journal article·2023-06Open access

Influence of the Cooling Rate on Mechanical and Corrosion Properties of Ferritic Si–Mo Ductile Cast Iron

Gaetano Palumbo, Marcin Górny, Adam Bitka

Abstract

Abstract In this study, the effect of the cooling rate controlled by different castings thickness ranging from 3 to 25 mm on the mechanical and corrosion behavior of Si–Mo ductile iron (DI) castings was investigated. SEM-EBSD investigations demonstrated that the nodule counts, nodularity, and ferrite phase increased while the ferritic grain size decreased with decreasing in the casting wall thickness; this in turn led to improvements in the tensile properties of the DI. The corrosion behavior of Si–Mo DI castings was investigated after different immersion times in a 3.5 wt pct NaCl solution via electrochemical experiments. The electrochemical results showed that the corrosion resistance of Si–Mo DI decreased in the following order: 3 > 5 > 13 > 25 mm. The results indicated that all of the tested DI samples exhibited galvanic corrosion between the nobler carbide and ferritic matrix phases. SEM analysis showed that the dissolution of the ferrite phase with the pearlite phase exposed and accumulated on the DI’s surface, which led to intense corrosion acceleration. The higher corrosion rates that were observed for those samples with higher casting wall thicknesses could be associated with the higher contents of pearlite/carbide.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. B. Black, G. Burger, R. Logan, R. Perrin, and R. Gundlach: SAE Technical Paper 2002-01-2115, 2002, vol. 111, pp. 976–91. https://doi.org/10.4271/2002-01-211510.4271/2002-01-2115 ↗
2. EN 16124, Founding Low-Alloyed Feritic Spheroidal Graphite Cast Irons for Elevated Temperature Applications, 2011.
3. P. Matteis, G. Scavino, A. Castello, and D. Firrao: Procedia Mater. Sci., 2014, vol. 3, pp. 2154–59. https://doi.org/10.1016/j.mspro.2014.06.349.10.1016/j.mspro.2014.06.349 ↗
4. D. Pierce, A. Haynes, J. Hughes, R. Graves, P. Maziasz, G. Muralidharan, A. Shyam, B. Wang, R. England, and C. Daniel: Prog. Mater. Sci., 2019, vol. 103, pp. 109–79. https://doi.org/10.1016/j.pmatsci.2018.10.004.10.1016/j.pmatsci.2018.10.004 ↗
5. S. Xiang, S. Jonsson, P. Hedström, B. Zhu, and J. Odqvist: Int. J. Fatigue, 2021, vol. 143, p. 105984. https://doi.org/10.1016/j.ijfatigue.2020.105984.10.1016/j.ijfatigue.2020.105984 ↗
6. K.H. Choe, S.M. Lee, and K.W. Lee: Mater. Sci. Forum, 2010, vol. 654–656, pp. 542–45. https://doi.org/10.4028/www.scientific.net/MSF.654-656.542.10.4028/www.scientific.net/MSF.654-656.542 ↗
7. D. Li, R. Perrin, G. Burger, D. McFarlan, B. Black, R. Logan, and R. Williams: SAE Technical Paper 2004-01-0792, 2004. https://doi.org/10.4271/2004-01-079210.4271/2004-01-0792 ↗
8. S. Xiang. Oxidation, Creep and Fatigue Synergies in Cast Materials for Exhaust Manifolds. KTH Royal Institute of Technology, 2021.
9. K. L. Choe, K.; Kim, M. In Proceedings of the International Conference on Materials; Environmental and Biological Engineering (MEBE 2015), Guilin, China, 2015.
