journal article·2024-03Open access

Thermodynamic Approach to Describe the Martensite Phase Transformation Kinetics via the Stabilization of Austenite

Steve Gaudez, Juan Macchi, Guillaume Geandier, Sabine Denis, Sébastien Y. P. Allain

Abstract

This study investigated the spread of the martensite transformation, i.e., the extent of the transformation as a function of the temperature, via the development of a model focusing on thestabilization of residual austenite along the transformation rather than describing the nucleation processes of each individual unit of martensite. The stabilization of the retained austenite is described in a thermodynamic framework accounting for the chemical composition, grain sizes, stress state, dislocation density, and temperature effects. In situ X-ray diffraction experiment was performed at synchrotron PETRA III (Hamburg, Germany) on a low-alloyed steel to support the theoretical development. Among others, the martensite transformation kinetic as well as the lattice parameter and dislocation density of austenite were measured during the transformation. In order to describe the refinement of austenite grains during the transformation the initial prior austenite grain size distribution was determined by thermal etching. A good agreement of up to 60 to 70 pct of the martensite transformation upon cooling is found between the results of the model and the experiment. The results show that the major contribution to the spread of the transformation is the austenite refinement during the transformation itself. For higher martensite fractions the discrepancy observed is attributed to the simple description of austenite refinement used. In addition, the spread of the martensite transformation is shown to be linked with the change of the chemical driving force related to the steel composition, with the C showing the highest effect. New coefficients, based on numerical calculations, for the rate parameter (a) of the martensite transformation were proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (77)

