journal article·2017-02

Effect of Cyclic Pre-deformation on Uniaxial Tensile Behavior of Cu-16 at. pct Al Alloy with Low Stacking Fault Energy

Y. Yan, C. J. Qi, D. Han, H. M. Ji, M. Q. Zhang, X. W. Li

Publisher page

Abstract

To explore the effect of cyclic pre-deformation on static mechanical behavior of materials with different stacking fault energies (SFEs), polycrystalline Cu-16 at. pct Al alloy with a low SFE is selected as the target material in the present work, and the strengthening micro-mechanisms induced by cyclic pre-deformation are compared with the previous studies on pure Al with a high SFE and Cu with an intermediate SFE. The results show that the movement of dislocations exhibits a high slip planarity during cyclic pre-deformation at different total strain amplitudes Δe t/2, and some nano-sized deformation twins are formed after subsequent tension. The cyclic pre-deformation at an appropriate Δe t/2 of 1.0 × 10−3 promotes a significant increase in ultimate tensile strength σ UTS nearly without loss of tensile ductility, which primarily stems from the introduction of many mobile planar slip dislocations by cyclic pre-deformation as well as the formation of nano-sized deformation twins during subsequent tension. Based on the comparison of the strengthening micro-mechanisms induced by cyclic pre-deformation in Al, Cu, and Cu-16 at. pct Al alloy, it is deduced that a low-cycle cyclic pre-deformation at an appropriate condition is expected to cause a better strengthening effect on the static tensile properties of low SFE metals.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881-981.10.1016/j.pmatsci.2006.02.003 ↗
2. Y. Estrin and A. Vinogradov : Int. J. Fatigue, 2010, vol. 32, pp. 898-907.10.1016/j.ijfatigue.2009.06.022 ↗
3. J.J. Williams, X. Deng, and N. Chawla: Int. J. Fatigue, 2007, vol. 29, pp. 1978-1984.10.1016/j.ijfatigue.2007.01.008 ↗
4. K.S. Al-Rubaie, M.A. Del Grande, D.N. Travessa, and K.R. Cardoso: Mater. Sci. Eng. A, 2007, vol. 464A, pp. 141-150.10.1016/j.msea.2007.02.024 ↗
5. T. Niendorf, C. Lotze, D. Canadinc, A. Frehn, and H.J. Maie: Mater. Sci. Eng. A, 2009, vol. 499A, pp. 518-524.10.1016/j.msea.2008.09.033 ↗
6. V. Močilnik, N. Gubeljak, J. Predan, and J. Flašker: Eng. Fract. Mech., 2010, vol. 77, pp. 3132-3142.10.1016/j.engfracmech.2010.07.014 ↗
7. D.Y. Ye, Y.D. Xu, L. Xiao, and H.B. Cha: Mater. Sci. Eng. A, 2010, vol. 527A, pp. 4092-4102.10.1016/j.msea.2010.03.027 ↗
8. Y. Yan, M. Lu, and X.W. Li: Acta Metall. Sin. (in Chinese), 2013, vol. 49, pp. 658-666.10.3724/SP.J.1037.2012.00684 ↗
9. U. Sánchez-Santana, C. Rubio-González, G. Mesmacque, and A. Amrouche: Int. J. Fatigue, 2009, vol. 31, pp. 1928-1937.10.1016/j.ijfatigue.2009.02.031 ↗
10. U. Sánchez-Santana, C. Rubio-González, G. Mesmacque, A. Amrouche, and X. Decoopman: Int. J. Fatigue, 2008, vol. 30, pp. 1708-1719.10.1016/j.ijfatigue.2008.03.011 ↗
11. U. Sánchez-Santana, C. Rubio-González, G. Mesmacque, A. Amrouche, and X. Decoopman: Mater. Sci. Eng. A, 2008, vol. 497A, pp. 51-60.10.1016/j.msea.2008.07.063 ↗
12. K. Mariappan, V. Shankar, R. Sandhya, M.D. Mathew, and A.K. Bhaduri: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 989-1003.10.1007/s11661-014-2676-4 ↗
13. J.G. Löpez, P. Verleysen, I. De Baere, and J. Degrieck: Procedia Eng., 2011, vol. 10, pp. 1961-1966.10.1016/j.proeng.2011.04.325 ↗
14. C. Froustey and J.L. Lataillad: Mater. Sci. Eng. A, 2009, vol. 500A, pp. 155-163.10.1016/j.msea.2008.09.051 ↗
15. Y. Yan, M. Lu, W.W. Guo, and X.W. Li: Mater. Sci. Eng. A, 2014, vol. 600A, pp. 99-107.10.1016/j.msea.2014.02.008 ↗
16. X.W. Li, X.M. Wang, W.W. Guo, C.J. Qi, and Y. Yan: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1631-1635.10.1007/s11661-013-1625-y ↗
17. Z.J. Zhang, P. Zhang, L.L. Li, and Z.F. Zhang: Acta Mater., 2012, vol. 60, pp. 3113-3127.10.1016/j.actamat.2012.02.016 ↗
18. P. Li, S.X. Li, Z.G. Wang, and Z.F. Zhang: Prog. Mater. Sci., 2011, vol. 56, pp. 328-377.10.1016/j.pmatsci.2010.12.001 ↗
19. S. Suresh: Fatigue of Materials, Cambridge University Press, Cambridge, 2001.
20. X.M. Wu, Z.G. Wang, and G.Y. Li: Mater. Sci. Eng. A, 2001, vol. 314A, pp. 39-47.10.1016/S0921-5093(00)01927-4 ↗
21. A. Abel, M. Wilhelm, and V. Gerold: Mater. Sci. Eng., 1979, vol. 37, pp. 187-200.10.1016/0025-5416(79)90084-3 ↗
22. Z.S. Basinski and S.J. Basinski: Prog. Mater. Sci., 1992, vol. 36, pp. 89-148.10.1016/0079-6425(92)90006-S ↗
23. M. Niewczas and G. Saada: Philos. Mag. A, 2002, vol. 82A, pp. 167-191.
24. Z.W. Wang, Y.B. Wang, X.Z. Liao, Y.H. Zhao, E.J. Lavernia, Y.T. Zhu, Z. Horita, and T.G. Langdon: Scripta Mater., 2009, vol. 60, pp. 52-55.10.1016/j.scriptamat.2008.08.032 ↗
25. A. Rohatgi, K.S. Vecchio, and G.T. Gray III: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 135-145.10.1007/s11661-001-0109-7 ↗
26. Y.T. Zhu, X.L. Wu, X.Z. Liao, J. Narayan, L.J. Kecskes, and S.N. Mathaudhu: Acta Mater., 2011, vol. 59, pp. 812-821.10.1016/j.actamat.2010.10.028 ↗