10. S. Xiang, P. Hedström, B. Zhu, J. Linder, and J. Odqvist: Int. J. Fatigue, 2020, vol. 140, p. 105781. https://doi.org/10.1016/j.ijfatigue.2020.105781.10.1016/j.ijfatigue.2020.105781 ↗
11. M. Stawarz and P.M. Nuckowski: Materials, 2020, vol. 13, p. 1745. https://doi.org/10.3390/ma13071745.10.3390/ma13071745 ↗
12. S.N. Lekakh, A. Bofah, R. Osei, R. O’Malley, L. Godlewski, and M. Li: Oxid. Met., 2021, vol. 95, pp. 251–68. https://doi.org/10.1007/s11085-021-10022-1.10.1007/s11085-021-10022-1 ↗
13. A.D. Sosa, M.D. Echeverría, O.J. Moncada, N. Míngolo, and J.A. Sikora: J. Mater. Process. Technol., 2009, vol. 209, pp. 5545–51. https://doi.org/10.1016/j.jmatprotec.2009.05.010.10.1016/j.jmatprotec.2009.05.010 ↗
14. M. Górny, M. Kawalec, B. Gracz, and M. Tupaj: Metals, 2021, vol. 11, p. 1634. https://doi.org/10.3390/met11101634.10.3390/met11101634 ↗
15. K.M. Ibrahim and Y. Fouad: Int. J. Cast Met. Res., 2013, vol. 26, pp. 184–91. https://doi.org/10.1179/1743133613Y.0000000056.10.1179/1743133613Y.0000000056 ↗
16. M. Górny and M. Kawalec: J. Mater. Eng. Perform., 2013, vol. 22, pp. 1519–24. https://doi.org/10.1007/s11665-012-0432-8.10.1007/s11665-012-0432-8 ↗
17. M. Youssef, A. Nofal, and A. Hussein: Mater. Sci. Forum, 2018, vol. 925, pp. 231–38. https://doi.org/10.4028/www.scientific.net/MSF.925.231.10.4028/www.scientific.net/MSF.925.231 ↗
18. G. Angella, R. Donnini, D. Ripamonti, M. Górny, and F. Zanardi: Metals, 2019, vol. 9, p. 1019. https://doi.org/10.3390/met9091019.10.3390/met9091019 ↗
19. M. Benedetti, V. Fontanari, and D. Lusuardi: Eng. Fract. Mech., 2019, vol. 206, pp. 427–41. https://doi.org/10.1016/j.engfracmech.2018.12.019.10.1016/j.engfracmech.2018.12.019 ↗
20. X. Hao, J. Dong, I.-I.N. Etim, J. Wei, and W. Ke: Corros. Sci., 2016, vol. 110, pp. 296–304. https://doi.org/10.1016/j.corsci.2016.04.042.10.1016/j.corsci.2016.04.042 ↗
21. X. Hao, X. Zhao, H. Chen, B. Huang, J. Ma, C. Wang, and Y. Yang: J. Mater. Res. Technol., 2021, vol. 12, pp. 399–411. https://doi.org/10.1016/j.jmrt.2021.02.095.10.1016/j.jmrt.2021.02.095 ↗
22. J. Wei, Y. Zhou, J. Dong, X. He, and W. Ke: Materialia, 2019, vol. 6, p. 100316. https://doi.org/10.1016/j.mtla.2019.100316.10.1016/j.mtla.2019.100316 ↗
23. G. Palumbo, M. Górny, and J. Banaś: J. Mater. Eng. Perform., 2019, vol. 28, pp. 6458–70. https://doi.org/10.1007/s11665-019-04379-3.10.1007/s11665-019-04379-3 ↗
24. S.N. Lekakh, A. Bofah, L.A. Godlewski, and M. Li: Metals, 2022, vol. 12, p. 66. https://doi.org/10.3390/met12040661.10.3390/met12040661 ↗
25. F. Neuman: The influence of additional elements on the physic-chemical behaviour of carbon in saturated molten iron, in Recent Research on Cast Iron. H.D. Merchant, ed., Gordon and Breach, New York, 1968, pp. 659–703.