Show source-provided references
1. E. Pereloma and D.V. Edmonds: Phase Transformations in Steels: Diffusionless Transformations, High Strength Steels, Modelling and Advanced Analytical Techniques, Elsevier, Burlington, 2012.10.1533/9780857096104 ↗
2. G. Badinier, C. Sinclair, S. Allain, F. Danoix, and M. Gouné: Reference Module in Materials Science and Materials Engineering, Elsevier, New York, 2017.
3. S. Banerjee and R. Krishnan: Acta Metall., 1971, vol. 19, pp. 317–1326.10.1016/0001-6160(71)90068-X ↗
4. B. Strauss, F. Frey, W. Petry, J. Trampenau, K. Nicolaus, S.M. Shapiro, and J. Bossy: Phys. Rev. B, 1996, vol. 54, pp. 6035–38.10.1103/PhysRevB.54.6035 ↗
5. T. Ahmed and H. Rack: Mater. Sci. Eng. A, 1998, vol. 243, pp. 206–11.10.1016/S0921-5093(97)00802-2 ↗
6. J. Lang and A. Williams: J. Archaeol. Sci., 1975, vol. 2, pp. 199–207.10.1016/0305-4403(75)90057-6 ↗
7. J. Lang: Britannia, 1988, vol. 19, pp. 199–216.10.2307/526199 ↗
8. A. Shibli and F. Starr: Int. J. Press. Vessels Pip., 2007, vol. 84, pp. 114–22.10.1016/j.ijpvp.2006.11.002 ↗
9. C. Barras and K. Myers: Eur. J. Vasc. Endovasc. Surg., 2000, vol. 19, pp. 564–69.10.1053/ejvs.2000.1111 ↗
10. S. Aoued, F. Danoix, S.Y. Allain, S. Gaudez, G. Geandier, J.-C. Hell, M. Soler, and M. Gouné: Metals, 2020, https://doi.org/10.3390/met10101335.10.3390/met10101335 ↗
11. J. Speer, D. Matlock, B. De Cooman, and J. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
12. N. Fonstein, R. Rana, and S.B. Singh: Automotive Steels, Woodhead Publishing, Duxford, 2017, pp. 169–216.10.1016/B978-0-08-100638-2.00007-9 ↗
13. G. Krauss: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 40–57.10.1016/S0921-5093(99)00288-9 ↗
14. P.K. Tripathi, S. Karewar, Y.C. Lo, and S. Bhowmick: Materialia, 2021, vol. 16, p. 101085.10.1016/j.mtla.2021.101085 ↗
15. S. Karewar, J. Hidalgo, J. Sietsma, and M.J. Santofimia: J. Mater. Sci., 2022, vol. 57(37), pp. 17678–99.10.1007/s10853-022-07668-w ↗
16. Z.Z. Wei, X. Ma, C.B. Ke, and X.P. Zhang: J. Mater. Sci., 2022, vol. 57(42), pp. 19857–71.10.1007/s10853-022-07894-2 ↗
17. C. Cayron: Acta Mater., 2015, vol. 96, pp. 189–202.10.1016/j.actamat.2015.06.010 ↗
18. C. Cayron: Crystals, 2018, vol. 8, p. 181.10.3390/cryst8040181 ↗
19. P. Kelly, E. Pereloma, and D.V. Edmonds: Phase Transformations in Steels, Woodhead Publishing Series in Metals and Surface Engineering, vol. 2, Woodhead Publishing, Duxford, 2012, pp. 3–33.10.1533/9780857096111.1.3 ↗
20. P. Maugis: J. Phase. Equilibria. Diffus., 2020, vol. 41, pp. 269–75.10.1007/s11669-020-00816-2 ↗
21. A. Shibata, T. Murakami, S. Morito, T. Furuhara, and T. Maki: Mater. Trans., 2008, vol. 49, pp. 1242–48.10.2320/matertrans.MRA2007296 ↗
22. S. Morito, Y. Edamatsu, K. Ichinotani, T. Ohba, T. Hayashi, Y. Adachi, T. Furuhara, G. Miyamoto, and N. Takayama: J. Alloys Compd., 2013, vol. 577, pp. S587-592.10.1016/j.jallcom.2012.02.004 ↗
23. N. Nakada, Y. Ishibashi, T. Tsuchiyama, and S. Takaki: Acta Mater., 2016, vol. 110, pp. 95–102.10.1016/j.actamat.2016.03.048 ↗
24. J. Macchi, S. Gaudez, G. Geandier, J. Teixeira, S. Denis, F. Bonnet, and S.Y. Allain: Mater. Sci. Eng. A, 2021, vol. 800, p. 140249.10.1016/j.msea.2020.140249 ↗
25. S. Gaudez, J. Teixeira, S. Denis, G. Geandier, and S.Y. Allain: Mater Charact, 2022, vol. 185, p. 111740.10.1016/j.matchar.2022.111740 ↗
26. G. Ghosh and G. Olson: Acta. Metal. Mater., 1994, vol. 42, pp. 3361–70.10.1016/0956-7151(94)90468-5 ↗
27. G. Ghosh and G. Olson: Acta. Metal. Mater., 1994, vol. 42, pp. 3371–79.10.1016/0956-7151(94)90469-3 ↗
28. E. Galindo-Nava: Scripta Mater., 2017, vol. 138, pp. 6–11.10.1016/j.scriptamat.2017.05.026 ↗
29. E. Machlin and M. Cohen: JOM, 1951, vol. 3, pp. 746–54.10.1007/BF03397387 ↗
30. A. Entwisle: Metall. Trans., 1971, vol. 2, pp. 2395–2407.10.1007/BF02814877 ↗
31. Y. Li, D.S. Martín, J. Wang, C. Wang, and W. Xu: J. Mater. Sci. Technol., 2021, vol. 91, pp. 200–14.10.1016/j.jmst.2021.03.020 ↗
32. W. Gong, S. Harjo, Y. Tomota, S. Morooka, T. Kawasaki, A. Shibata, and N. Tsuji: Acta Mater., 2023, vol. 250, p. 118860.10.1016/j.actamat.2023.118860 ↗
33. J. Patel and M. Cohen: Acta. Metal., 1953, vol. 1, pp. 531–38.10.1016/0001-6160(53)90083-2 ↗
34. S. van Bohemen and L. Morsdorf: Acta Mater., 2017, vol. 125, pp. 401–15.10.1016/j.actamat.2016.12.029 ↗
35. S. Ebner, C. Suppan, A. Stark, R. Schnitzer, and C. Hofer: Mater. Des., 2019, vol. 178, p. 107862.10.1016/j.matdes.2019.107862 ↗
36. M. Santofimia, J. Speer, A. Clarke, L. Zhao, and J. Sietsma: Acta Mater., 2009, vol. 57, pp. 4548–57.10.1016/j.actamat.2009.06.024 ↗
37. N. Maruyama, S. Tabata, and H. Kawata: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 1085–97.10.1007/s11661-019-05617-y ↗
