. Hug, P. Dubos, C. Keller, L. Duchěne, and A. Habraken: Mech. Materi., 2015, vol. 91, pp. 136–51. https://doi.org/10.1016/j.mechmat.2015.07.001.10.1016/j.mechmat.2015.07.001 ↗
67. D. Texier, J. Genée, V. Velay, A. C. Moreno, D. Monceau, and E. Andrieu: Int. J. Plast., 2025, vol. 188, p. 104284. https://doi.org/10.1016/j.ijplas.2025.104284.10.1016/j.ijplas.2025.104284 ↗
68. K. Cave, D. Texier, E. Fessler, D. Monceau, and D. Poquillon: Metall. Mater. Trans. A, 2023, vol. 54, pp. 549–61. https://doi.org/10.1007/s11661-022-06898-6.10.1007/s11661-022-06898-6 ↗