26. ASTM-G102, Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, 1994.
27. M.A. Sheikh and J. Iqbal: J. Rare Earths, 2007, vol. 25, pp. 533–36. https://doi.org/10.1016/S1002-0721(07)60557-2.10.1016/S1002-0721(07)60557-2 ↗
28. J.O. Choi, J.Y. Kim, C.O. Choi, J.K. Kim, and P.K. Rohatgi: Mater. Sci. Eng. A, 2004, vol. 383, pp. 323–33. https://doi.org/10.1016/j.msea.2004.04.060.10.1016/j.msea.2004.04.060 ↗
29. A. De Santis, O. Di Bartolomeo, D. Iacoviello, and F. Iacoviello: J. Mater. Process. Technol., 2008, vol. 196, pp. 292–302. https://doi.org/10.1016/j.jmatprotec.2007.05.056.10.1016/j.jmatprotec.2007.05.056 ↗
30. F. Alabbasian, S.M.A. Boutorabi, and S. Kheirandish: Mater. Sci. Eng. A, 2016, vol. 651, pp. 467–73. https://doi.org/10.1016/j.msea.2015.09.024.10.1016/j.msea.2015.09.024 ↗
31. R. Ghasemi, J. Olofsson, A.E.W. Jarfors, and I.L. Svensson: Int. J. Cast. Met. Res., 2017, vol. 30, pp. 125–32. https://doi.org/10.1080/13640461.2016.1261520.10.1080/13640461.2016.1261520 ↗
32. M. Mohd Rashidi and M.H. Idris: Mater. Des., 2013, vol. 51, pp. 861–69. https://doi.org/10.1016/j.matdes.2013.04.064.10.1016/j.matdes.2013.04.064 ↗
33. Z.-H. Wang, X. Zhang, F.-L. Xu, K.-C. Qian, and K.-M. Chen: China Foundry, 2019, vol. 16, pp. 386–92. https://doi.org/10.1007/s41230-019-9080-z.10.1007/s41230-019-9080-z ↗
34. A. Javaid, J. Thomson, K.G. Davis, and M. Sahoo: Trans. Am. Foundry Soc., 2001, vol. 109, pp. 1–18.
35. A.A. Tiamiyu, U. Eduok, J.A. Szpunar, and A.G. Odeshi: Sci. Rep., 2019, vol. 9, p. 12116. https://doi.org/10.1038/s41598-019-48594-3.10.1038/s41598-019-48594-3 ↗
36. Q. Yang, Y. Zhou, Z. Li, and D. Mao: Materials, 2019, vol. 12, p. 1455. https://doi.org/10.3390/ma12091455.10.3390/ma12091455 ↗
37. H.B. Li, Z.H. Jiang, Q.F. Ma, and Z. Li: Adv. Mater. Res., 2011, vol. 217–218, pp. 1180–84. https://doi.org/10.4028/www.scientific.net/AMR.217-218.1180.10.4028/www.scientific.net/AMR.217-218.1180 ↗
38. L. Onyeji and G. Kale: J. Mater. Eng. Perform., 2017, vol. 26, pp. 5741–52. https://doi.org/10.1007/s11665-017-3031-x.10.1007/s11665-017-3031-x ↗
39. P. Wang, L. Ma, X. Cheng, and X. Li: J. Alloys Compds., 2021, vol. 857, p. 158258. https://doi.org/10.1016/j.jallcom.2020.158258.10.1016/j.jallcom.2020.158258 ↗
40. A.H. Seikh: J. Chem., 2013, vol. 2013, p. 587514. https://doi.org/10.1155/2013/587514.10.1155/2013/587514 ↗
41. M. Soleimani, H. Mirzadeh, and C. Dehghanian: Mater. Res. Express, 2020, vol. 7, p. 016522. https://doi.org/10.1088/2053-1591/ab62fa.10.1088/2053-1591/ab62fa ↗
42. J.B. Sun, G.A. Zhang, W. Liu, and M.X. Lu: Corros. Sci., 2012, vol. 57, pp. 131–38. https://doi.org/10.1016/j.corsci.2011.12.025.10.1016/j.corsci.2011.12.025 ↗
43. H. Luo, C.F. Dong, X.Q. Cheng, K. Xiao, and X.G. Li: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1283–91. https://doi.org/10.1007/s11665-011-0030-1.10.1007/s11665-011-0030-1 ↗