38. S. Chatterjee, H.-S. Wang, J.R. Yang, and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2006, vol. 22, pp. 641–44.10.1179/174328406X86128 ↗
39. D. Koistinen and R. Marburger: Acta. Metal., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
40. S.M.C. van Bohemen: Mater. Sci. Technol., 2012, vol. 28, pp. 487–95.10.1179/1743284711Y.0000000097 ↗
41. J.L. Collet, M. Caruso, G. Lannoo, S. Cobo, S. Van Bohemen, D. Ponge, C. Tasan, L. Morsdorf, L. Bracke, and L. M. Sanchez: Technical report, Research fund for coal and steel, (2018).
42. M. Cohen: Mater. Trans. JIM, 1992, vol. 33, pp. 178–83.10.2320/matertrans1989.33.178 ↗
43. Y. Li, L. Wang, K. Zhu, C. Wang, and W. Xu: Mater. Des., 2022, vol. 219, p. 110768.10.1016/j.matdes.2022.110768 ↗
44. S. Allain, O. Bouaziz, and M. Takahashi: ISIJ Int., 2012, vol. 52, pp. 717–22.10.2355/isijinternational.52.717 ↗
45. M.C. McGrath, D.C. Van Aken, N. Medvedeva, and J.E. Medvedeva: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 4634–43.10.1007/s11661-013-1820-x ↗
46. L. Morsdorf, O. Jeannin, D. Barbier, M. Mitsuhara, D. Raabe, and C. Tasan: Acta Mater., 2016, vol. 121, pp. 202–14.10.1016/j.actamat.2016.09.006 ↗
47. L. Wang, Y. Wu, W. Sun, Y. Bréchet, L. Brassart, A. Arlazarov, and C. Hutchinson: Acta Mater., 2020, vol. 199, pp. 613–32.10.1016/j.actamat.2020.08.067 ↗
48. J. Kieffer, V. Valls, N. Blanc, and C. Hennig: J. Synchrotron Radiat., 2020, vol. 27, pp. 558–66.10.1107/S1600577520000776 ↗
49. C.G. de Andrés, F. Caballero, C. Capdevila, and D.S. Martín: Mater Charact, 2002, vol. 49, pp. 121–27.10.1016/S1044-5803(03)00002-0 ↗
50. S. van Bohemen: Scripta Mater., 2013, vol. 69, pp. 315–18.10.1016/j.scriptamat.2013.05.009 ↗
51. S.Y.P. Allain, S. Gaudez, G. Geandier, J.-C. Hell, M. Gouné, F. Danoix, M. Soler, S. Aoued, and A. Poulon-Quintin: Mater. Sci. Eng. A, 2018, vol. 710, pp. 245–50.10.1016/j.msea.2017.10.105 ↗
52. C. Kittel: Introduction to Solid State Physics, Wiley, New York, 2005.
53. F. Bruneseaux: Ph.D. thesis, Institut National Polytechnique de Lorraine (2008).
54. M. Dehmas, F. Bruneseaux, G. Geandier, E. Gautier, B. Appolaire, S. Denis, B. Denand, A. Settefrati, A. Mauro, M. Peel, G. Gonzales Aviles, and T. Buslaps: Mater. Tech., 2009, vol. 97, pp. 61–69.10.1051/mattech/2010012 ↗
55. M. Villa, F. Niessen, and M. Somers: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 28–40.10.1007/s11661-017-4387-0 ↗
56. J. Christian: Proceedings of the international conference on martensitic transformations ICOMAT. 1979.
57. T. Mura: Micromechanics of Defects in Solids, Springer, New York, 2013.
58. C. Celada-Casero, J. Sietsma, and M.J. Santofimia: Mater. Des., 2019, vol. 167, p. 107625.10.1016/j.matdes.2019.107625 ↗
59. M. Agnani, O. DeNonno, K. Findley, and S. Thompson: J. Mater. Eng. Perform., 2020, vol. 29, pp. 3551–59.10.1007/s11665-020-04714-z ↗
60. E. Gautier, J. Zhang, Y. Wen, and S. Denis: TMS Annual Meeting, 2000, pp. 291–306.
61. J. Guimarães and P. Rios: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1928–35.10.1007/s11661-010-0239-x ↗
62. J. Guimarães and P. Rios: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2218–24.10.1007/s11661-012-1102-z ↗
63. S. Morito, H. Saito, T. Ogawa, T. Furuhara, and T. Maki: ISIJ Int., 2005, vol. 45, pp. 91–94.10.2355/isijinternational.45.91 ↗
64. T. Furuhara, K. Kikumoto, H. Saito, T. Sekine, T. Ogawa, S. Morito, and T. Maki: ISIJ Int., 2008, vol. 48, pp. 1038–45.10.2355/isijinternational.48.1038 ↗
65. G. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
66. G. Ghosh and G. Olson: J. Phase Equilibria, 2001, vol. 22, pp. 199–207.10.1361/105497101770338653 ↗
67. E.M. Breinan and G.S. Ansell: Metall. Trans., 1970, vol. 1, pp. 1513–20.10.1007/BF02641994 ↗
68. P. Brofman and G. Ansell: Mater. Trans. A, 1983, vol. 14, pp. 1929–31.10.1007/BF02645565 ↗
69. S. Denis, E. Gautier, A. Simon, and G. Beck: Mater. Sci. Technol., 1985, vol. 1, pp. 805–14.10.1179/mst.1985.1.10.805 ↗
70. M. Shamsujjoha: Mater. Sci. Eng. A, 2020, vol. 776, p. 139039.10.1016/j.msea.2020.139039 ↗
71. J. Macchi: Ph.D. thesis, Université de Lorraine (2022).
72. Z.S. Basinski, W. Hume-Rothery, and A. Sutton: Proc. Math. Phys. Eng. Sci., 1955, vol. 229, pp. 459–67.
73. J. Moyer and G. Ansell: Mater. Trans. A, 1975, vol. 6, pp. 1785–91.10.1007/BF02642308 ↗
74. G. Ghosh and G. Olson: Acta Mater., 2002, vol. 50, pp. 2655–75.10.1016/S1359-6454(02)00096-4 ↗
75. J. Kundin, D. Raabe, and H. Emmerich: J. Mech. Phys. Solids, 2011, vol. 59, pp. 2082–2102.10.1016/j.jmps.2011.07.001 ↗
76. R. Brook, A. Entwisle, and E. Ibrahim: Iron Steel Res. Int., 1960, vol. 195, pp. 292–98.
77. S.M.C. van Bohemen and J. Sietsma: Mater. Sci. Technol., 2009, vol. 25, pp. 1009–12.10.1179/174328408X365838 ↗